Blaupunkt LIVERPOOL 110 Assembly instructions

Operating and installation instruction
CAR RADIO
LIVERPOOL 110

2
1. PWR(power)/MUTE
2. (release button)
3. SEL/VOL
4. DISC slot
5. LCD
6. TA
7. AF/T-MENU
8. (eject button)
9. USB interface
10. AUX IN
11. 0/DISP
12. PTY
13. 6#/ DIR+
14. 5*/DIR-
15. 4/RDM
16. 3/RPT
17. 2/INT
18. 1/PAU
19. BAND/LOUD
20. AMS/
21. 7/MODE/
22. EQ
23. 8/
24. 9/
25. Reset button
26. SD interface

CONTENTS
Operation
...................................................
4
Switching on/off the unit
............................
4
Faceplate release
.........................................
4
Sound adjustment
.......................................
4
Loudness
......................................................
4
Auxiliary input
.............................................
4
Display information
.....................................
4
Liquid crystal display
...................................
5
ESP function
................................................
5
Reset function
.............................................
5
Radio operation
...........................................
5
Switching to radio mode
.........................
5
Selecting the frequency band
................
5
Selecting station
......................................
5
Automatic memory storing& program
scanning
..................................................
5
Station storing
.........................................
6
RDS (radio data system) operation
.........
6
CD operation
...............................................
7
Switching to CD mode
............................
7
Selecting tracks
.......................................
7
Pausing playing
.......................................
7
Previewing all tracks
................................
7
Repeating the same track
.......................
7
Playing all tracks in random
....................
7
Ejecting a disc
..........................................
7
USB play operation
......................................
7
SD operation
................................................
8
BLUETOOTH OPERATION …………………... 8
Disc notes
...................................................
12
Remote Control
..........................................
13
Specification
..............................................
14
Trouble shooting
.......................................
15
Installation
.................................................
16
3

OPERATION
SWITCHING ON/OFF THE UNIT
Press any button(except button) to turn
on the unit. When the unit is on, press and
hold
PWR button (1) to turn the unit off.
FACEPLATE RELEASE
Press release button (2) to detach the
removable faceplate.
SOUND ADJUSTMENT
Press VOL button (3) shortly to select the
desired adjustment mode. The adjustment
mode will change in the following order:
BAS-TRE-BAL-FAD-BEEP-TAVOL-LOC-STEREO-
EON-VOL
BAS: bass
TRE: treble
BAL: balance
FAD: fader
BEEP: Beep sound
TA VOL: TA volume
LOC: local
EON :Enhance other Network
VOL: volume
By rotating the audio knob (3), it is possible to
adjust the desired sound quality or setting.
BEEP on/off: Thecaraudiodeviceis
equipped with 2 beep tone modes.
Rotate
the volume knob to choose one.
-Beeponmode: The confirmation beep
sound is
heard whenever abuttonis
pressed.
- Beep off mode: The confirmation beep is
switched off whenever a key is pressed.
LOUDNESS
Press and hold the BAND button (19) to turn
on/off the LOUD function.
EQUALIZATION
Press EQ button(22)toturnonequalization
function and to select desired
audio mode. There are several kinds of mode
as below:
→
FLAT
→
POP
→
ROCK
→
CLASS
→
EQ OFF
TA-VOLUME:
This function allows you to define the
minimum volume for the traffic
announcements. The adjustable range is
20~43. The defaulted value
is 25.
Rotating the volume knob to adjust the
volume of the traffic.
LOCAL function
In this item rotating the audio knob (3) to turn
on/off local function.In LOCON mode the unit
will reduce the receiving sensitivity when you
search station. That means you can receive
the station that sound is good. It will ignores
the station that sound is not good. In LOC OFF
mode it will increase the receiving sensitivity
when you search the station. That means you
can receive more stations.
STEREO/MONO
In this item rotating the audio knob (3) to
choose STEREO or MONO mode. In STEREO
mode you can receive FM stereo signal. In
MONO mode the stereo station will be
switched to monochrome. Sometimes when
the signal is not good. If you change it to
MONO mode. The noise will be reduced.
AUXILIARY INPUT
The unit can be connected to a portable
audio player through the
AUX IN jack(10)
DISPLAY INFORMATION
Press DSP button (11) to operate as the
conversion of each display mode as follows:
- In case of receiving a RDS station
In radio mode:
->CT ->FREQ ->PTY -> PS
In CD (MP3/WMA) mode:
->CD (MP3/WMA) ->CT ->FREQ ->PTY
->PS
In case of PTY information, the display
shows as “NO PTY”.
4

