BJ Live SHX Fan User manual

User's Manual
Product name
Version
February 2017
References included in this manual
BJ-EX41
SHX Fan
User's Manual

User's Manual
SHX Fan
Please read the whole manual before you start.
The product should always be used under
adult supervision.
The SHX fan is designed to create a sensory
effect, it is not designed for direct use with
users.
It must be disconnected from the power
supply before cleaning.
If you find any damage or any material is missing when you unpack
the product, please contact BJ Adaptaciones. It is recommended to
keep the boxes for the duration of the warranty period in case you
need to use them again.
Safety Precautions
1. Introduction to the product
Turn on the fan in any SHX scene when you want to recreate wind or
coolness and enjoy the feeling.
2. Product components
Fan BJ-234 Enabler Socket+

SHX Fan
Page 3
3. Before you start: conditions for correct operation
-The fan should only be used where there is a power socket.
-The fan can be wall mounted. Wall attachments are not included.
4. Product use
-The SHX fan is ready to interact with the SHX room.
-It is only necessary to connect the power supply and this in turn to the
BJ-234 Enabler Socket+
-The fan is switched on and off from the Control SHX software and via the
various control elements.
5. Maintenance and cleaning
-Clean the surface of the SHX Fan regularly to ensure the correct
performance of the device.
-It must be disconnected from the power supply before cleaning.
-Clean using soapy water and a soft cloth (wrung out).
-Never use chemical or abrasive products for cleaning.
-Thoroughly dry the surface and wait one hour to connect to the
power supply.
6. Additional information
If the Socket+ configuration is lost:
-See enclosed product manual
-The configuration of the socket+ for use with the BJ SHX control
software must be as follows:

User's Manual
SHX Fan
Action Act: code 28
Action ON: code 74
Action OFF: code 58
Yellow wheel: position 6 - 15 seconds
Blue wheel: position 0
Warranty
Within the legal warranty period we agree to rectify for free by repairing or
replacing defects in the product derived from defective materials or
manufacturing defects.
Any unauthorised alteration or modifications to the product will void this
warranty.
Contacting technical and after-sales service
If you find any damage or any material is missing please contact our
technical service for assistance.
Any damage or breakage caused during transport must be notified within
three days of receipt.
Calle Mare de Déu del Coll, 70,Local
08023 Barcelona
Spain
t.+34 93 285 04 37
fax + 34 93 553 56 34|
[email protected]