Blaupunkt Casablanca CD50 User manual

Radio / CD
Casablanca CD50
Operating instructions

2
Open here
Ouvrir s.v.p.
Por favor, abrir
Favor abrir

3
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
3
2
10
1
4
5
11
6
798
1213141516

4
OPERATING ELEMENTS
1button to unlock release
panel
2Volume control
3ON button, switches the unit
on/off, mute
4RDS button, switches the RDS
function on/off
Selects display for variable text
5FM button, selects the FM
waveband and the FM memory
bank
TS, starts the TravelStore
function
6Display
7button, displays the time
DIS, changes display contents
8MENU button, accesses the
menu for basic settings
9button, opens the flip release
panel
:Cursor button block
;OK button, confirms menu
selections and starts the SCAN
function
<DEQ button, adjusts the
equalizer
=AUD button, adjusts bass, treble,
balance and fader
LD, switches the Loudness
function on/off
>1to 6station buttons
?AM button, selects the AM
waveband
@CD•C button, switches sound
source between radio, CD player
and CD changer (if connected)

5
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
CONTENTS
Important information .............. 6
Traffic safety .................................... 6
Installation ....................................... 6
Accessories .................................... 6
Guarantee ....................................... 6
International telephone information... 6
Removable front panel ............. 7
Switching the car audio
system on/off........................... 8
Volume control ......................... 9
Adjusting the power-on volume ........ 9
Mute ............................................... 9
Telephone audio/Navigation audio.... 9
Speed-dependent volume
adjustment .................................... 10
Adjusting the volume of the beep ... 10
Radio operation...................... 11
Switching to the radio mode .......... 11
RDS function................................. 11
Selecting the waveband/memory
bank .............................................. 11
Tuning into radio stations ............... 11
Adjusting seek tuning sensitivity ..... 11
Storing radio stations..................... 12
Storing radio stations automatically
(TravelStore).................................. 12
Recalling stored radio stations ....... 12
Scanning the radio stations within
reception range (SCAN) ................ 12
Adjusting the scan time ................. 13
Optimising radio reception............. 13
Selecting the display of variable
text ................................................ 13
Adjusting the tuner ........................ 14
CD player operation ............... 14
Starting CD player operation ......... 14
Selecting tracks ............................ 15
Audible fast forward/reverse
(CUE/REVIEW) ............................. 15
Playing tracks in random order
(MIX) ............................................. 15
Scanning tracks (SCAN) ............... 15
Repeating individual tracks
(REPEAT) ...................................... 15
Interrupting playback (PAUSE) ...... 15
Switching the display mode ........... 16
Naming CDs ................................. 16
Removing the CD .......................... 16
CD changer operation............ 17
Starting CD changer operation ...... 17
Selecting CDs ............................... 17
Selecting tracks ............................ 17
Audible fast forward/reverse
(CUE/REVIEW) ............................. 17
Switching the display mode ........... 17
Repeating individual tracks or
entire CDs (REPEAT) .................... 17
Playing tracks in random order
(MIX) ............................................. 17
Scanning all of the tracks on all
of the CDs (SCAN) ....................... 18
Interrupting playback (PAUSE) ...... 18
Naming CDs ................................. 18
Clock ...................................... 19
Adjusting the tone and
balance/fader ........................ 21
Switching Loudness on/off.... 21
Equalizer ................................ 22
External audio sources .......... 25
Specifications ........................ 25
Installation instructions .......... 96