OPERATION
- In case of receiving a non RDS station
In radio mode:
-> CT ->FREQ -> ‘NO PTY’ -> "NO PS"
In CD mode:
-> CD -> CT -> FREQ -> ‘NO PTY’ -> "NO PS"
Each displaying time is several seconds, and
come backto 1’st position after several
seconds.
Notes:
-CT=clocktime
- FREQ = frequency
SET THE TIME
(1) Manual setting:
Press and hold DSP button (11) for 2
seconds. The “HH” will flash. Press
button (23) or button (24) to change
the hour.Afterthat press
DSP button the“MM”
will flash. Press button or
button to change the minute. Then press and
hold
DSP button to confirm.
(2) Auto setting:
To receive a RDS station which has good
signal(The AF symbol of the LCD does not
flashing). Several minutes later the time will
be synchronized to the correct time by the
station’s signal.(Note: None RDS station does
not have this function.)
EON on/off
In SEL menu You can set the EON on/off.
Normally set the EON to on.
LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display .
ESP FUNCTION
The unit can be shockproof between ten
seconds and twenty seconds.
RESET FUNCTION
RESET
button (25) must be activated with
either a ballpoint pen or thin metal object.
The
RESET button is to be activated for the
following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not operate.
- Error symbol on the display.
Note: if press
RESET button (25), the unit
can’t workyet, please use a cotton swab
soaked in isopropyl alcohol to clean the
socket on the front panel.
RADIO OPERATION
 SWITCHING TO RADIO MODE
Press MODE button (21) to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
 SELECTING THE FREQUENCY BAND
At radio mode, press BAND button (19)
shortly to select the desired band.
The reception band will change in the
following order:
→
FM1
→
FM2
→
FM3
→
MW1
→
MW2
 SELECTING STATION
Press button(24)or button
(23) shortly to activate automatic seek
function. It will search up/down a station
automatically. Press for 2 seconds until
“
MANUAL ” appears on the display, the
manual tuning mode is selected. In this
mode you can turn up/down a step
frequency one by one till searched a
station. If both buttons have not been
pressed for 5 seconds, it will return to seek
tuning mode and “
AUTO ” appears on the
display.
 AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
-Press
AS/PS button (20) for 2 seconds,
the radio searches from the
5

OPERATION
87.5MHz frequency and checks the signal
strength until one cycle search is finished.
And then some strong stations are stored
into the corresponding preset number
button. In the first cycle it will in LOCAL
mode to receive the stronger station. If it is
less than 18 pcs station it will searching
stations in 2
nd
cycle in LOCAL OFF mode.
- Program scanning
Press
AMS button (20) shortly to scan
preset station. The radio is holding at
that preset number for several seconds
with release mute, then searches again.
 MANUALLY STORE STATION & RECALL
PRESET STATION
To received a station, Press one of the
preset button (1~6) for 2 seconds. The
current station is stored into the number
button. Shortly press the preset button
(1~6) to directly listen the station that
saved in the corresponding preset button.
RDS (RADIO DATA SYSTEM)
OPERATION
- Setting RDS mode
Press
AF button (7) to switch on or off AF
function.
Whenever AF is on, symbol “
AF ” appears
on the display.
Program name is displayed on receiving
aRDSstation.
“
AF ” starts blinking if the broadcasting
signal getting worse.
“
ALARM ”willbedisplayedwhenan
emergency broadcasting is received,
meanwhile sound output level will be
adjusted to the preset output level
automatically when the volume control is
set at minimum.
- Regional Program Operation
When AF function is on. Press and hold
AF button (7) for 2 seconds to switch on or
off region mode. When AF function is off.
Press and hold
AF button no function.
Some broadcasting stations change their
program from normal broadcasting to
regional broadcasting for a certain time
period. When region is on, the current
listening program remains unchanged.
When region is off, it allows the reception
moves to the regional station.
- Listening to Traffic Announcement
Press the
TA button to turn on/off TA
function.
When
TA mode is on and a traffic
announcement is transmitted:
When the unit was in CD (MP3) or AUX IN
mode, it will switch temporarily to radio
mode.
Temporary switch over to an EON linked
stationwhenEONdetectsatraffic
announcement on that other program.
If the volume level was under the
threshold point it will be raised to the
threshold point.
When
TA mode is on, TA of individual
segment is turned on. When a TP station is
received, TP of individual segment is
turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing
TA key. But the TA
mode will not be off. which EON TA
information was received from
current station and the radio switched to
that EON linked station, but no
Information could not be received
because the EON linked station is
located too far from that area. So the
radio is switched back to current station
again. In above operation, a customer
listens to a wrong program or mute sound
for a while.
6

