BLACK DECKER BD22MWSA User manual
INSTRUCTION MANUAL
PORTABLE DEHUMIDIFIER
Thank you for choosing BLACK+DECKER!
PLEASE READ BEFORE RETURNING THIS PRODUCT FOR
ANY REASON.
If you have a question or experience a problem with your BLACK+DECKER
purchase, go to www.blackanddecker.com/instantanswers
If you can’t find the answer or do not have access to the Internet, call
844-299-0879 from 10:30 a.m. to 6:30 p.m. EST Mon. - Fri. to speak with an
agent. Please have the catalog number available when you call.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
CATALOG NUMBER
BD22MWSA
BD30MWSA
BD50MWSA
BD50PMWSA
Page 2
Thank you for purchasing our
BLACK+DECKER product. This
easy-to-use manual will guide you
in getting the best use of your
portable dehumidier.
Remember to record the model
and serial numbers. They are on a
label on the rear.
Staple your receipt to your manual.
You will need it to obtain warranty service.
Model number
Serial number
Date of purchase
PRODUCT REGISTRATION
CONTENTS
SAFETY INFORMATION
Important Safety Instructions..........................................................................................................................................3-4
Grounding Instructions.........................................................................................................................................................4
Safety Guidelines ....................................................................................................................................................4
Power Cord Operation......................................................................................................................................4-5
SET UP & USE
Parts & Features ...................................................................................................................................................................6-7
Control Panel............................................................................................................................................................ 8
Operation Instructions.................................................................................................................................... 9-13
CLEANING & CARE............................................................................................................................................. 14
TROUBLE SHOOTING & WARRANTY
Before You Call For Service...............................................................................................................................15
Customer Service...................................................................................................................................................15
Troubleshooting ...............................................................................................................................................16-17
Limited Warranty....................................................................................................................................................................18
Page 3
SAFETY INFORMATION
IMPORTANT SAFETY INSTRUCTIONS
1. To reduce risk of injury, read this guide before using the appliance.
2. Always place the unit on a level surface strong enough to support
the unit with a full bucket of water.
3. Never use or store gasoline or other ammable vapor or liquid near
this unit.
4. Minimum installation clearance: 11.8 inches around the unit and 17.7
inches above the unit. Do not block or cover air inlet or outlet grills.
5. The unit must be connected to a correctly grounded power supply.
6. Do not start or stop the unit by inserting or pulling out the power
plug.
7. Do not use the unit in the immediate surroundings of a bath, a
shower, swimming pool or clothes dryer.
8. Do not insert anything into the air outlet.
9. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similar qualied person in order to
avoid a hazard.
10. When cleaning the unit, always turn the unit off and unplug the
power cord.
11. Do not use outdoors. Intended for indoor use only.
12. Place the dehumidier in an area where the temperature will not fall
below 41˚ Fahrenheit. The coils can become covered with frost if the
room temperature is too low, which may reduce performance.
13. The appliance shall be installed in accordance with national wiring
regulations.
14. The appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning the use of the appliance by a person
responsible for their safety.
SAVE THESE INSTRUCTIONS
HOUSEHOLD USE ONLY
WARNING
WARNING - Hazards or unsafe
practices which COULD result in
severe personal injury or death
DANGER
DANGER - Immediate hazards
which WILL result in severe
personal injury or death
CAUTION
CAUTION - Hazards or unsafe
practices which COULD result in
minor personal injury
WARNING
When using electrical appliances, basic safety precautions
should be followed, including the following
Page 4
SAFETY INFORMATION
GROUNDING INSTRUCTIONS
ELECTRICAL REQUIREMENTS
In the event of malfunction or breakdown, grounding provides a path of
least resistance for electric current to reduce the risk of electric shock.
The appliance must be connected to a cord having an equipment-
grounding conductor and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
DANGER - Improper connection of the equipment grounding conductor
can result in a risk of electric shock. The conductor with insulation
having an outer surface that is green with or without yellow stripes is
the equipment grounding conductor. If repair or replacement of the
cord or plug is necessary, do not connect the equipment-grounding
conductor to a live terminal. Check with a qualied electrician or service
person if the grounding instructions are not completely understood, or
if in doubt as to whether the appliance is properly grounded. Do not
modify the plug connected to the appliance – if it will not t the outlet,
have a proper outlet installed by a qualied electrician.
