LiteGear Auroris X System User manual

AURORIS X SYSTEM PAGE 1
WELCOME KIT
™

Overview
Quick-Start Guide
Auroris
LiteDimmer Spectrum AC600
Set-Up
Folding Instructions
Accessories
4
5-6
7-8
9-10
11-12
13-14
Auroris X System
WELCOME KIT

AURORIS X SYSTEM PAGE 4
Overview
Welcome to the Auroris X Lighting System. Over the following pages, you’ll fi nd basic
instructions on getting started and folding and unfolding your Auroris, as well as
information on recommended accessories. For more detailed instructions and information,
please scan the appropriate QR codes placed throughout the kit.
WHAT’S INCLUDED WITH YOUR SYSTEM:
LiteDimmer
Spectrum AC600
PowerCon Cables
Edison, Schuko,
or Bare Ends
Auroris X
28-Pin Cables
x2
x2
x1
x2
PowerCon Cables

AURORIS X SYSTEM AURORIS X SYSTEMPAGE 5 PAGE 6
24 Large Format LED Pixels Orientation Tag1.
612
511
410
39
28
17
12 6
Pixel Numbering Pixel Numbering
FRONT BACK
11 5
10 4
93
82
71
612
511
410
39
28
17
12 6
11 5
10 4
93
82
71
2.
Auroris X
QUICK-START GUIDE
The Auroris is a full-color overhead light source that
combines high-quality color rendition and precision
control in one sleek, easy-to-use package. Powered
by LiteGear’s Spectrum technology, Auroris is built
with 24 large format pixels, creating a pixel-mappable
source that can cover a 100-square-foot area from a
single fi xture. Designed to be lightweight and easy to
rig, Auroris is one of the slimmest, most versatile soft
lights ever invented.
Support D-Rings
Fastening Strap With Buckles
Light Engine Cover
Connector Leads
Connector Storage
3.
4.
5.
6.
7.
3 4 5
Input Current: 1.04A per module (contains 24 modules)
Input Voltage: 48VDC
LE Wattage: 50W Nominal per module (contains 24 modules)
Total Power: 1,200W Nominal (1,450W Maximum)
Weight: 114 lbs (51.8 kg)
Dimensions: Height: 10 ft (3 m), Width: 10 ft (3 m), Depth: 1 in (25.4 mm)
Color Temperature Range: 2,000K to 11,000K
Tint Control: Full plus and minus green adjustment
Certifi cations: ETL, CE, UKCA, FCC
SCAN BEFORE USE OR GO TO
LITEGEAR.COM/INFO_AURX
AURORIS SPECIFICATIONS
76

AURORIS X SYSTEM AURORIS X SYSTEMPAGE 7 PAGE 8
LiteDimmer Spectrum AC600
QUICK-START GUIDE
The LiteDimmer Spectrum AC600 is a new class of
dimmers made specifi cally with Auroris in mind. Complete
with local control and new communication protocols, this
dimmer can control 12 large format pixels, making pixel
mapping large overhead areas easier than ever.
Specially designed with advanced processing power,
integrated Ethernet switch, expanded memory, and a
faster processor, this new hardware allows for Ethernet-
based communication protocols such as Art-Net and
sACN, advanced color control, and cutting-edge software
features. An integrated USB-A port enables easy updates
that will bring new, innovative software for years to come.
1
26
47
8
11 12 13
5
3
9
10 17
16
15
14
OLED Display
Left Encoder
Right Encoder
Power LED Indicator
Data LED Indicator
Function Buttons
3-Position Rocker Switch
USB-A Port
Wireless Antenna
Cooling Fan
EtherCon Ports
PDX Connector
DMX In Connector
DMX Through Connector
28-Pin Connector
Power Switch
PowerCon Connectors
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
FRONT PANEL:
BACK PANEL:
2
1
K-Mount Plate Fuse Access Port1. 2.
SCAN BEFORE USE OR GO TO
LITEGEAR.COM/INFO_LDSAC600
TOP BOTTOM
LITEDIMMER SPECTRUM AC600 SPECIFICATIONS
Input Voltage: 100-240VAC, 50/60 Hz
Input Current: 4.5A to 9A
Output Voltage: 48VDC
Output Current: 14.7A to 21A
Weight: 12.6 lbs (5.7 kg)
Dimensions: Height: 5.8 in(147.3 mm) Width: 7.2 in(182.9 mm) Length: 15.7 in(388.8 mm)
Power: 700W Maximum
Certifi cations: ETL, CE, UKCA, FCC