OPERATION
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast station name data
expressed in alphanumerically
characters
AF: Alternative Frequencies
Frequency list of broadcasting stations
transmitting the same program
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or
not
EON: Enhanced Other Networks
Information
Broadcasting information on PI, AF, TP,
TA, etc, relating to networks other than
the networkused for current reception
PTY: Program Type Code
Contents of programs such as news,
light music, sports etc.
-Using
PTY to Select Program
PTY has a speech group and a music group.
Press PTY button (12) it will change as
below:
PTY SPEECH group--- PTY MUSIC group---
PTY off
In PTY SPEECH group you can select the
program type as below by using button 1~6.
After several seconds it will searching
automatically.
1# button: NEWS/AFFAIR/INFORM
2# button: EDUCATIO/DRAMA/SPORT
3# button: VARIED/CULTURE/SCIENCE
4# button: FINANCE/CHILD REN/WEATHER
5# button: PHONE IN/SOCIAL/RELIGION
6# button: TRAVEL/LEISURE/DOCUMENT
In PTY MUSIC group you can select the
program type as below by using button 1~6.
After several seconds it will searching
automatically.
1# button: ROCK M /POP M
2# button: LIGHT M/EASY M
3# button: OTHER M/CLASSICS
4# button: COUNTRY/JAZZ
5# button: OLDIES/NATION M
6# button: FOLK M
CD/MP3/WMA OPERATION
A. SWITCHING TO CD MODE
If there is no disc inserted in the driver:
Gently insert a disc with the printed side
uppermost into the disc compartment
until you feel some resistance. The disc is
drawn into the driver automatically. disc
playbackbegins.
If a CD is already inserted in the driver:
Keep pressing MODE button (21) shortly
until the CD mode display appears.
 SELECTING TRACKS
Press button (23) or button (24)to
move to the previous track/file or the
following track/file. Track/file number
shows on display.
Hold button (23) or button (24)
to fast reverse or fast forward. Disc play
starts from when you release the button.
 PAUSING PLAYING
Press PAU button(18)topauseplaying.
Press it again to resume play.
 PREVIEWING ALL TRACKS
Press INT button (17) to play first
several seconds of each track/file. Press
again to stop intro play and listen to
track/file.
7

OPERATION
 REPEATING THE SAME TRACK
Press RPT button (16) to continuously
repeat the same track/file. Press it again
to Repeat all the tracks/files.
 PLAYING ALL TRACKS IN RANDOM
Press RDM button (15) to play all tracks
/files in random order. Press it again to
cancel the random function.
 EJECTING A DISC
Press button (8) to stop disc playing
and eject the disc from the disc slot (4).
 SELECTING DIRECTORY UP/DOWN
Press DIR - button (14) or DIR + button (13)
to select directory downward or upward. If
the MP3 disc does not contain any
directory, there is no function of pressing
DIR - button(14)or DIR + button (13).
 SELECTING TRACKS BY AMS BUTTON
AMS
button (20) is assigned as selection
button in MP3/WMA operation.
When pressed, it is activated the selecting
each mode as below:
Search file number => Search File
Name=>Search from folder.

Search File number
Press AMS button for one time. It is
activated the “Search file number” mode.
Rotating knob (3) to select the file
number then press knob (3) to confirm.
T he unit searches the selected file to play.
You also can select the file number by
using the numeric buttons which shown
on the panel.
If the file number was selected. The unit
wait for knob (3) for seconds. The unit
searches the file after few seconds, even if
the knob (3) button is not pressed.