6
Important information
Before you use your car audio system
for the first time, please take the time to
read the instruction manual carefully
and make yourself familiar with the au-
dioequipment.Keepthismanualhandy
in your car for future reference.
Traffic safety
Traffic safety is always the top
priority. Do not attempt to operate
yourcaraudiosystemunlessthetraf-
fic conditions permit. Familiarize
yourself with the equipment before
you start driving.
Always make sure that you are still
able to hear any warning signals
coming from outside the vehicle,
such as police or fire engine sirens,
at all times.
As a result, please always select a
moderatevolumeforplayingyourcar
audio system while you are driving.
Installation
If you would like to install your new car
stereoyourself oraddotheraudio com-
ponents to the existing ones, then
pleasereadtheinstructionsoninstalla-
tion and connection at the end of this
manual carefully.
Accessories
UseonlyBlaupunkt-approvedaccesso-
ries.
Remote control unit
The optionally available RC 08 infrared
remote control unit allows you to con-
veniently operate the most important
IMPORTANT INFORMATION
system functions from the steering
wheel.
Amplifiers
All Blaupunkt amplifiers can be used.
CD changers
ThefollowingCDchangerscanbecon-
nected directly: CDC A 06, CDC A 08,
CDC A 072 and IDC A 09.
The CDC A 05 and CDC A 071 can be
connectedwithanadaptercable(Blau-
punkt no. 7 607 889 093).
Guarantee
The scope of the guarantee is deter-
mined by the laws in the country where
the unit is purchased.
Regardless of the legal guarantee reg-
ulations, Blaupunkt affords a 12-month
guarantee.
If you have any questions about the
guarantee, please contact your author-
ised Blaupunkt dealer.Your cash regis-
ter receipt is a valid guarantee coupon.
International telephone
information
Have you got any questions on the
operation of this equipment or do you
require more information?
Give us a call!
You will find the international telephone
andfaxnumbersonthelastpageofthis
manual.

7
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
REMO ABLE FRONT PANEL
Removable front panel
Theft protection system
To prevent your car audio system from
being stolen, it has been equipped with
a removable front panel (flip release
panel).Without the front panel, the car
audio system is useless to thieves.
Protect your car audio system against
theft and take the operating panel with
you each time you leave the vehicle.
Neverleavethereleasepanelinthecar,
even if it is well hidden.The panel has
been designed so that it is easy to re-
move.
Notes:
●Do not drop the release panel.
●Do not expose the release panel to
direct sunlight or other heat sourc-
es.
●Store the release panel in the case
supplied.
Removing the operating panel
➮Press 1.
The release panel will unlock.
1
➮First pull the operating panel for-
ward and then slide it to the left to
remove it.
●When you remove the operating
panel, the car audio system will au-
tomatically switch off.
●All of the settings will remain
stored.
●A CD inserted into the car audio
system will remain in place.
Replacing the operating panel
➮Slide the operating panel into the
guides from left to right.
➮Press the left-hand side of the pan-
el onto the car audio system until it
locks into place.
Note:
●While replacing the panel, be care-
ful not to press on the display.
If the car audio system was on when
you removed the panel, it will automat-
icallyswitchbackonusingthesameset-
tings when you replace it (radio, CD
player or CD changer).

8
Switching the car audio
system on/off
The car audio system can be switched
on/off in a number of ways.
Switching the car audio system on/
off with the ignition
If the car audio system has been con-
nected to your vehicle ignition, it is pos-
sible to switch it on and off with the igni-
tion.
You can also switch the car audio sys-
temonwhentheignitionisswitchedoff.
➮Press down and hold 3until the
car audio system switches on.
Note:
To prevent the car battery from running
down, the radio will switch off again au-
tomatically after one hour.
Switching the car audio system on/
off with the removable front panel
➮Remove the release panel.
The car audio system will switch off.
➮Replace the release panel.
The car audio system will switch on
again.Thelast settings used (radio, CD
playerorCD changer) will be activated.
Switching the car audio system on/
off by pressing 3
➮Press 3to switch the car audio
system on.
➮Press 3for longer than 2 seconds
to switch the car audio system off
again.
The system will then switch off.
Switching the car audio system on
by inserting a CD
If the system is switched off and there
is no CD in the CD player,
➮press 9.
The flip release panel will open.
➮Insert the CD into the CD player
with the label facing up until you
feel slight resistance.Do not use
force.
TheCD willbepulledautomaticallyinto
the CD player.
Do not attempt to assist or prevent this
process.
➮Press the operating panel closed
gently until you feel it click into
place.
The audio system will switch on. CD
playback will begin.
SCHWITCHING ON/OFF