FOR GROUNDED, CORD-CONNECTED
APPLIANCE RATED LESS THAN 15A AND
INTENDED FOR USE ON A NOMINAL 120V
SUPPLY CIRCUIT
The appliance is for use on a nominal 120V circuit
and should be connected to a grounding outlet
that looks like the one illustrated below. The use
of a temporary adaptor is not recommended.
POWER SUPPLY CORD
1. Extreme care must be exercised with the use of an extension cord:
a) Use only a grounding type 3-wire extension cord that has a 3-blade
grounding plug and a 3-slot receptacle that will accept the plug on the
appliance.
b) The marked electrical rating of the cord set or extension cord must equal
to or greater than the electrical rating of the appliance. The longer cord
should be arranged so that it will not drape over the counter top or table
top where it can be pulled on by children or tripped over unintentionally.
NOTE: Neither BLACK+DECKER nor the dealer can accept any liability for damage to the
product or personal injury resulting from failure to observe the electrical connection
procedures.
Page 5
SAFETY INFORMATION
USE OF EXTENSION CORDS WITH
DEHUMIDIFIER
Only use a grounded extension cord that is rated at least 7.8 amps
and has a third-wire ground. When a long extension cord is used to
connect the dehumidier, a voltage drop occurs. The longer the cord,
the greater the voltage drop. This results in less voltage being supplied
to the dehumidier and increases the amount of current (amp) draw
or reduces performance. A heavier cord with a larger wire size will
reduce the voltage drop. Be sure to choose a cord that will supply
enough voltage to operate the dehumidier. The table below indicates
appropriate gauge for extension cords.
WARNING: Keep electrical cords in good condition. Do not use worn, bare, or
frayed cords because they can cause electrical shock.
WARNING: Operating equipment at low voltage can cause it to overheat. Using
an excessively long extension cord can cause the cord to overheat.
Minimum Gauge for Cord Sets
Ampere Rating
Volts Total Length of Cord in Feet (meters)
120V 25 (7.6) 50 (15.2) 100 (30.5) 150 (45.7)
240V 50 (15.2) 100 (30.5) 200 (61.0) 300 (91.4)
More than Not more
than AWG
0 6 18 16 16 14
610 18 16 14 12
10 12 16 16 14 12
12 16 14 12 Not Recommended
Page 6
PARTS & FEATURES
SET UP & USE
FOR MODELS:
BD50MWSA BD50PMWSA
MODELS:
BD22MWSA BD30MWSA
Control Panel
Air Outlet Grille
Air Filter
Continuous Drain
Hose Outlet
Power Cord and Plug
Casters
Casters
Power Cord Buckle
(placed in the water bucket)
Front Panel
Water Bucket
1 Pump Drain Hose
(BD50PMWSA Only)
Drain Hose
Drain Hose
Adapter
Adapter
Water Level
Window
Recessed
Door Handle
(both sides)
Pump Drain Hose Outlet
(BD50PMWSA only)
Control Panel
Air Outlet Grille
Air Filter
Continuous Drain
Hose Outlet
Power Cord and Plug
Power Cord Buckle
(placed in the water bucket)
Front Panel
Water Bucket
Water Level
Window
Recessed
Door Handle
(both sides)
Page 7
POSITIONING THE UNIT
Casters
(At four points on the bottom of unit)
• Casters can move freely.
• Do not force casters to move over
the carpet.
• Do not move the unit with water in
the bucket. The unit may tip over and
water may spill.
• Do not use outdoors.
• This dehumidier is intended for
indoor residential applications only.
This dehumidier should not be
used for commercial or industrial
applications.
• Place the dehumidier on a smooth,
level oor strong enough to support
the unit with a full bucket of water.
• Allow at least 8 in. of air space on
all sides of the unit for good air
circulation (at least 16 in. of air space
on air outlet).
• Place the unit in an area where
the temperature will not fall below
41˚F(5˚C). The coils can become
covered with frost at temperatures
below 41˚F(5˚C), which may reduce
performance.
• Place the unit away from the clothes
dryer, heater or radiator.
• Use the unit to prevent moisture
damage anywhere books or
valuables are stored.
• The dehumidier must be operated
in an enclosed area to be most
effective. Close all doors, windows
and other outside openings to the
room.