Search File N ame
Press AMS button for two times. It enters into
“Search File Name” mode. The unit searches
files that have the same character which is
inputted by the user pressing the
corresponding buttons listed on the Table 1
below.
KEY Assigned IN Searching mode (Table 1)
AS/PS Mode Select
SEL ENTER
M1 A, B, C, 1
M2 D, E, F, 2
M3 G, H, I, 3
M4 J, K, L, 4
M5 M, N, O, 5
M6 P, Q, R, 6
7/AF S, T, U, 7
8/TA/EQ V, W, X,
9/PTY Y, Z, SPACE, 9
0/DSP _,-,+,0
AUDIO KNOB (16) CHARACTER SELECT All
the CHARACTER above
Explain as follows:
- Use the corresponding buttons to select the
characters A to Z, blank, 0 to 9, _, -, +. (Of course
you can use knob (3) to select the characters
AtoZ,blank,0to9,_,-,+.)
- Press knob (3) to start the file search.
 Search From Folder
Press AMS button for three times. It enter
into “Searching from folder” mode.
Rotating the VOL knob (3) to select
desired folder. After that press knob (3)
to enter the folder. Rotating knob (3) to
select desired file. And then press knob
(3) again to play.
USB PLAY OPERATION
In the front panel of the unit, there is an USB
interface (9). You can connect an USB driver
through this interface (9).
When you connect an USB driver through the
interface, the unit will search the MP3/ WMA
files in the USB driver and start to play. If in
other mode, you can also press
MOD button
to select USB mode.
8

OPERATION
When playing the MP3/WMA files in the
device, the operation is the same with the
MP3 operation described above.
Note
：
 The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
 USB MP3 player is not a standard which
means different brand name or different
models have their own standard. So our
product cannot support every MP3
player.
 When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3 player
then connect it to the USB interface.
Otherwise, it may cause battery burst.
 When in USB play mode, be sure not to
remove the USB driver from the USB
interface.
SD OPERATION
There is a SD interface (26) on the front panel
of the unit.
When you insert a SD card in the SD interface,
the unit will search the MP3/WMA files in the
card and start to play.
The operation is the same with the MP3
operation described above. If in other mode.
You can also press
MOD button to select SD
mode.
When there are important files in the SD card,
do not connect it to the main unit to play.
SUPPORTED MP3/WMA DECODING MODES
The main unit supports MP3/WMA (Windows
Media Audio) decoding modes as below.
Standard Bit Rate (kbps) Supports
Mode
MPEG1 Audio
Layer 3
(44.1kHz)
32,48,64,96,
128,192,256,
320
Stereo
Windows
Media Audio
(44.1kHz)
64,96,128,192 Stereo
The USB solution can support:
1. Folder: 500 max.
2. File: 999 max.
3. Depth of folder: 8 layers
4. Size: 32 GB
CAUTION
When there are important files in the USB
device, do not connect it to the main unit to
play. And don’t play the CD-R/RW disc that
has important files in it. Because any wrong
operation may cause files loss. And our
company assumes no responsibility for this.
BLUETOOTH OPERATION
 PRE-PAIR FOR BLUETOOTH OPERATION
(i) When use Bluetooth, please make sure
the mobile phone supports Bluetooth
function.
(ii) For the different kind of mobile
phone, Bluetooth emissive power has
some difference. To get the best
conversation quality, it is commended
that the distance between the mobile
phone and the unit is within 3m. And
please don’t put any metal object or any
obstacle between the path of the mobile
phone and the unit.
9

OPERATION
 PAIRING
1) On the mobile phone, select the
Bluetooth set up. (Please refer to the
instruction manual of your mobile phone
on how to operate Bluetooth.)
2) “CAR KIT” should appear in the list on
your mobile phone, please select
“Car KIT”. and then input “0000” ,If it needs
a password.
3) When successful paired, the BT mark
will be displayed on LCD.
Note: The BT link incloud two links: phone
link and media link. You can check these
links in your mobile phone. Click the setting
of paired phone. You can see the “phone”
link and “media” link item as below. You
have to select them. If the “media”item was
not selected then the A2DP function will be
invalid.
 Answering/rejectinganincomingcall
When there is a phone is coming in.
Press key to answer the call. Press
key to reject the call.
 Hangupacall
When finished a conversation press
key to hang up this call.
 Checking phone book / received /
dialed / missed call (for Android and
Iphone mobile)
Press MODE key it will show “PHONE” on
the display. press
T-MENU button (7) for 2
seconds. it will show BOOK on the LCD.
Then shortly press
T-MENU button (7) it will
show items as below:
BOOK---RECEIVED---DIALED---MISSED---PH
ONE
In each item you can use
9/ button (24)
or
8/ button (23) to check
corresponding number. In the first time
your mobile will receive a message that
the unit will visit your mobile through
Bluetooth. You have to agree and press
“YES”to confirm.
(Note: It is necessary the phone number is in
the phone not in the SIM card).
 Call out
1) Making an outgoing call by
inputting the phone number
manually.
Press MODE key it will show “PHONE”
on the display. Short press key. The
LCD will become BLANK. Then you can
enter phone number and press SEL (3)
key to confirm the dialing. (Note: If you
inputted wrong numbers. You can press
and hold
T-MENU key to cancel wrong
numbers.)
In front panel except there are 0~9 digit.
please note */# as below:
*: press and hold 5 key for 2 seconds.
#: press and hold 6 key for 2 seconds.
10

