Black Shark LUCIFER T2 User manual

BLACK SHARK LUCIFER T2
USER MANUAL

13
26
39
52
66
14
27
40
53

- 01 -
BLACK SHARK Lucifer T2
Thank you for purchasing the BLACK SHARK Lucifer T2 Gaming Wireless
Earbuds. Please read this manual carefully and keep it for future
reference. If you need any assistance, please contact our support team
with your product model number and Amazon order number.
Touch Control
LED Indicators
Ultra-clear
Microphone

CHARGING CASE
3 PAIRS OF EAR TIPS
CHARGING CABLE
USER MANUAL & WARRANTY CARD
Battery Indicators
USB-C Charging Port
- 02 -

Model
Bluetooth Version
Transmission Distance
Driver Size
Frequency Response
Battery Capacity
Charging Time
Play Time (varies by volume
level and content)
Charging Type
Casing Material
Cable Material
Cable Length
Compatibility
Supported Codecs
BS-T2
Bluetooth 5.2 Dual Mode
≤ 10m
10 mm x 2
20 Hz -20 kHz
40 mAh x 2 (earbuds), 400 mAh
(charging case)
2 h
5 h (A total of 20 h with the
charging case)
USB-C
ABS, PC
PVC
0.3m
Devices with Bluetooth audio
capability
SBC, AAC
- 03 -

BATTERY INDICATOR FOR THE CHARGING CASE WHEN PLUGGED IN
CHARGING YOUR BLACK SHARK LUCIFER T2
Battery 0%-30%
Status
Static
Battery 31%-70%
Battery 71%-99%
Fully Charged
- 04 -
Flash Dark
For first-time use, connect the charging case (containing the earbuds)
to a USB port via the charging cable and wait until your Lucifer T2 is
fully charged. For subsequent use, the charging case and earbuds
can be charged independently.

BATTERY INDICATORS FOR THE CHARGING CASE WHEN CHARGING
EARBUDS
Battery indicators flash cyclically when the charging case is charging
earbuds.
When connecting your Lucifer T2, remember to keep it within a meter (1
m) of your mobile device.
1. Simply open the case to enter pairing mode.
You will hear 4 beep sounds while the earbuds are in pairing mode. The
indicators on the earbuds will remain white for 2 seconds. The master
earbud’s indicator will then flash green and white alternatingly while the
indicator light on the other flashes white every 4 seconds.
BATTERY INDICATOR FOR THE CHARGING CASE WHEN UNPLUGGED
PAIRING TO A MOBILE DEVICE
- 05 -
Battery 0%-10%
Status
Battery 11%-30%
Battery 31%-70%
Battery 71%-100%

2. Enable Bluetooth on your mobile device and select “Black Shark
Lucifer T2” from the list of device found.
3. Wait for pairing to complete. You will hear 4 beep sounds when the
earbuds have successfully paired and connected to your device.
If the earbuds fail to connect to your audio source, the earbuds will stay
in search mode for up to 3 minutes before powering off. If this happens,
simply repeat the steps again to pair.
Once the earbuds have been paired, they will automatically try to
connect to the paired mobile device each time the charging case is
opened or the earbuds are powered on.
On the right earbud, triple tap to activate gaming mode. Once enabled,
your earbuds will function at a low latency, giving you real-time audio
feedback while gaming. Repeat the same gesture to disable gaming
mode and activate music mode.
GAMING MODE
To improve the wearing experience, please select an ear tip that provides
the best, most secure fit.
POWER ON/OFF
To power off the device, simply return the earbuds to the charging case
and close the case. The same can be done by holding both touch controls
for 5 seconds. The earbuds will power back up when you open the case
or hold both touch controls for 3 seconds.
USING DIFFERENT SIZES OF EARTIPS
- 06 -

