Black Shark Lucifer T10 User manual
- 01 -
Thank you for purchasing the BLACK SHARK Lucifer T10 Wireless
Earbuds. Please read this manual carefully and keep it for future
reference. If you need any assistance, please contact our support
team with your product model number and Amazon order number.
PACKAGE CONTENTS
BLACK SHARK Lucifer T10
Touch Control
LED Indicators
Ultra-clear
Microphone
- 02 -
CHARGING CASE
3 PAIRS OF EAR TIPS (S, M, L)
CHARGING CABLE
USER MANUAL & WARRANTY CARD
Battery Indicators
USB-C Charging Port
- 03 -
SPECIFICATIONS
Model BS-T10
Bluetooth Version Bluetooth 5.1 Dual Mode
Transmission Distance ≤ 10 m
Driver Size 10 mm x 2
Frequency Response 20 Hz -20 kHz
Battery Capacity 40 mAh x 2 (earbuds), 400 mAh (charging case)
Charging Time 1.5 h
Play Time (varies by volume
level and content) 4 h (A total of 16 h with the charging case)
Charging Type USB-C
Casing Material ABS, PC
Cable Material PVC
Cable Length 0.3m
Compatibility Devices with Bluetooth audio capability
Supported Codecs SBC, AAC
- 04 -
GETTING STARTED
CHARGING YOUR BLACK SHARK LUCIFER T10
For first-time use, connect the charging case (containing the earbuds) to a USB
port via the charging cable and wait until your Lucifer T10 is fully charged. For
subsequent use, the charging case and earbuds can be charged independently.
BATTERY INDICATOR FOR THE CHARGING CASE WHEN PLUGGED IN
Status
Battery 0%-15%
Battery 16%-50%
Battery 51%-100%
Static Flash Static
- 05 -
BATTERY INDICATOR FOR THE CHARGING CASE WHEN UNPLUGGED
BATTERY INDICATORS FOR THE CHARGING CASE WHEN CHARGING EARBUDS
Each time opened/closed, battery indicators light to display the status of the
charging case for 5 seconds, then switch to the earbuds’ charging process.
Status
Battery 0%-99%
Fully Charged
Earbuds’ Charging Indicator Status
Battery 0%-99%
Right Side Fully
Charged
Flash
Flash
Static
Dark
- 06 -
PAIRING TO A MOBILE DEVICE
When connecting your Lucifer T10, remember to keep it within a meter (1m)
of your mobile device.
1. Simply open the case to enter pairing mode.
• You will hear 2 beep sounds while the earbuds are powered on and enter pairing
mode. The indicators on the earbuds will remain white for 2 seconds.
• You will hear 4 beep sounds, and the master earbud’s indicator will then flash
green and white alternatively while the indicator light on the other flashes white
every 4 seconds.
The first earbud to boot is the master earbud.
2. Enable Bluetooth on your mobile device and select “Black Shark Lucifer T10”
from the list of device found.
3. Wait for pairing to complete.
• You will hear 4 beep sounds when the earbuds have successfully paired and
connected to your device.
• If the earbuds fail to connect to your audio source, the earbuds will stay in search
mode for up to 3 minutes before powering off. If this happens, simply repeat
the steps again to pair.
Once the earbuds have been paired, they will automatically try to connect to
the paired mobile device each time the charging case is opened or the earbuds
are powered on.
USING DIFFERENT SIZES OF EARTIPS
To improve the wearing experience, please select an ear tip that provides the
best, most secure fit.
- 07 -
GAMING MODE
On the right earbud, triple tap to activate gaming mode. Once enabled, your
earbuds will function at a low latency, giving you real-time audio feedback while
gaming. Repeat the same gesture to disable gaming mode and activate music
mode.
POWER ON/OFF
To power off the device, simply return the earbuds to the charging case and close
the case. The same can be done by holding both touch controls for 5 seconds.
The earbuds will power back up when you open the case or hold both touch
controls for 3 seconds.
USING THE LEFT/RIGHT EARBUD ONLY
Simply take the left/right earbud out only and connect it to your device.
RESET YOUR LUCIFER T10
Starting with the earbuds in the case:
1. Remove the earbuds from the charging case, and the earbuds will turn on. Hold
both touch controls for 5 seconds to turn them off.
2. Hold both touch controls for 10 seconds. The earbuds will turn on, clear their
pairing list, and turn off again.
3. Place both earbuds back in the charging case and close the case to reset.
4. Open the case again, then pick up the earbuds and double tap both touch
controls. Your Lucifer T10 will turn on and enter pairing mode.
