BJ Live SHX Fan User manual

c.Mare de Déu del Coll, 70,Local|08023|Barcelona|Spain|t.+34 93 285 04 37|fax + 34 93 553 56 34| [email protected] | www.bjliveat.com
BJ-EX41 SHX Fan
Instructions manual

BJ-EX41 SHX Fan
Page 2
Instructions manual
BJ-EX41 SHX Fan
1_Components of SHX Fan
SHX Fan Enabler Socket+
2_Configuration of SHX Fan and Enabler Socket+
Remove the product's packaging in a suitable way.
Please read the whole manual to familiarise yourself with the
characteristics before using the device.
1.1_Contents
Unpack the products from their boxes and check the contents. Enclosed with SHX fan there
should be a manual, in another box there should be an Enabler socket+ with its instruction
manual. It is recommended to keep the boxes for the duration of the warranty period in
case you need to use them again. If you want to dispose of the packaging, please do so
responsibly.
If you find any damage or any material is missing when you unpack the kit, please contact
your distributor for assistance. Any damage or breakage caused during transport must be
notified within three days of receipt.
The fan should only be used where there is a power socket.

BJ-EX41 SHX Fan
Page 3
Instructions manual
BJ-EX41 SHX Fan
1.2_Specifications of the SHX Fan
Adapter 240V (AC) 50Hz to 3V(DC)
2_ Instructions for use
The SHX Fan is ready for use so you just have to connect the adapter and then the
adapter to the socket plus+ so it can be used with the SHX system.
The Enabler Socket+ used for the SHX Fan should have the blue selector in position
0and the yellow selector in position from 1 to F (Timed), depending on the time the
user wants the device to be on.
Function
selector
position
Operating mode
0
Latched
1
Timed 1s
2
Timed 2s
3
Timed 3s
4
Timed 5s
5
Timed 10s
6
Timed 15s
7
Timed 30s
8
Timed 45s
9
Timed 60s
A
Timed 1min 30s
B
Timed 2min
C
Timed 2min 30s
D
Timed 3min
E
Timed 4min
F
Timed 5min
The configuration of the Enabler Socket+ is preset in the SHX control software:

BJ-EX41 SHX Fan
Page 4
Instructions manual
BJ-EX41 SHX Fan
Act code 28
On code 74
Off code 58
3_Cleaning and Maintenance
Clean the surface of the SHX Fan regularly to ensure the good performance of the
device. It must be disconnected from the power supply before cleaning. Clean using
soapy water and a soft cloth (wrung out). Never use chemical or abrasive products for
cleaning. Thoroughly dry the surface and wait one hour to connect to the power supply
4_Regular Inspections
A periodic inspection of the devices is recommended; if any faults are detected contact
your distributor for assistance.
The product should always be used under adult supervision.
5_Safety Guidelines
Correct and supervised use of this equipment will ensure it can be used for a long time.
The SHX fan is designed to create a sensory effect; it is not designed for direct use
with users.
IMPORTANT: Never leave users without adult supervision while using this product.
Suitable for use in therapies with several users simultaneously.