Bissell BGHIP6A Guide

New Equipment Warranty
Limited Warranty
The manufacturer gives you the following limited warranty for this product if it was originally
purchased for use, not resale, from BISSELL BigGreen Commercial or a BISSELL BigGreen
Commercial-Authorized Retail Dealer.
Lifetime warranty on roto-molded polyethylene tank, 5-years on motor and all electrical
parts, 90-days on tools. The manufacturer will repair or replace, free of charge, to the original
purchaser, warranted parts which are found to be defective in material or workmanship.
This limited warranty does not apply to any part subjected to accident, abuse, or alteration,
misuse, damage caused by re or act of God, the use of voltages other than indicated on the
serial number plate of this product or service of this product by other than a trained service
technician.
The manufacturer does not authorize any person or representative to assume or grant any
other warranty obligation with the sale of this product.
The manufacturer’s limited warranty is valid only if you retain proof of purchase from BISSELL
BigGreen Commercial or a BISSELL BigGreen Commercial-Authorized Retail Dealer for this
product. If you purchase this product from any other source, your purchase is“AS IS,” which
means the manufacturer grants you no warranty, and that you, not the manufacturer, assume
the entire risk of the quality and performance of this product, including the entire cost of any
necessary servicing or repairs of any defects.
The manufacturer’s liability for damages to you for any costs whatsoever arising out of this
statement of limited warranty shall be limited to the amount paid for this product at the
time of original purchase, and the manufacturer shall not be liable for any direct, indirect,
consequential or incidental damages arising out of the use or inability to use this product.
Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD, AND NO WARRANTIES, WHETHER
EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.
Some states do not allow limitations on the duration of implied warranties, so the above
limitation may not apply to you.
This warranty gives you specic legal rights, and you may also have other rights which vary
from state to state.
Make a copy of this card for future reference.
2015 © BISSELL BigGreen Commercial. All rights reserved.
2015 © BISSELL BigGreen Commercial. All rights reserved.
Important Information and Safety Instructions
Register your Machine – Return your Warranty Registration Card!
Serial No:
High Filtration HipVac
Reliable Power
Fastest Pick-Up
Maximum Airow
Innovative Design
Lightweight
Durable
REGISTER
YOUR
MACHINE!
Safety, Operation and Maintenance
Manual with Parts List
Please read before use!
Model BGHIP6A
6-Quart Capacity, 1.5 HP
BISSELL BigGreen Commercial
100 Armstrong Road | Suite 101 | Plymouth, MA 02360
Phone: [phone] | Fax: [phone]
www.bissellcommercial.com

(2) BISSELL BGHIP6A 6-Quart HipVac
Dear Valued Client,
Congratulations on the purchase of your BISSELL BigGreen Commercial BGHIP6A
6-Quart High Filtration HipVac! The world of carpet cleaning is becoming more high-
tech and competitive and we strive to provide you with the most innovative products. Our
backpack vacuum is yet another example of this, bringing a new dimension to carpet and
upholstery cleaning with its cutting-edge features, quality and value.
Please review this manual paying careful attention to the Safety Instructions section.
Keep in mind that any unnecessary damage, neglect or abuse of this machine will void
your warranty. You can be condent that simple maintenance will ensure that your
HipVac provides quality performance for many years to come.
If warranty questions arise, please consult your manual or contact your distributor.
Should you have any questions regarding maintenance, replacing parts or ordering parts,
please call an authorized distributor.
Before you begin using your HipVac, thoroughly review the Owner’s Manual.
Again, congratulations on the purchase of your BISSELL BigGreen Commercial
BGHIP6A 6-Quart High Filtration HipVac!
Questions or Comments?
BISSELL BigGreen Commercial
100 Armstrong Road | Suite 101 | Plymouth, MA 02360
Phone: [phone] | Fax: [phone]
www.bissellcommercial.com
Warranty Registration
Mail to:
BISSELL BigGreen Commercial
100 Armstrong Road | Suite 101 | Plymouth, MA 02360
See reverse side for warranty information.
Make a copy of this card for future reference.
2015 © BISSELL BigGreen Commercial. All rights reserved.
Please take a moment to register your machine. Fill out the
information below and mail back to BISSELL BigGreen Commercial
immediately.
The warranty starts on the purchase date by the original purchaser, subject to proof
of purchase. Please immediately register your machine by returning this Machine
Registration Card at the time of purchase. If proof of purchase cannot be identied,
the warranty start date is ninety (90) days after the inventory stocking date at the
distributor’s warehouse.
Machine Model Purchase Date
Motor Type Serial No.