9
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
olume control
The car audio system volume can be
adjustedtolevelsfrom0(off)to66(max-
imum).
➮To increase the volume, turn the
volume control knob 2to the
right.
➮To decrease the volume, turn the
volume control knob 2to the left.
Ad usting the power-on volume
It is possible to adjust the volume at
whichthecaraudiosystemswitcheson.
➮Press MENU 8.
➮Press :repeatedly until “ON
VOLUME” appears in the display.
➮Press :to adjust the vol-
ume.
If you adjust this setting to “0”, the car
audio system will switch on at the vol-
ume used before it was switched off.
Warning of serious injury
If the power-on volume is set to the
maximum level, it may be extremely
loud when the car audio system is
switchedon.
Ifthepower-onvolumeissetto0and
the car audio system was played at
maximum volume before it was
switchedoff,itmaybeextremelyloud
when the car audio system is
switched back on. This could result
in serious injury to your ears!
➮Once you have selected the de-
sired settings, press MENU 8or
OK ;.
Mute
You can reduce the volume of the car
audio system immediately (mute).
➮Press 3briefly.
“MUTE” will appear in the display.
Selecting the mute level
It is possible to select the mute level.
➮Press MENU 8.
➮Press :repeatedly until“MUTE
LEVEL” appears in the display.
➮Press :to select the mute
level.
➮Once you have made your selec-
tion, press MENU 8or OK ;.
Telephone audio/Navigation
audio
Ifyourcaraudiosystemisequippedwith
amobiletelephoneoranavigationsys-
tem, it will automatically switch to mute
when you use the phone or when voice
output from the navigation system is
emitted. The car speakers will then be
usedforthephone call or thevoiceout-
put. This will not work unless the mo-
bile phone or the navigation system is
connected to the car audio system as
describedintheinstallationinstructions.
To find out which navigation systems
can be used with your car radio, con-
tact a Blaupunkt specialist dealer.
The volume at which phone calls or
navigation voice output are heard can
be adjusted.
➮Press MENU 8.
➮Press :repeatedly until “TEL/
NAVI VOL” appears in the display.
OLUME CONTROL

10
➮Press :to select the desired
volume level.
➮Once you have made your selec-
tion, press MENU 8or OK ;.
Speed-dependent volume
ad ustment
This function automatically adjusts the
volume to your driving speed. For this
tofunctionproperly,yourcarradiomust
beconnectedasdescribedintheinstal-
lation instructions.
The automatic volume adjustment can
be set to six levels (0 to 5).
➮Press MENU 8.
➮Press :repeatedly until “AUTO
SOUND” appears in the display.
➮Press :to select the desired
volume adjustment.
➮Once you have made your selec-
tion, press MENU 8or OK ;.
Note:
The best setting for the speed-depend-
entvolumeadjustmentdependsonhow
much driving noise you experience in
your vehicle. Use a process of trial and
error to find the best setting for your
vehicle.
Ad usting the volume of the
beep
For a number of functions you will hear
abeepifyoupressakeyforlongerthan
2 seconds, e.g. if you want to store a
radiostationonastationpreset.Youcan
adjust the volume level of this beep.
➮Press MENU 8.
➮Press :repeatedly until
“BEEP”appears in the display.
➮Press :to adjust the volume.
“0”means the beep volume is off,
“9”means the beep volume is ad-
justed to the maximum volume.
➮Once you have adjusted the set-
tings, press MENU 8or OK ;.
OLUME CONTROL

11
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
RADIO OPERATION
Radio operation
Switching to the radio mode
If you are currently using the CD player
or CD changer,
➮press CD•C @repeatedly until
“RADIO” appears in the display.
RDS function
This car audio system has been
equipped with an RDS radio receiver.
Many FM radio stations now transmit a
signal which contains such other infor-
mation as the station name along with
their regular programming. As soon as
theradiostationnameisdetected,itwill
appear in the display. The RDS func-
tion can be switched on or off.
Switching the RDS function on/off
➮To take advantage of the RDS
function, press RDS 4.
When the RDS function has been acti-
vated, the RDS symbol will light up in
the display.
Selecting the waveband/
memory bank
The car audio system is able to receive
FM and AM radio programs.There are
three memory banks for the FM wave-
band and one memory bank for the AM
waveband.
Up to six radio stations can be stored
on each of the memory banks.
➮To switch between the FM memory
banks, press FM /TS 5.
➮To select the AM waveband, press
AM ?.
Tuning into radio stations
You can tune into radio stations in a
number of different ways.
Automatic seek tuning
➮Press or :.
The radio will tune into the next availa-
ble station within reception range.
Manual station selection
You can also tune into radio stations
manually.
➮Press or :.
Note:
You cannot use manual tuning unless
the RDS function is deactivated.
Paging through the broadcasting
network (for FM only)
If a radio broadcasting network has
more than one station, you can page
through the “station network”.
➮Press or :to tune into the
next station in the network.
Note:
To take advantage of this function, you
must have activated the RDS function.
It is only possible to tune into those sta-
tions which have been received once
beforealready.Todothis,usetheSCAN
orTravelStore function.
Ad usting seek tuning sensitivity
It is possible to adjust the sensitivity of
the seek tuning function to tune the ra-
dio into stations with strong reception
signals only, or to those with weaker
reception signals as well.