OPERATION
2) Redialing an outgoing call
Press MODE key it will show “PHONE” on
the display. Double press key it will
redial the last phone number.
3) Making an outgoing call from the
phone book / received / dialed /
missed call (for Android and Iphone
mobile)
 Please reference page 15 “ Checking
phone book / received / dialed / missed
call”
item then select a phone number.
Press key to dial.
Note: If there are 2 pcs of SIM card in your
mobile phone. When you dial out a call
from the front panel of the unit. The call
will be dialed out from the default card.
 Transfer the call between mobile
phone and unit
During the talking mode, you can press
T-MENU button (7) to transfer the phone
call between the mobile phone and the
unit.
 Bluetoothaudio(A2DPfunction)
Press MODE key (21) it will show “PHONE”
onthedisplay.Thenturnonthemusic
player of your mobile phone and playing
a song. The sound will come out from the
speaker of the unit.
Press 1/PAU key of the front panel of the
unit to pause/play the song. Press
button (24) or button (23) to select
next/previous song.
11

1212OPERATION
DISC NOTES
A.
Notes on discs:
Attempting to use non-standard shape
discs (e.g. square, start, heart) may
1. damage the unit. Be sure to use round
shape CD discs only for this unit.
2. Do not stick paper or tape, etc, onto the
label side or the recording side of any
discs, as it may cause a malfunction.
3. Dirt, dust, scratches and warping discs
will cause misoperation.
B. Notes on CD-Rs (recordable
CDs)/CD-RWs (rewritable CDs):
1. Be sure to use discs with following
marks only for the unit to play:
2. The unit cannot play a CD-R and
CD-RW that is not finalized. (Please refer to
the manual of your CD-R/CD-RW recorder
or CD-R/CD-RW software for more
information on finalization process).
3. Depending on the recording status,
conditions of the disc and the
equipment used for the recording, some
CD-Rs/CD-RWs may not be played on this
unit. (see *1)
*1: To have more reliable play back, please
see following recommendations:
a: Use CD-RWs with speed 1x to 4x and
write with speed 1x to 2x.
b. Use CD-Rs with speed 1x to 8x and
write with speed 1x to 2x.
c. Do not play a CD-RW which has been
written for more than 5 times.
C. Notes on MP3 files (MP3 Version Only):
1. The disc must be in the ISO9660 level 1
or level 2 format, or Joliet or Romeo in
the expansion format.
2. When naming a MP3 file, be sure the file
name extension is “.MP3”.
3. For a non-MP3 file, even though the file
name extension is “.MP3”, the unit
cannot recognize it.
ReWritable
12

REMOTE CONTROL HANDSET
FUNCTION KEY & CONTROL
1. : Power ON/OFF Button.
2. VOL+: Volume up button.
3. BAND: To select FM1/FM2/FM3/FM4/MW1/MW2 band in RADIO mode.
 : In RADIO mode: Press it shortly for seek down function. Press
and hold it for manual turn down.
In MP3/WMA mode: Press it shortly for skip previous one track/file.
Press and hold it for fast reverse.
5. VOL- : Volume down button.
6. EQ: Press it to select desired audio equalization.
7. 2 SCN: In RADIO mode: Number 2. See page 10 STATION STORING.
In MP3/WMA mode: Press it turn on/off SCANNING function.
8. 1 : In RADIO mode: Number 1. See page 10 STATION STORING.
In MP3/WMA mode: Press to pause/resume playing.
9. 4 RDM: In RADIO mode: Number 4. See page 10 STATION STORING.
In MP3/WMA mode: turn on/off random function.
10. 5 DIR-: In RADIO mode: Number 5. See page 10 STATION STORING.
In MP3/WMA mode: Press it back to previous folder.
11. SRC: Switching to every source: RADIO/ USB /AUX.
12. : : Press it to mute/recover the sound.
13. : In RADIO mode: It is TS function (See page 10).
In MP3/WMA mode: It is file searching function. (See page 12)
14. SEL: Press it shortly for audio menu. Press and hold for system menu (See
page 9). In MP3/WMA searching mode press it for confirm function
（
See page 12
）
.
15. : In RADIO mode: Press it shortly for seek down function. Press
and hold it for manual turn up.
16. DISP: Press DISP to show the time.
17. 3 RPT: In RADIO mode: Number 3. See page 10 STATION STORING.
In MP3/WMA mode: Press it turn on/off repeat function.
18. 6 DIR+: In RADIO mode: Number 6. See page 10 STATION STORING.
In MP3/WMA mode: Press it to next folder.
13