Place of Purchase
Shipped To
Your Name Phone
E-mail Fax
Address Line 1
Address Line 2
City State Zip
Comments:
©2015 BISSELL BigGreen Commercial. All rights reserved. All word marks, logos,product
congurations and registered trademarks are owned and used under the authority of BISSELL
BigGreen Commercial.

BISSELL BGHIP6A 6-Quart HipVac (3)
Table of Contents
New Equipment Warranty...................................................................................................4
Returned Material Authorization (RMA) Procedure ..........................................................4
1.0 Safety Instructions .......................................................................................................5
2.0 Grounding Instructions ................................................................................................6
3.0 Care of your HipVac Cleaner.......................................................................................7
4.0 Operating and Assembly Instructions. .........................................................................8
5.0 Trouble Shooting Guide.............................................................................................10
6.0 Machine Schematic Drawing.....................................................................................11
7.0 Machine Parts List .....................................................................................................12
8.0 5-Piece Standard Tool Kit ..........................................................................................13
Please ll out the following information:
Model No:
Serial No:
Distributor Name:
Distributor Phone No:
Date of Purchase:
High Filtration 6-Quart HipVac
By BISSELL BigGreen Commercial
2015 © BISSELL BigGreen Commercial. All rights reserved.
BISSELL BigGreen Commercial
100 Armstrong Road | Suite 101 | Plymouth, MA 02360
Phone: [phone] | Fax: [phone]
www.bissellcommercial.com

(4) BISSELL BGHIP6A 6-Quart HipVac BISSELL BGHIP6A 6-Quart HipVac (13)
8.0 5-Piece Standard Tool Kit
Drawing No. Item No. Description Quantity
110-0031 5” Upholstery Tool 1.00
210-0037 3” Round Dust Brush 1.00
310-0032 14” Scalloped Floor Tool 1.00
410-0033 17” Crevice Tool 1.00
510-0029 2-Piece, 2-Bend Button Lock Wand 1.00
* Optional 15” Power Head Available.
123
4
5
New Equipment Warranty
Lifetime on roto-molded polyethylene tank, 5-years on motor and all electrical parts, 90-days on
tools and accessories.
Limited Warranty
The manufacturer gives you the following limited warranty for this product if it was originally purchased
for use, not resale, from BISSELL BigGreen Commercial or a BISSELL BigGreen Commercial-Authorized Retail
Dealer.
Lifetime warranty on roto-molded polyethylene tank, 5-years on motor and all electrical parts, 90-days on
tools. The manufacturer will repair or replace, free of charge, to the original purchaser, warranted parts
which are found to be defective in material or workmanship.
This limited warranty does not apply to any part subjected to accident, abuse, or alteration, misuse, damage
caused by re or act of God, the use of voltages other than indicated on the serial number plate of this
product or service of this product by other than a trained service technician.
The manufacturer does not authorize any person or representative to assume or grant any other warranty
obligation with the sale of this product.
The manufacturer’s limited warranty is valid only if you retain proof of purchase from BISSELL BigGreen
Commercial or a BISSELL BigGreen Commercial-Authorized Retail Dealer for this product. If you purchase
this product from any other source, your purchase is “AS IS,” which means the manufacturer grants you no
warranty, and that you, not the manufacturer, assume the entire risk of the quality and performance of this
product, including the entire cost of any necessary servicing or repairs of any defects.
The manufacturer’s liability for damages to you for any costs whatsoever arising out of this statement of
limited warranty shall be limited to the amount paid for this product at the time of original purchase, and
the manufacturer shall not be liable for any direct, indirect, consequential or incidental damages arising out
of the use or inability to use this product.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above
limitation or exclusion may not apply to you.
ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT, INCLUDING IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
LIMITED IN DURATION TO THE WARRANTY PERIOD, AND NO WARRANTIES, WHETHER
EXPRESS OR IMPLIED, WILL APPLY AFTER THIS PERIOD.
Some states do not allow limitations on the duration of implied warranties, so the above limitation may not
apply to you.
This warranty gives you specic legal rights, and you may also have other rights which vary from state to
state.
©2015 BISSELL BigGreen Commercial. All rights reserved.
All word marks, logos,product congurations and
registered trademarks are owned and used under
the authority of BISSELL BigGreen Commercial.
Returned Material Authorization (RMA) Procedure
Original purchaser (distributor/service center) must contact the manufacturer to follow correct RMA/
warranty procedures. Must include a copy of RMA Sheet enclosed in the box with returned item. No returns
shall be authorized unless proper RMA procedures are followed. It is the responsibility of the distributor to
repair the client’s equipment as soon as possible. If the distributor does not have the facilities to repair the
equipment, it may be shipped or taken to an authorized service center for repair.