12
➮Press MENU 8.
➮Press :repeatedly until
“SENS” appears in the display.
➮Press :.
The currently selected setting will ap-
pear in the display.“SENS HI”indicates
the highest level of sensitivity, “SENS
LO”thelowest.Ifyouselect“SENSLO”,
“lo” will light up in the display.
➮Press :to select the desired
sensitivity.
➮Once you have made your selec-
tion, press MENU 8or OK ;.
Storing radio stations
Storing radio stations manually
➮Select the desired FM memory
bank FM1, FM2, FMT or the AM
waveband.
➮Tune the radio into the desired sta-
tion.
➮Press and hold down one of the
station preset buttons 1to 6>on
which you want to store the radio
station for longer than two seconds.
Storing radio stations
automatically (TravelStore)
You can automatically store the six ra-
diostationswiththestrongestreception
in your current reception area (for FM
only). These stations will be stored in
the FMT memory bank.
Note:
Any stations stored previously in the
memory bank will be deleted.
➮Press and hold down FM /TS 5
for longer than two seconds.
The storing process will begin.
“TRAVEL-STORE” will appear in the
display. After the stations have been
stored, the radio will automatically be-
gin to play the station stored on preset
button 1 for the FMT memory bank.
Recalling stored radio stations
➮Select the desired station memory
bank.
➮Press the station button 1to 6>
on which you have stored the de-
sired radio station.
Scanning the radio stations
within reception range (SCAN)
You can scan all of the radio stations
currently within your reception range.
The scan time can be set in the menu
to play from five to 30 seconds.
Starting SCAN
➮Press and hold down OK ;for
longer than two seconds.
SCAN will begin. “SCAN” will appear
briefly in the display, followed by the
flashing station name or frequency of
the radio station currently being
scanned.
Stopping the SCAN function,
continuing to listen to the radio
station scanned
➮Press OK ;.
SCAN will end and the last station
scanned will continue playing.
RADIO OPERATION

13
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Ad usting the scan time
➮Press MENU 8.
➮Press :repeatedly until
“SCANTIME” appears in the dis-
play.
➮Press :to set the scan time
as desired.
➮Once you have made your selec-
tion, press MENU 8or OK ;.
Note:
The scan time selected also applies to
theSCANfunctionfortheCDplayerand
the CD changer operation.
Optimising radio reception
Interference-related treble cut
(HICUT)
TheHICUTfunctionimprovesreception
when reception begins to deteriorate.If
interference occurs, then the trebleand
the noise is cut automatically.
Switching HICUT on/off
➮Press MENU 8.
➮Press :repeatedly until “HI-
CUT” appears in the display.
➮Press or :to switch HICUT
on or off.
“HICUT 0” indicates that the function is
switched off;when “HICUT 3”appears,
the treble will be automatically cut as
far as possible.
➮Press MENU 8or OK ;.
RADIO OPERATION
Interference-dependent bandwidth
switching (SHARX)
The SHARX function allows you to vir-
tuallyeliminateinterferencefromneigh-
bouring radio stations.When you are in
a reception area with a large number of
radiostationsignals,switchtheSHARX
function on.
Switching SHARX on/off
➮Press MENU 8.
➮Press :repeatedly until
“SHARX”appears in the display.
➮Press or :to switch SHARX
on or off.
“SHARX OFF” means no bandwidth
switching, “SHARX ON” means auto-
matic bandwidth switching.
➮Press MENU 8or OK ;.
Selecting the display of variable
text
AnumberofradiostationsusetheRDS
signal to transmit advertising or other
texts in place of their station names.
These“variable texts”will appear in the
display. It is possible to adjust your ra-
dio so that these “variable texts”do not
appear.
➮Press and hold down RDS 4until
“NAME FIX” appears in the display.
➮To have the “variable texts” dis-
played again, press and hold down
RDS 4until “NAMEVAR”appears
in the display.

