Black Orchid Hydro-Box Installation guide

240cm x 120cm x 200cm
Assembly Instruction Manual
for

Tent Fabric
Splash tray fabric
Frame joints
Box Contents
A
B
120cm
120cm
Pole
Pole
C
D
100cm
100cm
Pole
Pole
E
F
120cm
120cm
Pole
Pole
X 13 X6
X 6
X 6
X 2
X 2

1
STEP
Tent Assembly Instructions
Please follow the instructions carefully
4 corner joints,
2 T joints, 4 A poles,
2 B poles

2
STEP
Tent Assembly Instructions
Push the poles into the corner joints
until the locking ball pops back out
into the hole

3
STEP
Tent Assembly Instructions
With the base joined together, next make the top of the frame with
the other A and B poles

4
STEP
Tent Assembly Instructions
Add poles C to the bottom and D to the top.

5
STEP
Tent Assembly Instructions
Join together the
base of the frame
with the top of the
frame.
Then add poles
E and F to the top
as seen in Step 6

6
STEP
Tent Assembly Instructions
Add poles E and F to the top of the frame

7
STEP
Tent Assembly Instructions
Unfold your tent and place the frame into the base

8
STEP
Tent Assembly Instructions
Make sure the bottom of tent is fitted
firmly around the frame before lifting
the top of the tent onto the frame

9
STEP
Tent Assembly Instructions
Lift the top of the tent fabric up and carefully
fit it around the top of the frame
Next zip up the top and
bottom zips all the way
around sealing the tent
up.
Start from the back of the
tent with the top zip then
use the bottom zip to
complete the back,
continue the same with
the sides and finish with
the front where both zips
will meet up.

10
STEP
Tent Assembly Instructions
Add the splash tray in the bottom once complete