Black & Decker Price Pfister Treviso 26 Series User manual

A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
Copyright
©
2005, Price Pfi ster, Inc.
© 2005, Price Pfi ster, Inc. ©
07-12-05 EO6835G
29618-0200
26 Series
Serie 26
Série 26
Single Control Kitchen Faucet With
Side Spray and Soap Dispenser
Grifo Monomando Con Rociador Lateral y
Dispensador De Jabón
Robinet De Cuisine Avec Un Douchette

ENGLISHENGLISH
ENGLISH
2
3
4
5
6
Thank you for purchasing this Price Pfi ster product. All Price Pfi ster products are carefully engineered, and factory tested to
provide long trouble-free use under normal conditions. This valve is easy to install using basic tools and our easy to follow
illustrated instructions. If you have any questions regarding this product, call 1-800-Pfaucet (1-800-732-8238).
1 BEFORE PROCEEDING
WARNING: Read all the instructions completely before proceeding. Price
Pfi ster recommends calling a professional if you are uncertain about installing
this product!
This product should be installed in accordance with all local and state plumbing and
building codes.
2 SHUT OFF WATER SUPPLY
Locate water supply inlets and shut off the water supply valves. These are
usually found under the sink or near the water meter. If you are replacing an
existing faucet, remove the faucet from the sink and clean the sink surface
thoroughly.
3 TOOLS RECOMMENDED
•Plumber's putty
•Slotted screwdriver •Pliers
•Adjustable wrench •Flashlight •Cloth
Your installation may require new supply lines and / or shut-off valves or other
additional tools.
INSTALLATION
4
CHECKING THE CONTENTS OF THE BOX
Upon opening the box, check to ensure that all of the following items are included:
A
Spout Body
B
Valve Body
C
Side Spray
D
Hose Guide with Flange
E
Base Ring
F
Gaskets
G
Plastic
Washer &
Locknut
H
Metal Washer
J
Long Nut
K
Soap Dispenser
L
Diverter
M
Clip
I
f any of these items are missing, please contact Price Pfi ster Consumer
Services at 1-800-Pfaucet (1-800-732-8238).
5 SPOUT BODY INSTALLATION
Place Gasket (
5A
) under b
ase of Spout Body
(
5B
). From above sink, insert
Mounting Shank (
5C
)
through center hole of sink.
6 SECURING SPOUT BODY
From underneath sink, place large Plastic Washer (
6A
),
and Locknut (
6B
) onto
Mounting Shank (
6C
)
.
Tighten faucet fi rmly to sink.
2
5B
G
H
K
L
M
F
A
B
C
D
E
J
6C
5A
5C
6B
6A

ENGLISHENGLISH
ENGLISH
7
8
9
10
7 CONTROL BODY INSTALLATION
Hold
Base Ring (
7A
) to Control Body (
7B
) and place Gasket (
7C
) under
Base
Ring (
7A
).
From above sink, insert Threaded Shank (
7D
) and Flexible Tubing
(
7E
) through side hole of sink.
7E) through side hole of sink.7E
8 SECURING CONTROL BODY
From underneath sink, secure Control Body (
8A
) by placing Metal Washer (
8B
)
and threading Long Nut (
7
/
16
Hex.) (
8C
) onto Mounting Post (
8D
). Make sure
that the bumps on Metal Washer (
8B
) are facing up. Tighten loosely, make sure
Handle (
8D
) swings equally in both directions. Firmly hand tighten Long Nut
(
8C
). Secure Long Nut (
8C
) not to exceed a 1/4 turn.
Caution: Do not over tighten!
9
GUIDE FLANGE & DISPENSER SHANK INSTALLATION
I
nsert Hose Guide (
9
A
9A9
)
through
Hose Guide Flange (
9
B
) and
i
nsert Soap Dispenser
Shank (
9
C
) through Foam Gasket (
9
D
)
and
into the sink holes.
If desired, place a
small bead of plumber’s putty to the underside of Hose Guide Flange (
9
B
). (Both
Guide Flange and Dispenser Shank can be placed in either
hole).
10
SECURING HOSE GUIDE
& SOAP DISPENSER SHANK
From underneath sink, secure Hose Guide (
10A
) and Soap Dispenser Shank
(
10B
) by screwing Plastic Locknuts (
10
C
) and (
10D
). T
hread on Bottle (
10E
) to
10E) to 10E
Soap Dispenser
Shank (
10B
).
Hand tighten.
Caution: do not over tighten!
3
7B
8A
9A
10A
10A
7D
7A
7C
7E
8D
8B
8C
9B
9C
9D
10B
10C
10D
10E
8D

ENGLISHENGLISH
ENGLISH
11 13
14
12
11 SIDE SPRAY INSTALLATION
Insert Side Spray Hose (
11A
) through Hose Guide (
11B
).
12
DIVERTER INSTALLATION
Push
Diverter Tee
(
12A
) all the way up until completely seated
onto Mountinhg
Shank (
12B
)
.
Slide
Clip (
12
C
) into
Diverter Holes
(
12
D
),
to secure
unit
.
13 HOSE ATTACHMENTS
From underneath sink, push
Outlet Hose
Fiting (
13
A
13A13
),
fi rmly onto the Diverter
Receiving Tube (
13
B
) until unable to push any further. Connect Spray Hose
Fitting (
13C
) into Diverter Oulet Collet (
13D
)
until unable to push any further.
Pull
out on connection Fittings (
13
A
13A13
& 13C
A & 13CA
). If the Fittings (
13A & 13C
) and the Inner
Collets (
13
E
) separate slightly but do not pull off, the
E) separate slightly but do not pull off, theE
connections are secure.
14 SOAP DISPENSER INSTALLATION
Pour in liquid soap (not included) into Shank Orifi ce (
14A
). Insert Pump
Mechanism (
14B
) into
Soap Dispenser Shank (
14C
)
. Install Dispenser Head
(
14D
) by pushing fi rmly onto Pump Mechanism (
14B
).
4
13D
11A
12A
12A
14A
14A
11B
12B
12C
12D
13C
13B
13A
13A
13A
13A
13E
13D
13C
13E
13B
14C
14B
14D