AURORIS X SYSTEM AURORIS X SYSTEMPAGE 9 PAGE 1 0
Set-Up
To secure Auroris to ladder truss,
loop strap around truss and
connect buckles with a click.
Ensure the buckle is fully inserted
with both prongs locked in place.
To tighten, pull strap horizontal
using normal force.
Do not pull with an upwards
angle or with excessive force.
STEP 1
STEP 2
Securing Auroris to Ladder Truss
Arrow on cable must be oriented
to the top when connecting
28-pin cable to dimmer.
Insert the cable connector into
dimmer, rotate the locking ring
clockwise 1/4 turn.
STEP 1
STEP 2
Connecting 28-Pin Cable to Dimmer
WARNING
INCORRECT ORIENTATION
MAY CAUSE DAMAGE TO PINS
Note: Auroris and Dimmer not to scale
LOOP
CLICK
PULL
CLICK
PULL
LOOP

AURORIS X SYSTEM AURORIS X SYSTEMPAGE 11 PAGE 12
Folding Instructions
Begin by laying your Auroris fl at, LED side
down, on a clean surface. It is recommended
to use the included ground tarp.
With two people on opposite sides (tag
and cable sides), in one motion, lift and fold
the outer rows, one row at a time, over the
center rows of the Auroris.
Lift up along the center crease to form an
“A” shape. Use the center D-ring to assist
in lifting.
STEP 1 STEP 2 STEP 3
LIFT
LIFT
Let the section lay fl at. At this point, the
folded Auroris should be one row wide with
the white sections on the inside and black
on outside.
Lift the inner crease points of the two outer
panels upward. Walk the sides inward until
all panels are touching.
Lay the folded Auroris fl at. Your Auroris is
ready to be stored in the storage bag.
STEP 4 STEP 5 STEP 6
LIFT
FOLD IN

AURORIS X SYSTEM AURORIS X SYSTEMPAGE 13 PAGE 14
Accessories
AURORIS TRUSS SYSTEM DIFFUSION AND SIDE SKIRTS TEASERS
Designed for Auroris, this lightweight truss
system makes rigging quick and easy.
When paired with diffusion skirts, this frame
is the perfect structure for creating a low-
profi le light box with soft and even light.
Perfect for creating soft, even light output,
this diffusion and side skirt combo is
available in three densities: full, half, and
quarter. The skirt attaches quickly to the
truss system and controls unwanted
bounce or spill.
These duvetyn teasers extend the side
skirt and allow for additional control of
unwanted spill light. Attached Velcro strips
allow for the height of the teasers to be
quickly adjusted.
RIGGING LIGHT CONTROL LIGHT CONTROL
DIMMER TRUSS & STAND MOUNTS AURORIS CABLES BAGS & CASES
The Truss Mount provides secure
attachment to any 1.5-2 inch pipe. The
Dimmer Stand Mount provides secure
attachment to any light stand. The K-mount
enables quick and secure attachment to
the LiteDimmer Spectrum AC600.
Distribute data with the 28-pin extension
cable. Provide power with the mains cable
or the passthrough cable.
The Road Case can hold the complete
Auroris X System and is designed to be easily
transportable while offering a high level of
protection for the Auroris system.
The Storage Bag protects the Auroris X,
from dirt and wear and tear between uses.
MOUNTS CONNECTORS TRAVEL

For warranty information on your Auroris, see the comprehensive user
guide which can be scanned via QR code throughout this book.
TM