Bissell DEEPCLEAN PREMIER Troubleshooting guide

BISSELL is happy to be of service.
Contact us directly at 1-800-237-7691 or
visit the website for helpful instructions at
www.bissell.com
Quick Start
Guide
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE
PLEASE KEEP FOR FUTURE REFERENCE
BISSELL Homecare, Inc.
P.O. Box 1888
Grand Rapids, MI 49501
© 2012 BISSELL Homecare, Inc.
Phillips head screw driver is needed for assembly
*Color and pack-ins vary by model
Package contents:
b.
f. g.
d. e.c.
a. Machine Base & Tank-in-Tank System
b. Upper Handle
c. 3 Screws – taped to handle
d. Upper Hose Rack
e. Upper Tool Holder
f. Measuring Cup
g. 3" Tough Stain Tool*
h. Stain Trapper Tool*
i. Deep Reach Tool*
j. Turbobrush®Tool*
k. 6" Stair Tool*
l. Bare Floor Tool*
m. 2-in-1 Crevice Tool*
n Tool Storage Bag*
o. Trial-Size Formula*
Carpet cleaning
Cleaning with attachments
1. While pressing the trigger, make one slow forward
wet pass and another one back
2. Release the trigger and make one slow forward
and backward pass over the same area. Repeated
passes will help aid in dry time
3. Continue passes until cleaning area is complete
4. When the dirty water reaches the “FULL” line on the tank,
it is time to empty
5. Empty dirty water by removing tank from base of machine. Carry to sink
or outside to dispose of water. Unlatch top of tank and pour dirty water
through rectangle shaped opening in corner
6. Rell as needed, following steps 4 & 5 under "Before you begin cleaning"
1. Make sure handle of machine is locked in upright position
2. Attach the cleaning tool to the end of the hose
3. Clean by pressing the trigger to spray solution onto the area to be cleaned
4. Slowly scrub the tool back and forth over the soiled surface
5. Tilt the tool forward and release spray trigger to suction liquid
WARNING: Refer to the enclosed user guide for complete
instructions and important safety notices.
4.
Refer to the User’s Guide for full instructions on how to clean, store and maintain your machine
For additional tips and troubleshooting
Please refer to User's Guide
Visit: www.bissell.com
120-4616 m.k. n. o.
h.
i.
a.
l.j.
6.5.
TM

1. Slide upper handle onto machine base
2. Screw 2 screws into the marked holes
3. Attach the upper tool holder (select models) to the upper handle by
snapping the bottom half in rst, then snapping in the top half.
4. Place upper hose rack onto back of upper handle, and secure with screw
5. Wrap power cord to the left and ex hose to the right of the upper hose rack
6. Attach tool to hose grip
1. Move furniture to another area if cleaning an entire room
2. Remove large dirt and debris from carpet (See User's Guide for more details)
3. Pre-treat spots & stains and heavy trafc areas (optional – see User's Guide)
4. Fill the clean water tank
4a. Unlatch the top by lifting up on the latches on each side of the tank
4b. Remove the top
4c. Pour 5 ounces of formula into the heavy duty bladder (ll the included
measuring cup twice). Fill the rest of the way with hot tap water (do not
boil or microwave water).
4d. Re-attach top by lining up and securing the latches on the sides
of the tank
5. Plug into outlet, and turn the power switch on
NOTE: Heatwave Technology™ helps keep hot water hot
while the machine is in use. Simply turn the machine on to
activate Heatwave.
Your assembly is now complete.
4a.
4d.
4b. 4c.
5.
1.
4b.
6.
2. 3.
4a.
5.
For complete user's guide, visit www.bissell.com
Assembly Before you begin cleaning
WE CAN’T WAIT TO HEAR FROM YOU!
Rate this product and let us (and millions of your
closest friends) know what you think!
Visit your retailer’s website or www.bissell.com.