Blaupunkt ORLANDO 750 User manual

ORLANDO 750
TM
Compatible with Android Auto & Apple CarPlayer

IMPORTANT NOTICE &PRECAUTIONS
Thank you for using our company multi-media player!To operate the unit correctly,please read
the operation manual carefully before using.Keep this operation manual for further reference.
The unit is designed only for DC 12V negative ground operation system.Make sure your vehicle is
connected to DC 12V negative ground electrical system.Be sure to connect the speaker (-) leads to
the speaker (-) terminal.Never connect the left and right channel speaker wires together or to the
vehicle body.
The normal temperature for operation is between -20 and +6 0 degree Celsius.Do not work in
extreme high or low temperature and block vents or radiator panels of the unit,blocking them will
cause heat to build up inside the unit and may cause damage or fire.
This unit can play the multi-media files:RMVB /MPEG 4 /AVI /1080p /MP3 /WMA /JPEG.
INSTALLATION
Notes:
- Installation varies on type of cars and
supplied parts
- Store small articles in places not
accessible to children
- Install only with the supplied screws
- Installation of unit by professional
technician is strongly recommended
Remarks:
Mounting brackets and screws are the
parts that supplied in your car and not
provided in this unit.
[1]

WIRING CONNECTION
BAGIAN BELAKANG UNIT
ISO-C
RR RL
R-CAMF-CAM
SW1
V-OUT
Yellow
Orange
Blue
Black
Red
Purple / Black
Purple
Grey / Black
Grey
White / Black
White
Green / Black
Green
Pink / Black
Brown
Pink
Grey
Green
Black
Memory back up (B+)
Headlamp detection / backlight
illumination
Auto antenna
Ground (GND)
Ignition switch
Rear right speaker (-)
Rear right speaker (+)
Front right speaker (-)
Front right speaker (+)
Front left speaker (-)
Front left speaker (+)
Rear left speaker (-)
Rear left speaker (+)
Front sight
Brake Detect
Back sight
Steering wheel control (1)
Steering wheel control (2)
Steering wheel control (Ground)
MIC
MIC
Extraposition MIC jack
Green
White
Red
White
Red
Yellow
Yellow
Brown
Sw1
RR
RL
FL
FR
V-OUT
R-CAM
F-CAM
ANT
Audio output jack
Video output jack
Video input jack
Radio antenna
Sub-Woofer Output
Rear Right Speaker Output
Front Left Speaker Output
Front Right Speaker Input
Video Output
Back Sight Camera Input
Front Camera Input
Rear Left Speaker Output
SW2
FR FL
Sw2 Green Sub-Woofer Output
[2]

RST Press with a pointed object (such as a ball point)to reset the unit
to its initial setting by the factory (default stage).
IR Remote control sensor for signal reception from remote handset.
USB Insert USB device to this slot for digital files playback.
MIC Fo rvoice reception under Bluetooth operation.
TFT SCREEN It shows the status of operation on the unit.This screen is also
a touch display –soft touch the screen for different operations of
unit (refer to other parts of this manual for operation details).
Note
Printings and symbols on the above may be varied from the exact main unit.Referred
to the main
unit for exact functions and features that applied.User is highly recommended to use
the touch
screen control to operate.
MAIN UNIT OPERATION
power turn on or off & adjust sound output level
Bluetooth Mode
During unit operation, press to shift to Bluetooth mode for operation.
Press to pick up an incoming call; dial out after input a phone number; redial
last dial out number.
AUX Insert an external device to this jack in order to have sound output of that
external device through the unit.
[3]

[4]
REMOTE HANDSET –GENERAL OPERATION
BATTERY REPLACEMENT
Refer to the back of remote handset for details on
how to replace the battery.Replace only with the
same or equivalent type of battery.
BATTERY DISPOSAL
Attention should be drawn to the environmental
aspects of used battery disposal.Battery shall not
be exposed to excessive heat such as sunshine,
fire or the like.Danger of explosion if battery is
incorrectly placed.
Remove this tab before using the remote handset
NO.SYMBOL OPERATION &CONTROL MODES
1.When the unit is turn off,press to turn on the unit.
When the unit is turn on,press &hold shortly to turn off the unit.
During unit operation,press to turn on or off of sound mute control.
2. SOURCE Press repeatedly to select the desired mode for operation.
3. SYS /CLR At Bluetooth mode,press to erase the digit input by error.
4. EQ Press repeatedly to select the desired preset equalization mode.
LOUD Press &hold shortly to turn on or off of loudness control.
5. AUDIO At video and music playback mode,each time press &hold shortly to select
different audio output channels. (Note:Available on input device or media
files recorded with different output channels and this selection is not
available under Bluetooth mode)
6. OSD At media playback mode,press &hold shortly to display the contents of the
playback details on screen.
Note:Not available at music playback mode