Client must contact the distributor prior to working on or changing out any parts, etc. Manufacturer must
issue an RMA Sheet containing approved labor time and replacement parts. Do not send parts or equipment
back to manufacturer without an RMA number and approval. No labor will be paid for, nor part costs paid
for or reimbursed that have not been previously approved by the manufacturer. All warranty work must be
approved and authorized to qualify and appropriate warranty procedures must be followed.

(12) BISSELL BGHIP6A 6-Quart HipVac BISSELL BGHIP6A 6-Quart HipVac (5)
1.0 Safety Instructions
READ THIS MANUAL BEFORE OPERATING. KNOW THE PROPER
OPERATION, CORRECT APPLICATIONS AND THE LIMITATIONS OF THIS
EQUIPMENT BEFORE USE.
This HipVac will afford you many years of trouble free operating satisfaction, provided
it is given the proper care. All parts have passed rigid quality control standards prior to
being assembled to produce the nished product. Prior to packaging, your HipVac was
again inspected for assurance of awless assembly.
This HipVac is protectively packed to prevent damage in shipment. We recommend that
upon delivery, unpack the unit and inspect it for any possible damage. Only a visual
inspection will reveal damage that may have occurred.
If damage is discovered, immediately notify the transportation company that delivered
your vacuum. As a shipper, we are unable to report any claim for damage. You must
originate any claim within ve (5) days.
This manual is for your protection and information. Please read carefully since failure to
follow precautions could result in discomfort or injury.
Reduce the Risk of Fire, Electric Shock or Injury
DO NOT USE ON WET SURFACES. DO NOT EXPOSE TO RAIN. STORE
INDOORS.
• DO NOT leave the vacuum when plugged in. Unplug from the outlet when not in use
and before servicing.
• DO NOT vacuum up any liquids. This vacuum is for dry use only! To avoid electric
shock, DO NOT expose to rain. Store indoors. DO NOT use on wet surfaces.
• This is not a toy. Close attention is necessary when used around or near children.
• Use only as described in this safety manual. Use only manufacturer’s recommended
attachments, accessories, replacement parts and lters.
• DO NOT use this vacuum with damaged cord or plug. If the vacuum is not working as
it should because it has been dropped, damaged, left outdoors or dropped into water,
contact an authorized service center or factory.
• DO NOT pull or carry by the cord, use cord as a handle, close a door on the cord, or
pull the cord around sharp edges or corners. Keep cord away from heated surfaces.
• DO NOT unplug the vacuum by pulling the cord. To unplug, grasp the plug, not the
cord.
• DO NOT handle the plug of the vacuum with wet hands.
• DO NOT put objects into openings. DO NOT use with any opening blocked. Keep
free of dust, lint, hair and anything that may reduce air ow.
• Keep hair, loose clothing, ngers, and all body parts away from opening and moving
parts.
• DO NOT pick up anything that is burning or smoking such as cigarettes, matches or
hot ashes.
7.0 Machine Parts List
Item No. Part No. Description Qty.
1 HP-6-D-GREEN HipVac Door - BISSELL Green 1
2 10-0003 Lid Latch 4
3 10-0004 Lid Rivet 4
4 90-1024 Back-Up Washer 4
5 10-0205 Body Rivet 1
6 10-0204 Motor Mount Back-Up Washer 2
7 10-0055-L HipVac Waist Belt Screw - Long 2
8 10-0217 HipVac Waist Belt Washer 2
9 10-0021-BIS.HIPSTER BISSELL Shoulder and Waist Belt 1
10 10-0028 2-Foot Power Cord 1
11 10-0422-BIS.HIPSTER BISSELL Powerhead 1
12 10-0027-A Strain Relief Nut 1
13 10-0027 Pigtail Strain Relief 1
14 10-0026 Power Cord 1
15 10-0217 HipVac Waist Belt Washer 1
16 10-0055-S HipVac Waist Belt Screw - SHORT 1
17 HP-6-L-GREEN HipVac Threaded Lid (Hose) - BISSELL Green 1
18 10-0024 1-1/2" Black Vacuum Hose (NO CUFF) 4
19 10-0195 Swivel Cuff 1
20 10-0050-B Vac Rivet 2
21 90-1024 Back-Up Washer 2
22 HP-6-T-GREEN HipVac Tank - BISSELL Green 1
23 10-0007-6 6qt. Cloth Bag for 6qt. HipVac 1
24 10-0197 6qt. Paper Bags (10 Pack) 0.1
25 HP-6-B-BLKGRAN HipVac Base - Black Granite 1
26 10-0028 50-Foot Electrical Cord 1
27 10-0027 Pigtail Strain Relief 1
28 10-0027-A Strain Relief Nut 1
29 10-0219-H Complete HEPA Filter w/ Bag Support 1
30 10-0013 HipVac Super Motor 1
31 10-0199 Vacuum Motor Gasket 1
32 10-0015 1/4" Flat Washer 4
33 10-0014 Motor Screw 4
34 10-0074 Flat Washer #8 SAE 4
35 10-0216 Allen Head Screw for Backpack 4
36 10-0004 Lid Rivet 2
37 10-0202 Grommet for HipVac Lid 1

(6) BISSELL BGHIP6A 6-Quart HipVac BISSELL BGHIP6A 6-Quart HipVac (11)
1.0 Safety Instructions Continued
Reduce the Risk of Fire, Electric Shock or Injury Continued
• DO NOT use without the proper cloth ltration bag, paper lter bag and other lters in
place. Failure to do so, will VOID your warranty.
