Bissell 2907F User manual

Pet Hair Eraser Slim Cordless Vacuum
Cleaning Filters | Support
Maintaining your filters is very important to the function of your vacuum
The steps below provide instruction on how to clean and maintain your Dirt Tank and Filters
•If you are experiencing issues with reduced suction you'll want to follow the
complete list of steps before continuing > Go to No Suction
These steps are considered a part of routine maintenance
•Remove Dirt Tank from Hand Vac
•Grip the top portion of tank and pull up to remove the separator (the bottom ring of
the separator will activate to "wipe" debris from screen & deposit into tank)
oClean debris from Separator
oEmpty debris from Dirt Tank
•Twist the top to remove Filter from Separator
oRemove Pre Motor Filter and clear debris (machine should not be used without
Filters installed)
Pre Motor Filter can be rinsed in warm water > Allow to completely air dry (24 - 48
hours) before reinstalling

•Insert the Filter with tag towards the Filter Frame
•Insert Filter Frame into Separator > Separator into Dirt Tank
•Attach Dirt Tank to Hand Vac
oYou should hear a click when Tank is secure
•The Post Motor Filter is located on the back of the Hand Vac
oPinch the latch on the back of the Hand Vac > Remove Filter Cover
oPress up on bottom tab to pull Filter out
oPost Motor Filter can be rinsed in warm water > Allow to completely air dry (24 - 48
hours) before reinstalling