WHEN USING THE UNIT
• When rst using the dehumidier,
operate the unit continuously for 24
hours. Make sure the plastic cover
on the continuous drain hose outlet
is installed properly so there are no
leaks.
• This unit is designed to operate
with a working environment
between 41˚F/5˚C and 90˚F/32˚C,
and between 35% to 85% relative
humidity.
• If the unit has been switched off and
needs to be switched on again, allow
approximately three minutes for the
correct operation to resume.
• Do not connect the dehumidier to
a multiple socket outlet, which is
also being used for other electrical
appliances.
• Select a suitable location, making
sure you have easy access to an
electrical outlet into an electrical
socket.
• Plug the unit into an electrical socket
outlet.
• Make sure the water bucket is
correctly tted otherwise the unit will
not operate properly.
NOTE: When the water in the bucket
reaches a certain level, please
be careful when moving the
machine to avoid it falling and
spilling.
SET UP & USE
16 inches. or more
16 inches. or more
8 inches. or more
8 inches. or more
8 inches. or more
Page 8
CONTROL PANEL
SET UP & USE
Auto defrost
LED Indicator
Pump
Button
(Model
BD50PMWSA only)
Filter
Button
Turbo
Button
Power
Button
Decrease
Room
Humidity Level
Comfort
Button
Continuous
Button
Timer
Button
Increase Room
Humidity Level
Bucket Full
LED Indicator
Timer OFF
LED Indicator
Digital
Humidistat
Display
Timer ON
LED Indicator
Error Codes and Protection Code:
• AS-Humidity sensor error--Unplug the unit and plug it back in. If error repeats,
call for service.
• ES-Tube Temperature sensor of the evaporator error--Unplug the unit and plug
it back in. If error repeats, call for service.
• P2-Bucket is full or bucket is not in right position--Empty the bucket and
replace it in the right position.(only available for the unit with no pump feature.)
• Eb-Bucket is removed or not in right position-- Replace the bucket in the right
position.(only available for the unit with pump feature.)
NOTE: When one of the above malfunctions occurs, turn off the unit, and check
for any obstructions. Restart the unit, if the malfunction is still present,
turn off the unit and unplug the power cord. Contact the manufacturer or
its service agents or a similar qualied person for service.
SET UP & USE
Page 9
FILTER
The check lter feature is a reminder
to clean the Air Filter for more efcient
operation. The Filter indicator light will
illuminate after 250 hours of operation.
Clean the lter with warm, soapy water
and dry thoroughly before putting
back in place. Once lter is back in the
unit, press the FILTER button to reset
the lter indicator.
CAUTION: Do not operate the
dehumidier without the
included lter in place.
Unit should be turned off
and unplugged to change
lter.
TURBO BUTTON
Control the fan speed. Press to select
either High or Low fan speed. Set
the fan control to High for maximum
moisture removal. When the humidity
has been reduced and quiet operation
is preferred, set the fan control to Low.
CONTINUE BUTTON
Press to activate the continuous
dehumidifying operation. This function
will keep the unit operating without
having to empty the bucket. For this
function, the drain hose will need to be
attached to the back of the unit.
TIMER BUTTON
Press to initiate the Auto start and
Auto stop feature, in conjunction with
the and buttons.
INCREASE/DECREASE BUTTONS
Humidity Set Control buttons
The humidity level can be set within a
range of 35% RH (Relative Humidity)
to 85%RH (Relative Humidity) in 5%
increments. For drier air, press the
button and set to a lower percent
value (%). For damper air, press the
button and set a higher percent value
(%).
Timer Set Control buttons
Use the Up/Down buttons to set the
Auto start and Auto stop time from
0.0 to 24.
POWER BUTTON
Press to turn the dehumidier on and
off.
COMFORT BUTTON
Press to start/stop the comfort
dehumidifying operation. This function
will automatically adjust the humidity
level based on the temperature of the
room. The humidity level cannot be
adjusted in this setting, it will stabilize
between 45%-55%. Press the comfort
button or the humidity adjust buttons
to cancel this feature.
PUMP BUTTON (only
BD50PMWSA)
Press to activate the pump operation.
NOTE: Make sure the pump drain
hose is installed into the unit
before the pump operation is
activated. When the bucket is
full,the pump starts to work.
Refer to the next pages for
removing the collected water.
Do not use this operation
when the outdoor temperature
is equal to or less than 32˚F
(0˚C).