TOUCH CONTROLS FOR EARBUDS
Simply take the left/right earbud out only and connect it to your device.
USING THE LEFT/RIGHT EARBUD ONLY
Starting with the earbuds in the case:
1. Remove the earbuds from the charging case, and the earbuds will turn
on. Hold both touch controls for 5 seconds to turn them off.
2. Hold both touch controls for 10 seconds. The earbuds will turn on,
clear their pairing list, and turn off again.
3. Place both earbuds back in the charging case and close the case to
reset.
4. Open the case again, your Lucifer T2 will turn on and enter pairing
mode.
RESET YOUR LUCIFER T2
FUNCTION
Power On
Open the case
Static white for
2 seconds 2 beep sounds
Hold both touch
controls for 3
seconds
ACTION INDICATOR AUDIO PROMPT
- 07 -

Place the
earbuds back in
the case and
close it Static green for
2 seconds
The master
earbud’s
indicator will
flash green and
white
alternatingly,
and the other
will flash white
every 4 seconds
2 beep sounds
Hold both touch
controls for 5
seconds
Open the case
None None
4 beep sounds
4 beep sounds
Power Off
Pairing
Connected
None
Triple tap the left
touch control None
Flash white
every 4 seconds
None
None
Disconnect via
the connected
device
2 beep sounds,
then 4 beep
sounds
None
Standby
Disconnect
Voice Assistant
- 08 -

Double tap the
L/R touch
control
Flashes white
rapidly upon an
incoming call
None
None
Hold the L/R
touch control for
2 seconds
None
Answer/End a
call
Reject a Call
None
Double tap the
L/R touch
control
None
Play/Pause
None
Hold the left
touch control for
2 seconds
None
Previous Track
None
Hold the right
touch control for
2 seconds
None
Next Track
None
Control the
volume via the
connected
device
None
Volume
Up/Down
Green
“breathing”
lighting effect
Triple tap the
right touch
control
3 beep sounds
Gaming Mode
- 09 -

Triple tap the
right touch
control
White
“breathing”
lighting effect 2 beep sounds
Music Mode
Quadruple tap
the L/R touch
control
Indicators on or
off 1 beep sound
Turn On/Off
the Indicators
Hold both touch
controls for 10
seconds when
the earbuds are
powered off
None None
Clear Pairing
List
None None 2 beep sounds
every 60 seconds
Battery Low
- 10 -

Using the earbuds at a high volume for a long time may cause
permanent hearing loss. To reduce this risk, keep the volume at a safe
and comfortable level.
Traffic Security
To reduce the risk of accidents, always fully pay attention while driving.
Using a device while driving, even with a hands free kit, distracts you and
can cause an accident. Follow local driving laws and regulations while
using this device.
Interference with Medical Equipment
This device may cause medical equipment to malfunction. Therefore,
follow all rules and regulation of hospitals and health care facilities. Do
not use your device in prohibited areas. Some wireless devices may affect
the performance of hearing aids and peacemakers. Consult your service
provider for more information. Peacemaker manufacturers advise
keeping a minimum distance of 15 cm between a mobile device and
peacemaker to prevent potential interference. It is recommended to hold
the device opposite the peacemaker, and not to carry the device in your
front pocket.
Avoid Hearing Damage
SAFETY INFORMATION
- 11 -

Battery
This product contains a lithium-ion battery. WARNING! There is a risk of
explosion if the battery is replaced by an incorrect type. Do not attempt
to remove, open, crush, puncture, short circuit, dispose of in fire or water,
or expose battery to temperatures higher than 40℃. Dispose of used
batteries according to local regulations.
Battery Replacement
Your devices battery is built-in and non-removable. The battery can be
replaced only by an authorized service partner, whose contact
information can be found on the Warranty card.
The operating temperature of the device is -15 to 55℃. Avoid
environments that are dusty, damp, dirty, or have magnetic fields. Keep
the device away from extended-period direct sunlight, extreme
heat/cold, fire, microwave, or high-pressure containers. Such
environments may damage your device or accessories.
- 12 -

