Birlea LYNX 6 User manual

CARE & MAINTENANCE:
HEALTH & SAFETY:
Rev 05
www.birlea.com of
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the chest as this will damage the base.
Always lift the chest with two people to reposition.
Keep any sharp objects away from the chest.
1
ASSEMBLY:
ASSEMBLY INSTRUCTIONS
LYNX 6 DRAWER CHEST
6
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE OR
USE YOUR LYNX 6 DRAWER CHEST.
DO NOT use this chest if any parts are missing, damaged or worn.
DO NOT use this chest unless all fixings are secured .
Always use on a level, even surface.
Page
Assembly should be carried out with this item laying flat, not standing upright.
Assemble on a soft, clean surface to prevent damages.
To erase the numbers printed on the pieces, use the rubber into the accessories pack.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Vendor: S000139

18
06
08
2
17
15
2
03
18
58
Plinth
Small Drawer Back
J
Large Drawer Back
17
Drawer Runners
Handles 5 x 60 mm Screw
1
Part
26
D
4.5 x 45mm Screw
6 of
1
N
17
Large Drawer Front
13
Drawer Base 1
1
1
Simple Minifix Screw
12
M
Bushing
Left Panel
02
10 x 10mm Tack
Cam Lock
05
Top Panel
05
Left Side Panel - Large Drawer
Strap
Spine
Descripion
Hardware List
Part
45
12
12
09
2
04
05
4
06
Double Minifix Screw
07
2
08
E
03
C
01
14
22
2
I
6 x 8mm Screw
1
05
Centre Panel
17
Plastic Cap
10
14
09
Back Panel
Right Side Panel – Large Drawer
Q
07
37
16
G
3 x 14mm Screw
Left Side Panel - Small Drawer
11
P
4
O
Small Drawer Front
Right Panel
15 05
4
Parts List
1
8 x 30mm Wooden Dowel
8 x 50mm Wooden Dowel
** You will need a small mallet and a
screwdriver for assembly.
** Some screws and wooden dowel
may remain.
04
01
Right Side Panel – Small Drawer
18
L
Descripion
K
16
15
12
A
6
13
H
4
12
6
1
2
410
6
F
02
11
Qty
Small Plastic Foot
6
2
2
Page
2
Qty
Glue
3.5 x 25mm Screw
12
Vendor: S000139

DO NOT use any power tools as this may damage the frame and will invalidate any claim.
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Attach three drawer runners (17) to each side of the centre panel (3) using hardware parts M and a
screwdriver (not provided). Insert hardware part A using a small mallet (not provided).
04
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
02
17
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
3
Step 3:
17
03
01
Attach three drawer runners (17) to the right panel (4) using hardware parts D and a screwdriver (not
provided). Insert hardware parts A and H using a small mallet and screwdriver (not provided).
Step 4:
Attach three drawer runners (17) to the left panel (2) using hardware part D and a screwdriver (not
provided). Insert hardware parts A and H using a small mallet and a screwdriver (not provided).
Step 2:
Insert hardware part H into the top panel (1) using a screwdriver (not provided).
Step 1:
Page of 6
HH
HH
D
A
A
H
H
M
A
A
MM
M
MM
M
D
H
H
A
A
Vendor: S000139
H
H

Step 6:
07
13
11
Attach the plinths (5) to the left panel (2), centre panel (3) and right panel (4) using hardware parts I
and L with a screwdriver (not provided).
12
10
05
Step 5:
2x
6
06
4
05
05
05
05
04
03
02
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
08
2x
05
09
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Insert hardware parts A, H and N using hardware part J, a small mallet and a screwdriver (not
provided).
Page of
I
I
I
I
I
I
I
I
L
L
L
H
H
AA
A
A
A
A
AA
H
H
J
A
A
A
A
AA
A
A
A
N
A
Vendor: S000139

Step 7:
of 5
15
18
18
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
01
Step 8:
Attach the top panel (1) using hardware part L. Attach hardware part K to the base using hardware part
G. You will need to use a screwdriver (not provided).
6 Page
15
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Connect the back panels (15) using the spine (18) and secure using harware part G and a small mallet
(not provided).
G
G
I
I
I
I
I
G
G
G
G
K
K
K
K
K
K
G
G
G
Vendor: S000139

17
06
Birlea Furniture advise you use the wall straps provided to further enhance the safety of this product
Step 10:
09
12
Additional Information:
08
16
11
To secure the item to the wall use hardware parts O, P and Q using a screwdriver (not provided).
Then attach hardware part D to the item with a screwdriver (not provided).
13
10
07
Why don't you send us photos of your assembled furniture to [e-mail] to be shared in
who will be able to resolve any issues with Birlea.
6 Page
www.birlea.com
17
Step 9:
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
14
17
14
Assemble the drawer components using hardware parts C, D, E, F, I and J with a screwdriver (not
provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
17
16
For complete product information, images and dimension diagrams please visit the website
our #birleahome feature on Instagram.
6 of
If you have any issues with your item please contact the retailer directly you purchased it from
P
1° 2°
I
J
D
F
F
J
D
E
Vendor: S000139
E
D
D
I
C
C
I
D
D
EE
C
CI
F
F
O
Q
D