DISPLAY
Shows the set % humidity level from
35% to 85% or auto start/stop time
(0~24) while setting, then shows
the actual (±5% accuracy) room %
humidity level in a range of 30% RH
(Relative Humidity) to 90%RH.
Page 10
SET UP & USE
OTHER FEATURES
Bucket Full Light
When the water collection bucket is
full, the unit will shut off automatically,
make a beeping noise and the
BUCKET FULL indicator will light. The
dehumidier will not run again until the
bucket is emptied and properly placed
back inside the unit.
Auto Defrost
When frost builds up on the
evaporator coils, the compressor will
cycle off and the fan will continue to
run until the frost disappears.
Auto Shut Off
The dehumidier shuts off when the
bucket is full, or when the bucket is
removed or not replaced in the proper
position. The fan motor will continue
to run for 30 seconds.
Wait 3 minutes before resuming
operation. This is to protect the unit.
Operation will automatically start after
3 minutes.
Auto-Restart
If the unit turns off unexpectedly
due to a power outage, it will restart
with the previous function setting
automatically when the power
resumes.
Setting the Timer
To program the unit to automatically
turn ON, press the TIMER button
when the unit is OFF. Press the < or
> to increase the timer in 30 minute
increments up to 10 hours, After 10
hours, each increase will run in 1 hour
increments up to 24 hours. Once the
desired time is reached, the unit will
automatically turn ON.
To program the unit to automatically
turn OFF, press the TIMER button
when the unit is ON. Each press of the
< or > buttons will change the timer
setting in 30 minute increments up to
10 hours. After 10 hours, each press
will increase or decrease the timer in 1
hour increments up to 24 hours. Once
the desired time is over, the unit will
automatically power OFF.
When the Auto Start & Auto Stop
times are set, within the same program
sequence, Timer On Off indicator lights
illuminate identifying both On and Off
times are now programmed.
Turning the unit On or Off at any
time or adjusting the timer setting to
0.0 will cancel the Auto Start/Stop
function.
When LED display window displays
the code of P2, the Auto Start/Stop
function will also be cancelled.
Page 11
SET UP & USE
REMOVING THE COLLECTED
WATER
There are three ways to remove
collected water.
1. Use the bucket
• When the unit is off, if the bucket is
full, the Full indicator light will light.
• When the unit is on, if the bucket is
full, the compressor and the fan turn
off, and the Full indicator light will
light, the digital display shows P2.
• Slowly pull out the bucket. Grip
the left and right handles securely,
and carefully pull out straight so
water does not spill. Do not put the
bucket on the oor because the
bottom of the bucket is uneven.
Otherwise the bucket will fall and
cause the water to spill.
• Throw away the water and replace
the bucket. The bucket must be in
right place and securely seated for
the dehumidier to operate.
• The machine will re-start when the
bucket is restored in its correct
position.
a. Pull out the bucket a little.
b. Hold both sides of the bucket with
even strength, and pull it out from
the unit.
c. Pour the water out.
NOTE:
• When you remove the bucket, do not
touch any parts inside of the unit.
Doing so may damage the product.
• Be sure to push the bucket gently all
the way into the unit. Banging the
bucket against anything or failing to
push it in securely may cause the unit
not to operate.
• If the pump hose drops when you
remove the bucket, you must reinstall
the pump hose properly to the unit
before replacing the bucket into the
unit.
• When you remove the bucket, if
there is some water in the unit you
must dry it.
• When the unit is on, if the bucket is
removed, the compressor and the
fan turn off, then the unit will beep 8
times and the digital display shows
Eb.
• When the unit is off, if the bucket is
removed, the unit will beep 8 times
and the digital display shows Eb.
Pump hose drops Reinstall pump
hose properly
Page 12
SET UP & USE
2. Continuous draining
• Water can be automatically emptied into a oor drain by attaching the unit
with a drain hose (included).
• Remove the plastic cover from the
back drain outlet of the unit and set
aside, then insert the drain hose
through the drain outlet of the
unit and lead the drain hose to
the oor drain or a suitable
drainage facility.
• When you remove the plastic cover, if there is some water in the back drain
outlet of the unit you must dry it. Make sure the hose is secure so there are no
leaks and the end of the hose is level or down to let the water ow smoothly.
• Direct the hose toward the drain, making sure that there are no kinks that will
stop the water owing. Make sure the water hose is lower than the drain hose
outlet of the unit.
