Laserworld 25K User manual

Scanner Set 25K
USER MANUAL
Please read this manual carefully before you install the scanners!

USER MANUAL: Laserworld Scanner Set 25K
Date: 01/2008
page
2
o
4
Table of contents
Checking Parts...........................................................................................2
Technical data:..........................................................................................2
Connectors:................................................................................................3
Checkin Parts
Please make sure the ollowing parts are included:
2 x Galvos
2 x mounted mirrors
1 x X/Y-Galvo-mount
1 x power supply (PSU)
1 x dual driver
25 cm galvo cables
1 x User manual
Technical data
-scanspeed: 25Kpps @ 4-5°
- mirror size: 5 x 10 mm
- optical scan an le: max. 40°
- power supply: +/-18V
- dielectric mirrors
- dual channel driverboard
- optical eedback system or high accuracy
- scan angle per axis is individual adjust
- overcurrent protection
- Application to maximally 40°C ambient temperature

USER MANUAL: Laserworld Scanner Set 25K
Date: 01/2008
page
3
o
4
Connectors
Not used
Y
Gnd
X
To PSU
To scanners

USER MANUAL: Laserworld Scanner Set 25K
Date: 01/2008
page
4
o
4
EU- Declaration of Conformity
We hereby con irm that the ollowing device
Laserworld Scanner Set 25K
complies with the essential sa ety requirements, laid down in the regulations o the
committee to assimilate the provisions o law o all participating EU states on the
electromagnetic compatibility (98/336/EWG).
The device has been classi ied considering the ollowing EU-norms on
electromagnetic compatibility:
DIN EN 55103-1: 1996
DIN EN 55103-2: 1996
DIN EN 61000-3-2:2000 + A2: 2005
DIN EN 61000-3-3:1995 + A1: 2001
Assessment o compliance o the product with the requirements relating to the Low Voltage
Directive (LVD) was based on the ollowing standards:
DIN EN 60065 : 2002
Furthermore, the device is veri ied in correspondence to the laser class regulations DIN EN
60825-1, i properly set up according to the upper mentioned laser sa ety regulation.
A ter installing the device, an inspection and o icial approval is indispensable or the overall
setup. The inspection must ollow the european guidelines EN 60825-1 and corresponding
regulations or the prevention o accidents BGV-B2.
This declaration is executed on behal o the Scanner Set 25K manu acturer.
Laserworld (Switzerland) AG
Kreuzlingerstrasse 5
8574 Lengwil
SWITZERLAND
Authorized person:
Supervisory board Mr Martin Werner
place o business: 8574 Lengwil / SWITZERLAND
company number: CH-440.3.020.548-6
Commercial Registry Kanton Thurgau
www.laserworld.com
in [e-mail]
representative according to EMVG:
Cleantech Europe GmbH
Managing Director: Thomas Schulze
Fürkho str. 5
81927 München / DE