- 08 -
FUNCTION ACTION INDICATOR AUDIO PROMPT
Power On
Open the case Static white for 2
seconds 2 beep sounds
Hold both touch
controls for 3 seconds
Power Off
Place the earbuds
back in the case and
close it Static green for 2
seconds 2 beep sounds
Hold both touch
controls for 5 seconds
Pairing Open the case
The master
earbud’s
indicator will
flash green
and white
alternatively, and
the other will
flash white every
4 seconds
4 beep sounds
Connected Open the case Flash white every
4 seconds 4 beep sounds
TOUCH CONTROLS FOR EARBUDS
- 09 -
Standby None Flash white every
4 seconds None
Disconnect Disconnect via the
connected device Same as ‘paring’
2 beep sounds,
then 4 beep
sounds
Voice
Assistant
Triple tap the left
touch control None None
Answer/End
a call
Double tap the L/R
touch control
Flashes white
rapidly upon an
incoming call
None
Reject a Call Hold the L/R touch
control for 2 seconds None None
Play/Pause Double tap the L/R
touch control None None
Previous
Track
Hold the left touch
control for 2 seconds None None
Next Track Hold the right touch
control for 2 seconds None None
- 10 -
Volume Up Single tap the right
touch control None None
Volume
Down
Single tap the left
touch control None None
Gaming
Mode
Triple tap the right
touch control
Green
“breathing”
lighting effect
“Game Mode”
Music Mode Triple tap the right
touch control
White
“breathing”
lighting effect
“Music Mode”
Turn On/
Off the
Indicators
Quadruple tap the L/R
touch control
Indicators on
or off 2 beep sounds
Battery Low None None 2 beep sounds
every 60 seconds
Clear Pairing
List
Hold both touch
controls for 10
seconds when the
earbuds are powered
off
Static green for 2
seconds None
- 11 -
Avoid Hearing Damage
Using the earbuds at a high volume for a long time may cause permanent
hearing loss. To reduce this risk, keep the volume at a safe and comfortable level.
Traffic Security
To reduce the risk of accidents, always fully pay attention while driving. Using a
device while driving, even with a hands free kit, distracts you and can cause an
accident. Follow local driving laws and regulations while using this device.
Interference with Medical Equipment
This device may cause medical equipment to malfunction. Therefore, follow
all rules and regulation of hospitals and health care facilities. Do not use your
device in prohibited areas. Some wireless devices may affect the performance
of hearing aids and peacemakers. Consult your service provider for more
information. Peacemaker manufacturers advise keeping a minimum distance of 15
cm between a mobile device and peacemaker to prevent potential interference.
It is recommended to hold the device opposite the peacemaker, and not to carry
the device in your front pocket.
Battery
This product contains a lithium-ion battery. WARNING! There is a risk of explosion
if the battery is replaced by an incorrect type. Do not attempt to remove, open,
SAFETY INFORMATION
- 12 -
crush, puncture, short circuit, dispose of in fire or water, or expose battery to
temperatures higher than 40°C. Dispose of used batteries according to local
regulations.
Battery Replacement
Your devices battery is built-in and non-removable. The battery can be replaced
only by an authorized service partner, whose contact information can be found
on the Warranty card.
The operating temperature of the device is -15 to 55°C. Avoid environments
that are dusty, damp, dirty, or have magnetic fields. Keep the device away from
extended-period direct sunlight, extreme heat/cold, fire, microwave, or high-
pressure containers. Such environments may damage your device or accessories.
Correctly dispose of this product. This icon indicates that this product should
not be disposed with other household wastes throughout the EU. To prevent
the environment or human health from being damaged due to uncontrolled
waste disposal, recycle responsibly to promote the sustainable reuse of material
resources.To safely recycle your device, use return and collection systems or
contact the retailer from whom you purchase the device.
- 13 -
For questions, support, or warranty claims, please contact us through one of the
region-specific email addresses given below. Please include your Amazon order
number and product model number.
For more information, please check on global.blackshark.com
Join Black Shark at global.blackshark.com
Like us on Facebook at facebook.com/BlackSharkGlobal
Follow us on Twitter at twitter.com/blckshrk_global
Manufacturer: Blackshark Technologies (Nanchang) Co., Ltd.
Registered Address: Room 815-1, 8th floor, Block A, Huajiang Building, NO.1
Tsinghua Science Park, NO.299, Yupingdong Street, Nanchang Economic and
Technological Development Zone, Nanchang City, Jiangxi Province, 330013, CN
FCC ID: 2A2JO-BST1
IC: 27499-BST10
WARRANTY &CUSTOMER SUPPORT
Table of contents
Other Black Shark Headphones manuals