• Select the desired humidity setting and fan speed on the unit for continuous
draining to start.
NOTE: When the continuous draining feature is not being used, remove the drain
hose from the outlet, and dry the water in the continuous drain hose
outlet.
3. Pump draining (model BD50PMWSA)
• Water can be automatically emptied into a oor
drain or a suitable drainage facility by attaching
the pump drain outlet with a pump drain hose.
• Remove the continuous drain hose from the unit
and install the plastic cover to the continuous
drain hose outlet of the unit by clockwise rotation.
• Reset the pump drain hose into the pump drain
hose outlet for depth of 15mm at least, then lead
the water hose to the oor drain or a suitable drainage facility.
• Press the pump pad of the unit to activated the pump operation. When the
bucket is full the pump starts to work.
NOTE: The pump may make a loud noise when it starts to work for 3~5 minutes.
It is a normal phenomenon.
• Make sure the hose is secure so there are no leaks.
• Direct the hose toward the drain, making sure that there are no kinks that will
stop the water owing.
• Place the end of the hose into the drain and make sure the end of the hose is
level or down to let the water ow smoothly.
• Select the desired humidity setting and fan speed on the unit for pump draining
to start.
Remove the plastic
cover by counter-
clockwise rotation.
Drain
hose
Page 13
SET UP & USE
NOTE: The pump operation light blinks every second when the
pump is failing to operate. Please turn off the unit and plug
the power cord out. Check the following things:
• Cleaning the lter of the pump. Remove the bucket from the unit,
take down the pump and clean the lter of the pump.
• Empty the water of the bucket.
• Reinstall the pump hose if it drops and reinstall the bucket
properly. Turn on the unit.
NOTE: Do not use this operation when the outdoor temperature is equal to or
less than 32˚F (0˚C), otherwise the water will freeze and will cause the
water hose to be blocked and the unit will fail to operate. Make sure to
empty the bucket once a week when using the pump draining feature.
When the pump draining feature is not being used, remove the pump
drain hose from the outlet.
• Press the pump drain hose outlet in and take the pump drain hose out from it.
Make sure to not let the water in the pump hose drip to the oor.
Take the pump drain
hose out
Press the pump drain
hose outlet in
Page 14
CARE & CLEANING
CARE AND MAINTENANCE
Care and cleaning of the dehumidier.
CAUTION - Turn the dehumidier off and remove the plug from the wall outlet
before cleaning.
CLEAN THE GRILLE AND CASE
• Use water and a mild detergent. Do not use bleach or abrasives.
• Do not splash water directly onto the main unit. Doing so may cause an electrical
shock, cause the insulation to deteriorate, or cause the unit to rust.
• The air intake and outlet grilles get soiled easily, so use a vacuum attachment or
brush to clean.
CLEAN THE BUCKET
• Every few weeks, clean the bucket to prevent growth of mold, mildew and bacteria.
Partially ll the bucket with clean water and add a little mild detergent. Swish it
around in the bucket, empty and rinse.
NOTE: Do not use a dishwasher to clean the bucket. After clean, the bucket must be
in place and securely seated for the dehumidier to operate.
CLEAN THE AIR FILTER
• Remove the lter every two weeks based on normal operating conditions.
• To remove the lter, pull lter outwards.
• Wash the lter with clean water then dry.
• Re-install the lter, replace Bucket.
CAUTION: DO NOT operate the dehumidier without a lter because dirt and lint
will clog it and reduce performance.
Unit should be turned off and unplugged to clean lter.
WHEN NOT USING THE UNIT FOR LONG TIME PERIODS
• After turning off the unit, wait one day before emptying the bucket.
• Clean the main unit, water bucket and air lter.
• Wrap the cord with the power cord buckle.
• Cover the unit with a plastic bag.
• Store the unit upright in a dry, well-ventilated place.
Page 15
TROUBLESHOOTING & WARRANTY
BEFORE YOU CALL FOR SERVICE
IF THE APPLIANCE FAILS TO OPERATE:
A) Check to make sure that the heater/fan is plugged in securely. If it is not,
remove the plug from the outlet, wait 10 seconds and plug it in again securely.
B) Check for a blown circuit fuse or a tripped main circuit breaker. If these seem
to be operating properly, test the outlet with another appliance.