• DO NOT use the vacuum to pick up ammable or combustible liquids such as
gasoline or use in areas where they may be present.
• Use extra care when cleaning on stairs.
• DO NOT use where oxygen or anesthetics are used.
• Turn off all controls before unplugging. Make sure the on/off switch is in the OFF
position.
• The extension cord provided with this unit is 50-foot, 16/3-gauge wire and MUST be
used with this unit to ensure grounding protection.
• Replace damaged or worn parts immediately with genuine, original equipment parts to
maintain safety and to protect your limited warranty.
• DO NOT lubricate the motor.
• DO NOT tie extension cord to pigtail cord. This will damage the cord and will not be
covered under warranty.
• DO NOT overstretch the safety power cord between the vacuum and the electrical
outlet in the wall.
• DO NOT use without all lters correctly secured in place.
• When using the vacuum with a powerhead tool and connection, always turn off the
vacuum and nozzle tool before connecting or disconnecting either the hose or power
nozzle. Depending on your vacuum model, the hose may contain electrical wires.
DO NOT use when damaged, cut or punctured.
Always turn OFF the vacuum before connecting, disconnecting or working on the
vacuum. This vacuum must be connected to a properly grounded outlet only (see
grounding instructions).
2.0 Grounding Instructions
DANGER: IMPROPER GROUNDING METHOD CAN RESULT IN A RISK OF
ELECTRIC SHOCK.
Electrical equipment must be grounded. If it should malfunction or breakdown,
grounding provides a path of least resistance for electrical current to reduce the risk of
electric shock. The vacuum is equipped with a cord containing a grounding conductor
and grounding plug. The plug must be inserted into an appropriate outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
If repair or replacement of the cord or plug is necessary, DO NOT connect the grounded
wire to a at bed terminal. The wire with insulation having an outer surface that is green
with or without yellow stripes is the grounding wire.
6.0 Machine Schematic Drawing

(10) BISSELL BGHIP6A 6-Quart HipVac BISSELL BGHIP6A 6-Quart HipVac (7)
2.0 Grounding Instructions Continued
Grounding Method
This electric equipment is for use on a normal 120 volt circuit. It has a grounded plug that
looks like a the plug illustrated in (Fig A). A temporary adapter that looks like the adapter
illustrated in (Fig B and C) may be used to connect this plug into a 2-pole receptacle as
shown in (Fig B) if a properly grounded outlet is not available.
The temporary adapter should be used only until a properly grounded outlet (Fig A) can
be installed by a qualied electrician. The green color rigid ear lug or the like extending
from the adapter must be connected to a permanent ground such as a properly grounded
outlet box cover. Whenever the adapter is used, it must be held in place by a metal screw.
WARNING:
Improper connection of the equipment grounding conductor can result in a risk of electric
shock. Check with a qualied electrician or service person if you are in doubt as to
whether the outlet is properly grounded. DO NOT modify the plug provided with the
equipment. If it will not t into the outlet, have a proper outlet installed by a qualied
electrician.
NOTE: In Canada, the use of a temporary adapter is not permitted by the Canadian
Electrical Code.
3.0 Care of your HipVac Cleaner
Treat your vacuum cleaner as you would any other high grade, precision made product.
Dropping, unreasonable bumping across thresholds and other misuses may result in a
damaged unit which will not be covered under warranty.
When not in use, the power cord should be wrapped around the molded-in cord wrap
for storage. After each use, wipe the vacuum body, accessories and power cord with a
slightly damp cloth.
