BlackVue CPL Filter BF-1 Instruction manual
Items
Circular Polarizing Lens Filter
Compatible Models
DR750S Series, DR750X Series
DR900S Series, DR900X Series
CPL Filter BF-1
Installation
1.
2.
3.
Make sure there is no dust on the
camera’s lens or on either side of
the CPL Filter. Clean up the surface
with a microber cloth if needed.
Fit the CPL Filter on the dashcam’s
lens as shown. Make sure the hole
on the lter’s mount lines up with
the Security LED of the dashcam.
Install on the front camera of a
compatible BlackVue dashcam.
4. Rotate the CPL Filter’s ring to
adjust the polarization intensity.
We recommend adjusting the lter
in bright daylight and using Live
View on the BlackVue App to check
the result in real time.
Remark:
Like most polarizing lters, the
BlackVue CPL Filter is designed for
use in daylight. Therefore, we
advise to remove the lter at night
to preserve video brightness.
Lens Structure
Lens Lens
Natural
light
Light source
Light reection
Anti-scratch
Hard coating
Anti-scratch
Hard coating
UV CoatingTAC
(Triacetate
Cellulose)
TAC
(Triacetate
Cellulose)
Polarized
Filter
(30%)
www.blackvue.com
Made in Korea
COPYRIGHT©2020 Pittasoft Co., Ltd. All rights reserved.