IF NONE OF THE ABOVE SOLVES THE PROBLEM, CONTACT A QUALIFIED
TECHNICIAN. DO NOT TRY TO ADJUST OR REPAIR THE APPLIANCE
YOURSELF.
IMPORTANT
DO NOT RETURN THIS PRODUCT TO THE STORE
If you have a problem with this product, please contact the
BLACK+DECKER Customer Satisfaction Center at
844-299-0879 or service@equitybrands.com
DATED PROOF OF PURCHASE, MODEL # AND SERIAL #
REQUIRED FOR WARRANTY SERVICE
Page 16
TROUBLESHOOTING & WARRANTY
Troubleshoot your problem by using the chart below. If the dehumidier still does
not work properly, contact W Appliance Co. customer service center or the nearest
authorized service center. Customers must never troubleshoot internal components.
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
Dehumidier
does not start
The dehumidier is unplugged Make sure the dehumidier’s plug is pushed
completely into the outlet
The fuse is blown/circuit breaker
is tripped
Check the house fuse/circuit breaker box and
replace fuse or reset breaker
Dehumidier has reached its
present level or the bucket is full
The dehumidier automatically turns off when
either condition occurs. Change to a lower setting
or empty the water bucket and replace properly
Bucket is not in the proper position The bucket must be in place and securely seated
for the dehumidier to operate
Power failure There is a protective time delay (up to 3 min.)
to prevent tripping of the compressor overload.
For this reason, the unit may not start normal
dehumidication for 3 minutes after it is powered
back on
Dehumidier
does not dry the
air as it should
Not enough time allowed for unit
to remove moisture
When rst installed, allow at least 24 hours to
maintain the desired dryness
Airow is restricted Make sure there are no curtains, blinds, or furniture
blocking the front or back of the dehumidier
Dirty lter See the FILTER CLEANING section
The humidity control may not be
set low enough
For drier air, press the button to lower the
percent humidity desired in the room
Doors and windows may not be
closed tightly
Check that all doors, windows and other openings
are securely closed
Clothes dryer may be blowing
moist air into the room
Install the dehumidier away from the dryer. The
dryer should be vented outside.
Room temperature is too low Moisture removal is best at higher room
temperatures. Lower room temperatures will
reduce the moisture removal rate. This model is
designed to operate at temperatures above 41˚F
Dehumidier runs
too much
The area is too large for the
capability of the dehumidier
The capacity of your dehumidier may not be
adequate for the room size
Doors and windows are open Close all doors and windows to the outside
Frost appears on
the coils
The dehumidier has recently
been turned on or the room
temperature is below 41˚F
This is normal. Frost will usually disappear within
60 minutes. For details, see “AUTO DEFROST”
section
Controls cannot
be set
The compressor will turn off
and the fan will automatically
continue to run for approximately
3 minutes at a xed setting
This is normal. Wait approximately 3 minutes and
set the fan speed at the desired level
Fan noise Air is moving through the unit This is normal
Water on the
oor
Hose connection may be loose Check the hose connection. See the CONTINUOUS
DRAINAGE SECTION
Hose is attached but not draining
into a drain
Disconnect the hose if using the bucket or place
the hose near a drain
Page 17
TROUBLESHOOTING & WARRANTY
Troubleshoot your problem by using the chart below. If the dehumidier still does
not work properly, contact W Appliance Co. customer service center or the nearest
authorized service center. Customers must never troubleshoot internal components.
TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY
Error Code “E1” The temperature sensor on the
discharge pipe may be faulty and
may need to be changed.
Contact the customer service center.
Error Code “E2” Heat exchanger may be faulty and
may need to be changed.
Contact the customer service center.
Error Code “E3” The room temperature may be
too high.
Check to make sure the room temperature is
below 90˚F. If the room temperature is too high,
place the dehumidier in a location where the
room temperature is below 90˚F for at least 2
hours before operating again.
Error Code “EH” The humidity sensor may be faulty
and may need to be changed
Contact the customer service center.
Error Code “P1”
(Model
BD50PMWSA)
Bucket is not in the proper position. Make sure the bucket is in place and securely
seated for the dehumidier to operate. If error
code reappears after adjusting the bucket, please
contact the customer service department.
Error Code “E5”
(Model
BD50PMWSA)
Didn't install the pump drainage kit
before start pump function.
Install the pump drainage kit before start pump
function.