ENGLISHENGLISH
ENGLISH
19
16
15
17
18
20
15 WATER SUPPLY CONNECTIONS
Connect water Supply Lines (
15A
) to Faucet Inlets (
15B
). Hot water supply line
goes to hot inlet fi tting indicated by red tag (
15C
). (Supply lines not included).
Follow manufacturer’s instructions when installing supply lines
.
FAUCET FUNCTIONS
17 SPOUT FUNCTION
Spout (
1
7
A
7A7
) can be rotated around the Faucet Body in any direction.
18 VALVE FUNCTION
B
y lifting Lever Handle (
1
8
A
8A8
) up, the valve will be activated allowing water to
fl ow. The water fl ow will increase by continuing to lift up Lever Handle (
1
8
A
8A8
).
By rotating Lever Handle (
1
8
A
8A8
) counterclockwise, the water temperature will
decreased to fully cold. By rotating Lever Handle (
1
8
A
8A8
) clockwise, the water
temperature will increased to fully hot.
19 SIDE SPRAY OPERATION
Side Spray (
1
9
A
9A9
) can be pulled forward to spray water in any direction. To
activate the Side Spray (
1
9
A
9A9
), press Toggle Button (
1
9
B
) located on the back
of Side Spray (
1
9
A
9A9
).
20 SOAP DISPENSER OPERATION
To activate
Soap Dispenser
(
20
A
20A20
)
, press
Dispenser Head (
20
B
)
to spray liquid
soap.
16 UNIT START UP
T
urn on hot and cold water supplies, and check for leaks above and below the
sink
.
5
19A
19A
19A
19A
19B
15A
15A
15A
15A
15B
15B
15C
18B
17A
17A
20B
18A
18A
HOT
COLD
ON
20A
20A

ENGLISHENGLISH
ENGLISH
21
24
22
23
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price
Pfi ster Consumer Service.
3.
Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative fi nishes, use only a soft damp
cloth to clean and shine. Use of polish, detergents, abrasive
cleaners, organic solvents or acid may cause damage.
Use of
other than a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar
substance are not acceptable for public areas or Commercial
use. Installation of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfi ster.com
• Installation Support
• Care and Warranty Information
MAINTENANCE AND CARE
21 FLUSHING & AERATOR CLEANING
After installation is complete, remove Aerator Housing (
21A
). Turn Valve
(
21B
) on and allow both hot and cold water to run for at least one minute each.
While water is running, check for leaks. To clean the aerator, disassemble Aerator
Housing (
21A
) by separating the Aerator Shell (
21C
), Basket (
21D
), and Washer
(
21E
). Once parts have been cleaned, reassemble by reversing steps.
21E). Once parts have been cleaned, reassemble by reversing steps.21E
22 HANDLE REMOVAL
Carefully pry off Handle Button (
22A
) using a small screwdriver or blade. Using
a
3
Carefully pry off Handle Button (
3
Carefully pry off Handle Button (
/
32
” Allen wrench, loosen Set Screw (
22B
) and remove Handle (
22C
).
23 CARTRIDGE REPLACEMENT
Turn off water supplies and relieve pressure before working on your faucet. Remove
handle (see fi gure 22). Remove the Dome Cap (
23A
) by unscrewing counterclockwise.
Using pliers, unscrew the retainer ring (
23B
). Carefully remove the Cartridge (
23C
)
by pulling it straight up and out. Reassemble valve by reversing steps.
24 HOSE REMOVAL
T
o remove hose attachments from Diverter Tee (24F), push on
To remove hose attachments from Diverter Tee (24F), push on T
C
onnection
Fittings (
24A
&
24A & 24A
24B
)
. Holding Plastic Collet (
24C
) in place, pull out on
C
onnection
Fittings (
24A
&
24B
)
until Hoses (
24D & 24E
) are free.
24D & 24E) are free.24D & 24E
6
24C
21C
22A
22A
23A
23A
21B
21D
21E
21A
21A
22B
22C
23B
23C
24C
24A
24A
24B
24D
24E
24F
24F

19701 DaVinci
Lake Forest, CA 92610
Phone: 1-800-Pfaucet
www.pricepfi ster.com
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
A COMPANY
26 Series
Serie 26
Série 26
*
*
Letter Designates FinishLetter Designates Finish
La Letra Indica el Terminado
La Letra Indica el Terminado
La Lettre Designe La FiniLa Lettre Designe La Fini
A
Polished Chrome
Cromo Pulido
Chrome Poli
S
Stainless Steel
Acero Inoxidable
Acier Inoxydable
971-130
941-036*
940-121*
950-099
950-200
931-600
950-111
951-027
950-004
951-026*
931-002
920-053*
974-035
950-006
941-005
941-081*
920-054*
962-001
960-023*
961-004*
951-023*
951-039
950-590
950-590
931-900
941-137*
920-055*