[5]
►
7. 1–6 Radio Mode
Press any one of the number key 1-6 to select a station that had been
stored in the preset memory number key 1-6 for broadcasting.
Press &hold shortly the number key 1-6 to store the current broadcasting
frequency or station into the respective preset memory key number 1-6.
0–9 USB /SD Input Mode
Press directly to input the number of track for playback.
Bluetooth Mode
Press directly to input the phone number for dial out.
8. ZOOM USB /SD Input Mode
At video &photo playback,each time press &hold shortly to select various
zoom in and zoom out of screen for viewing.
Radio Mode
Press to start scanning all the preset stations on memory and stop for a few
seconds for broadcasting.
Press &hold shortly to start searching the frequency and storing the
strongest signal stations into the preset memory stations.After storing the
stations,the unit starts scanning all the preset stations on memory and stop
for a few seconds for broadcasting.
9. BND Radio Mode
Press repeatedly to select the desired radio band for broadcasting.
USB /SD Input Mode
Press to stop playback temporary and will shift to playlist (for playback
selection). Normal playback will resume after a while.
Bluetooth Mode
Press to hang up or refuse an incoming call.
10. RDM At USB /SD input playback mode,press &hold shortly to turn on or off of
random playback of the input device
11. INT At music playback mode,press &hold shortly to turn on or off of intro
playback of the input device. (Note:Not available at Bluetooth mode)
12. ▌▌ At USB /SD input &Bluetooth mode,press to pause,resume or start
playback.
13.
▲
/
▼
/ ▶ / ◀Folder /Playlist Mode
During folder/playlist display at media playback mode,press repeatedly to
select track for playback.Once selected,press ENT to confirm.
Photo Playback Mode
Press to rotate photo position or show up-down,left-right mirror image.

[6]
14.ENT Folder/Playlist Mode
During folder/playlist display at media playback mode,press
▲
/
▼
/▶/◀to
select the desired setting/setup and press ENT to confirm/enter.
15. / Radio Mode
Press repeatedly to fine tune radio frequency upward or downward.
Press &hold shortly to tune radio frequency to the upward or downward
station for broadcasting.
USB /SD Input Mode (Playback Mode)
Press repeatedly to shift track upward or downward for playback.
Press &hold shortly to activate fast forward or fast rewind mode.At this
mode,press repeatedly to select various speeds of fast forward or fast
rewind. (Note:Not available for operate at photo playback mode)
Bluetooth Mode
Press to shift track upward or downward for playback.
16.REP At playback mode under USB /SD input,each time press &hold shortly to
activate various repeat playback setting.
17.ANGLE Not available for operation.
18.TITLE Radio Mode
Press to select stereo (ST)or mono mode at FM radio band. (Note:At
stereo mode and when stereo signal received,stereo indicator appeared on
screen whereas this is no indication for mono mode and mono signal
received).
19.SUB-T Video Playback Mode
Each time press &hold shortly to select different sub-titles that recoded in
the input device or media files. (Note:Depended on the input device &
playback media,this function may not be available)
Radio Mode
At FM radio band,press to select local setting for reception of strong signal
stations and distant setting for reception of weak signal stations. (Note:LOC
appears on screen on local setting whereas no indication for distant setting)
20.SLOW Video Playback Mode
At video playback mode,each time press &hold shortly to select different
speeds on slow motion playback.
Bluetooth Mode
Press for “ ” symbol input.

[7]
21. VOL + / VOL -Press repeatedly or press &hold to adjust sound output level.
22. # / MENU /
PBC
Bluetooth Mode
Press for “#” symbol input.
23. SETUP During unit operation,press &hold shortly to activate setup menu on screen for
various system setup.Press &hold shortly again to return to previous
operation mode. (Note:System setup cannot be operated by remote
handset.System setup can only be operated by touch screen –refer to ON
SCREEN OPERATION for details)
24.
/
PHONE
Bluetooth Mode
Press to pick up an incoming call;dial out after input a phone number;redial
last dial out number.
Bluetooth Conversation Mode
Press to shift conversation between main unit and mobile phone.
Remarks:Depends on the input devices &playback media files,operation may be varied or not
available for operation.

[8]
ON SCREEN –MAIN MENU OPERATION
MAIN MENU MAIN MENU
1.
Touch to start radio operation (when the radio antenna connected).
2. Touch to start BT operation (when the mobile phone connected).
3.
Touch Apps to enter the main interface.
4. Touch to start USB input operation (when an USB device inserted).
5.
Touch to activate SYSTEM SETUP MENU on screen to have various setup of the unit.
6. Touch BT Music to start playback of Bluetooth music (when the mobile phone connected)
7. Touch to start auxiliary input operation (when an auxiliary device inserted)
8.
Touchtostartmobilephonemirrorlinkingoperation(whenthemobilephoneconnectedby
USBcable).
9.
Touchtostartfrontcamera(whenconnectedtofrontcameraandpink/blackwire).
ON SCREEN –RADIO OPERATION
AtMAINMENU,touch toshifttoradiomode

[9]
1.
Touch to shift to MAIN MENU for selection of various operation and setup.
2.
Touch to shift to previous mode
3.
Touch < > to turn frequency upward or downward and stop for
broadcasting when a station received.
Touch & hold repeatedly to fine tune radio frequency upward or downward.
4.
This shows the preset memory stations.
Touch any one of the preset memory station to have broadcasting of relative station.
Touch & hold shortly on any one of the preset memory station, the current
broadcasting
station/frequency will be stored in the respective preset memory station.
5.
Touch to start searching the radio frequency & storing the strongest
signal stations into memory.
6.Touchtobrowsetheradiostation.
7.
Touch to activate EQ operation.
8.
Touch to select FM1/FM2/FM3