Users use non-standard drainage
pipes. (Manufacturers' original
pipe)
Use the original pipe.
The drain cover is not tightened. Tighten the cover.
The rubber washer is missing. Re-install the washer in cover.
Poor connection between drain
pipe and drain cover.
Check the connection of pipe and drain cover.
Page 18
TROUBLESHOOTING & WARRANTY
LIMITED WARRANTY
Any repair, replacement, or warranty service,
and all questions about this product should be
directed to BLACK+DECKER at 844-299-0879
from the USA or Puerto Rico.
BLACK+DECKER warrants to the original purchaser
that the product will be free from defects in material,
parts and workmanship for the period designated for
this product. The warranty commences the day the
product is purchased and covers up to a period of 1
year (12 months) for labor/1 year (12 months) for parts
(manufacturing defects only).
BLACK+DECKER agrees that it will, at its option,
replace the defective product with either a new
or remanufactured unit equivalent to your original
purchase during the warranty period.
Exclusions: This warranty does not apply to the
below:
1. If the appearance or exterior of
the product has been damaged or
defaced, altered or modified in design or
construction.
2. If the product original serial number
has been altered or removed or cannot
be readily determined.
3. If there is damaged due to power line
surge, user damage to the AC power
cord or connection to improper voltage
source.
4. If damage is due to general misuse,
accidents or acts of God.
5. If repair attempts are done by
unauthorized service agents, use of
parts other than genuine parts or parts
obtained from persons other than
authorized service companies.
6. On units that have been transferred
from the original owner.
7. On products that have been purchased
as refurbished, like new, second-hand, in
a “As-Is” or “Final Sale” terms.
8. To products used in a commercial or
rental setting.
9. To products used in settings other than
ordinary household use or used other
than in accordance with the provided
instructions.
10. To damages for service calls for
improper installations.
11. Transportation and shipping costs
associated with the replacement of the
unit.
12. Service calls to instruct you how to use
your product.
13. Service calls to repair or replace the
house fuse, reset the circuit breaker or
correct the wiring in the house.
REPAIR OR REPLACEMENT AS PROVIDED UNDER
THIS WARRANTY IS THE EXCLUSIVE REMEDY OF
THE CUSTOMER; BLACK+DECKER. SHALL NOT BE
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT, EXCEPT
TO THE EXTENT PROHIBITED BY APPLICABLE LAW.
ANY IMPLIED WARRANTY OF MERCHANTABILITY
OF FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED TO THE DURATION OF THE
WARRANTY.
Some states do not allow the exclusion or limitations
of incidental or consequential damages, or limitations
on how long the warranty lasts. In these cases the
above exclusions or limitations may not apply to you.
This warranty gives you specific legal rights and you
may also have other rights which vary from state to
state.
Obtaining Service: To obtain service, product
literature, supplies or accessories please call
844-299-0879 to create a ticket for exchange/repair.
Please make sure to provide the date of purchase,
model number and a brief description of the problem.
Our customer service representative
will contact you or send detailed return instructions.
BLACK+DECKER does not warrant that the appliance will work
properly in all environmental conditions, and makes no warranty
and representation, either implied or expressed, with respect
to the quality, performance, merchantability, or fitness for a
particular purpose other than the purpose identified within this
user’s manual. BLACK+DECKER has made every eort to ensure
that this user’s manual is accurate and disclaims liability for any
inaccuracies or omissions that may have occurred. Information in
this user’s manual is subject to change without notice and does
not represent a commitment on the part of BLACK+DECKER.
BLACK+DECKER reserves the right to make improvements to
this user’s manual and/or to the products described in this user’s
manual at any time without notice. If you find information in this
manual that is incorrect, misleading, or incomplete, please contact
us at 844-299-0879.
W Appliance Co.
1356 Broadway
New York, NY 10018
Page 19
Page 20
BLACK & DECKER, BLACK+DECKER, the BLACK & DECKER and
BLACK+DECKER logos and product names and the orange and black color
scheme are trademarks of The Black & Decker Corporation, used under license.
All rights reserved.
Product in this box may differ slightly from that pictured. Does not affect
function. Not all accessories shown in photography are included in this
package.
Imported by W Appliance, Inc., 1356 Broadway, New York, NY 10018
March 2021 Printed in China
This manual suits for next models
3
Table of contents
Languages:
Other BLACK DECKER Dehumidifier manuals