WARNING: DO NOT use vacuum without the proper cloth ltration bag, paper
lter bag and other lters in place. Failure to do so, will VOID your warranty.
If using vacuum in a paint, sawdust or drywall environment, you must dispose of
paper lter bag and shakeout cloth lter bag after each use. Failure to do so will
cause severe damage to your vacuum and void your warranty. Dispose of paper lter
bag in a reproof container. The combination of urethane and wood, may result in a
combustion.
5.0 Troubleshooting Guide
CAUTION: Always disconnect power cord before servicing vacuum.
WARNING: Repairs should only be performed by an authorized service center.
PROBLEM: Loss of vacuum
CAUSE SOLUTION
Cap is damaged Inspect and replace if needed
Faulty vacuum motor Call manufacturer or service center
Full paper bag lter Replace paper lter bag
Clogged hose or wand Remove obstruction
Loose or broken fan Call manufacturer or service center
PROBLEM: Motor is not running
CAUSE SOLUTION
Faulty on/off switch Call manufacturer or service center
Power cord defective Call manufacturer or service center
Loose connection or wiring Call manufacturer or service center
Motor defective Call manufacturer or service center
Blown fuse or tripped circuit breaker Replace fuse or reset circuit breaker
PROBLEM: Dust blowing from vacuum when running
CAUSE SOLUTION
Full paper bag Replace lter bag
Paper lter bag not installed properly Reinstall or replace paper lter bag properly
Cloth lter bag is dirty Clean cloth lter bag
Cloth or paper lter bag is torn Replace

(8) BISSELL BGHIP6A 6-Quart HipVac BISSELL BGHIP6A 6-Quart HipVac (9)
4.0 Operation and Assembly Instructions
PREPARATION AND OPERATION. DRY ONLY!
This vacuum is equipped with an air-thru motor and is designed for dry pickup only.
Unpack the carton and remove the vacuum and attachments (if purchased with tools).
Getting Started:
1. Make sure your on/off switch is in the OFF position.
2. Remove lid and check to make sure you have both a cloth lter bag and paper lter
bag in place. Secure lid back onto the vacuum body, tightening securely. Both bags
must be used at all times. Any damage resulting from the lack of using both bags will
not be covered under warranty.
3. Do not tie or loop the pigtail cord with the extension cord.
4. Loosen the shoulder and waist belt straps and slide vacuum on.
5. Connect and tighten waist belt ensuring that majority of the weight is on your hips,
not your shoulders.
6. Adjust the shoulder straps for comfort.
7. Connect the sternum straps for added support and ideal t.
8. Plug your vacuum into a properly installed outlet.
9. Turn unit on and proceed with vacuuming.
10. Always store vacuum, safety power cord and tools in a cool dry place indoors.
NOTE: The weight of the vacuum should be distributed on your hips. Adjust any strap as
needed for your custom t.
To Change Paper Filter Bag:
1. Unscrew lid from body.
2. Remove full paper bag from the tank and dispose of
properly.
3. Take new paper lter bag and set inside cloth lter bag,
expanding it to the sides of the cloth lter bag.
4. Reinstall the lid, clamping the lid latches down tightly.
Cloth Filter Maintenance:
The cloth lter should be inspected and cleaned each time you empty the tank. DO NOT
wash the cloth lter. It could cause shrinkage of the cloth and damage to the gasket.
Simply shake off any dust or loose particles and brush the exposed surface with a soft
bristle brush.
CAUTION: Always exercise caution when handling the vacuum. Dropping the vacuum
could cause permanent damage to the internal components.
4.0 Operation and Assembly Instructions Continued
HEPA Models:
When the white disk inside your dome lter is discolored, replace it with a new HEPA
lter with bag support. Replacement time frame of the HEPA lter depends on the
frequency and application of use. For best results, replace every six (6) months.
IMPORTANT:
Following the instructions above is critical in prolonging the life of your vacuum. All
lters must be used at all times.
The vacuum comes assembled you will need to install the hose to the wand, and the wand
to the attachment.
Assembly of Attachments:
Wand Assembly (for 2-Piece Wand Only):
• Align the button lock of the upper wand section with the opening
for the button lock on the lower wand section.
• Push the sections together until the button lock slides into place
and the lock is secured.
To Connect Wand to Hose:
• Connect the tapered end of the wand to the swivel cuff at the end
of the hose.
To Connect Wand to Attachments:
• Turn wand nut counterclockwise approximately four (4)
complete turns.
• Insert the tool into wand and coupling.
• While holding the tool in place, turn nut clockwise until wand
nut is fully locked.