SPECIFICATION
GENERAL
Power Supply Requirements : DC 12 Volts, Negative Ground
Chassis Dimensions : 178 (W) x 160 (D) x 50 (H)
Tone Controls
- Bass (at 100 Hz) : ±10 dB
- Treble (at 10 kHz) : ±10 dB
Maximum Output Power
- Version V : 4x40watts
Current Drain
- Version V : 10 Ampere (max.) (For Normal Power Version)
CD PLAYER
Signal to Noise Ratio : More than 55 dB
Channel Separation : More than 45 dB
Frequency Response : 40Hz – 18 kHz
RADIO
FM
Frequency Coverage 87.5 to 108.0 MHz
IF 10.7 MHz
Sensitivity (S/N=30dB) 4μV
Stereo Separation >25dB
MW
Frequency Coverage 522 to 1620 kHz
IF 450 kHz
Sensitivity (S/N=20dB) 36 dBuV
14

TROUBLE SHOOTING
Before going through the checklist, check wiring connection. If any of the problems persist after
checklist has been made, consult your nearest service dealer.
Symptom Cause Solution
No power. The car ignition switch is not
on.
If the power supply is connected
to the car accessory circuits, but
the engine is not moving, switch
the ignition key to “ACC”.
The fuse is blown. Replace the fuse.
Disc cannot be
loaded or
ejected.
Presence of CD disc inside
the player.
Remove the disc in the player, then
put a new one.
Inserting the disc in reverse
direction.
Insert the compact disc with the label
facing upward.
Compact disc is extremely
dirty or detective disc.
Clean the disc or try to play a new
one.
Temperature inside the car is
too high.
Cool off or until the ambient
temperature return to normal.
Condensation. Leavetheplayeroffforanhourorso,
then try again.
No sound. Volume is in minimum Adjust volume to a desired level.
Wiring is not properly
connected.
Check wiring connection.
Sound skips. The installation angle is more
than 30 degree.
Adjust the installation angle less
than 30 degree.
The disc is extremely dirty
or defective disc.
Clean the compact disc, then try to
play a new one.
The operation
keys do not
work.
The built-in microcomputer is
not operating properly due
to noise.
Press the RESET button.
Front panel is not properly fix into its
place.
The radio does
not Work. The
radio station
automatic
selection does
not work.
The antenna cable is not
connected.
Insert the antenna cable firmly.
The signals are too weak. Select a station manually.
15
Audio format: MP3/MP2/ASF/WMA/CDA
Supported Media Format:

Supplied mounting hardware
Available as an optional accessory
7607 621 …
7 608 ... ...
16

1.
12V
2.
3.
0° - 30°
+/– 10°
+/– 10°
4.
53
182 165
1-20
17

5. Removal
1.
2.
1.
2.
3.
6.
12V
18

Wiring connection
A B
1 NC 1 S peaker out R R +
2 NC 2 S peaker out R R –
3 NC 3 S peaker out R F +
4 P ermanent +12V 4 S peaker out R F –
5 Auto antenna* 5 S peaker out L F +
6 NC 6 S peaker out L F –
7 Tl.15/Ignition 7 S peaker out L R +
8 G round 8 S peaker out L R –
* S witched power s upply +12 V / max. 150 mA
19

135
248
7
4 ohms
4 ohms
4 ohms
4 ohms
6
12V
Subject to changes!
Relais
Telephone Mute
20