- 13 -
Amazon US orders: [email protected]
Amazon EU orders: [email protected]
Amazon CA orders: [email protected]
Amazon JP orders: [email protected]
IC: 27499-BST2

- 14 -
BLACK SHARK Lucifer T2
Touch-Steuerung
LED-Anzeigen
Ultraklares Mikrofon
Vielen Dank, dass Sie sich für die BLACK SHARK Lucifer T2 Gaming
Wireless Earbuds entschieden haben. Bitte lesen Sie dieses Handbuch
sorgfältig durch und bewahren Sie es für eine spätere Verwendung auf.
Wenn Sie Hilfe benötigen, wenden Sie sich bitte mit Ihrer Produktmodell-
nummer und der Amazon-Bestellnummer an unser Support-Team.
VERPACKUNGSINHALT

LADECASE
3 PAAR OHREINSÄTZE
LADEKABEL
BENUTZERHANDBUCH & GARANTIEKARTE
Akku-Anzeigen
USB-C-Ladeanschluss
- 15 -

SPEZIFIKATIONEN
Modell
Bluetooth-Version
Übertragungsdistanz
Treibergröße
Frequenzgang
Akkukapazität
Ladedauer
Wiedergabezeit (variiert je
nach Lautstärkepegel und Inhalt)
Ladetyp
Gehäusematerial
Kabelmaterial
Kabellänge
Kompatibilität
Unterstützte Codecs
BS-T2
Bluetooth 5.2 Dual Mode
≤ 10m
10 mm x 2
20 Hz -20 kHz
40 mAh x 2 (Ohreinsätze), 400 mAh
(Ladecase)
2 h
5 h (Insgesamt 20 h mit dem Ladecase)
USB-C
ABS, PC
PVC
0,3 m
Geräte mit Bluetooth-Audiofunktion
SBC, AAC
- 16 -

ERSTE SCHRITTE
BATTERIEANZEIGE FÜR DAS LADECASE, WENN ES ANGESCHLOSSEN IST
AUFLADEN IHRES BLACK SHARK LUCIFER T2
Akku 0% – 30%
Status
Leuchtend
Akku 31% – 70%
Akku 71% – 99%
Vollständig geladen
- 17 -
Blinkend Dunkel
Schließen Sie bei der ersten Verwendung das Ladecase (mit den
Kopfhörern) über das Ladekabel an einen USB-Anschluss an und
warten Sie, bis Ihr Lucifer T2 vollständig geladen ist. Bei späterer
Verwendung können das Ladecase und die Kopfhörer unabhängig
voneinander aufgeladen werden.

1. Öffnen Sie einfach das Case, um den Pairing-Modus zu aktivieren.
Der erste Kopfhörer, der gestartet wird, ist der Master-Kopfhörer.
AKKUANZEIGE FÜR DAS LADECASE, WENN DIESES NICHT
ANGESCHLOSSEN IST
KOPPLUNG MIT EINEM MOBILEN GERÄT
- 18 -
Akku 0% – 10%
Status
Akku 11% – 30%
Akku 31% – 70%
Akku 71% – 100%
AKKUANZEIGEN FÜR DAS LADECASE BEIM AUFLADEN DER
KOPFHÖRER
Die Akkuanzeige blinkt regelmäßig, wenn das Ladecase die
Kopfhörer auflädt.
Sie hören 4 Pieptöne, während sich die Kopfhörer im Kopplungsmo-
dus befinden. Die Anzeigen auf den Kopfhörern bleiben 2 Sekunden
lang weiß. Die Anzeige des Master-Kopfhörers blinkt dann abwechsel-
nd grün und weiß, während die Anzeigeleuchte des anderen
Kopfhörers alle 4 Sekunden weiß blinkt.
Wenn Sie Ihren Lucifer T2 anschließen, achten Sie darauf, dass er
nicht weiter als einen Meter (1 m) von Ihrem Mobilgerät entfernt ist.