Blanco BLANCOPRECISION 513-695 User manual

SINK SPECIFICATIONS
BLANCO STEELART
BLANCOPRECISION™ 10 DOUBLE BOWL With 15" Drainboard
Model 513-695
FEATURED MODEL
513-695 10" and 10" bowl depths
ADDITIONAL MODELS
513-689 Double Bowl without Drainboard
FEATURES
• 18 gauge, 304 series stainless steel
• 18/10 chrome/nickel content
• Handcrafted from a single panel of stainless steel
• 10mm radius corners
• Elegant and functional drain grooves
• Long-lasting, easy-to-clean, satin polish finish
• Sound-deadening insulation
• Rear drain placement
CODE/STANDARDS COMPLIANCE
ASME 112.19.3-00
IAPMO/UPC listed
OPTIONAL ACCESSORIES
Sink Grids: 221-015, 221-024
Colanders: 218-772, 215-651
Cutting Board: 218-620
WARRANTY
Blanco America’s BLANCOPRECISION™ 10 sinks
feature a LIMITED LIFETIME WARRANTY to be free of
all manufacturing defects under normal use. See our
complete warranty for details.
While Blanco America endeavors to provide accurate
information, all dimensions are nominal, cannot be
guaranteed, and are subject to change or cancellation.
Blanco America assumes no responsibility for use of
superseded or voided specifications.
© 2008 BLANCO AMERICA
06/08 SPEC-003
MODEL 513-695
BLANCO AMERICA
800.451.5782
www.blancoamerica.com
PRODUCT SPECIFICATION
Undermount sink to be 52" in length and 20"
in front-to-back depth. Sink to be handcrafted
from a single panel of 18 gauge, 304 series
stainless steel, with 18/10 chrome/nickel
content and satin polished finish. Sink to
feature 10mm radius corners, rear drain
placement and integral drainboard. Sink to be
Blanco Model 513-695, with left bowl depth of
10" and right bowl depth of 10".
JOB INFORMATION
Job Name:
Contact:
Date Specified:
Specifier:
Contractor:
NOMINAL DIMENSIONS
BOWL DEPTH DRAIN
MODEL OVERALL LEFT RIGHT DIAMETER
513-695 52 x 20 10 10 3-1/2
DXF cutout templates available on our web site.