Birlea SOHO 3 BED User manual

ASSEMBLY INSTRUCTIONS
SOHO 3' BED
Page 1 of 4
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR
SOHO 3' BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY :
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
WARNING: If this bed is placed on a non-carpeted floor you must place some protection under all
legs to stop the bed frame from moving. If this is not adhered to there is no guarantee if the bed
frame collapses.
CARE & MAINTENANCE:
Assemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
Vendor: S000053
Birlea
Suppliers of Inspiration

Page 2 of 4
PART LIST
PART
1 1 8
2 1 10
311
41
51
6
1
7
A
B
C
D
E 2
DESCRIPTION
Headend & Footend
Upper Side Support
Upper Side Support
Side Frame
M8 x 45mm JCBC Screw
M4
M5
DESCRIPTIONBOX QTY
HARDWARE LIST (FOUND IN BOX 1)
PART
IMPORTANT:DO NOT SCREW UP THE RACK TIGHTLY UNTIL ALL PARTS
ARE WELL SET WITH PROPER HARDWARES IN PLACE！！！
2
2
2
4
2
QTY
Vendor: S000053
1
Mid Support 1
Bottom Side Support
Slat 12
M6 x 10mm JCBC Screw
EVA Pad

Vendor: S000053
Step 2:
Page 3 of 4
Step 1:

Vendor: S000053
Step 3:Vendor: S000053 Step 3:
Step Step 44::
Page 4 of 4