14
Ad usting the tuner
This car audio system has been
equipped with a multiband tuner. The
tunercanbeadjusted to accommodate
country-specific requirements. The
availableregionsare:America,Europe,
Asia and Thailand.The tuner is not fully
functional unless it has been set to the
country in which it is used.
Ad usting the tuner
➮Press MENU 8.
➮Press :repeatedly until “FM
TUNER” appears in the display.
➮Press :to select the country.
➮Once you have completed the set-
ting, press MENU 8or OK ;.
CD player operation
The CD player in this car audio system
can be used to play conventional mu-
sic CDs with a diameter of 12 cm.
Danger of damage to the CD
player!
CD singles with a diameter of 8 cm
and contour CDs (shape CDs) are
notsuitableforusewiththisCDplay-
er.
We assume no liability for any dam-
age done to the CD player resulting
from the use of unsuitable CDs.
Starting CD player operation
●If there is no CD in the player,
➮press 9.
The flip release panel will open.
➮Insert a CD into the player with the
label facing up until you feel slight
resistance. Do not use force.
The CD will be pulled into the player
automatically.
Do not attempt to assist or prevent this
process.
➮Press the operating panel closed
gently until you feel it click into
place.
The audio system will switch on. CD
playback will begin.
●If there already is a CD inserted
into the player,
➮press CD•C @repeatedly until
“CD” appears in the display.
Playbackwillresumeatthepointwhere
it was interrupted.
RADIO OPERATION CD PLAYER OPERATION

15
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
Stopping the SCAN function,
continue listening to the current
track
➮To stop the SCAN function, press
OK ;.
The track currently scanned will contin-
ue playing.
Repeating individual tracks
(REPEAT)
➮To repeat the track currently play-
ing, press 4RPT >.
“REPEAT TRCK”will appear in the dis-
play, the RPT symbol will light up.The
trackwill continue to repeat until RPTis
deactivated.
Stopping the REPEAT function
➮If you want to stop the REPEAT
function, press 4RPT >again.
“REPEATOFF”willappearbrieflyinthe
display, the RPT symbol will no longer
light up. CD playback will resume nor-
mally.
Interrupting playback (PAUSE)
➮Press 3>.
“PAUSE” will appear in the display.
Stopping PAUSE
➮Press 3>during the pause.
Playback will resume.
Selecting tracks
➮Press a key on the cursor block :
to select the next or the previous
track.
Press or :once to restart the
same track.
Audible fast forward/reverse
(CUE/REVIEW)
To start Cue or Review,
➮press and hold down either or
:until the process begins.
Playing tracks in random order
(MIX)
➮Press 5MIX >.
“MIX CD” will appear briefly in the dis-
play, the MIX symbol will light up in the
display. The next track played will be
selected at random.
Stopping the MIX function
➮Press 5MIX >again.
“MIX OFF”will appear briefly in the dis-
play and the MIX symbol will no longer
light up.
Scanning tracks (SCAN)
You can scan all of the tracks on the
CD.
➮Press OK ;for longer than two
seconds. Scanning will begin with
the next track.
Note:
Itispossibletoadjustthescantime.For
more information, read the section on
“Adjusting the scan time” in the chapter
on “Radio Operation”.
CD PLAYER OPERATION

16
Switching the display mode
➮To switch the display between the
track number and time or the track
number and elapsed playing time
or track number and CD name,
press /DIS 7for longer than
two seconds once or repeatedly
until the desired display becomes
visible.
Naming CDs
To help you to identify your CDs more
easily, the car audio system allows you
to individually name up to 30 CDs.The
name can be made up of up to eight
letters.Ifyouattempttoentermorethan
30names,“FULL”willappearinthedis-
play.
Entering/editing CD names
➮You are listening to the CD you
want to name.
➮Press MENU 8.
➮Press :to select
“CD NAME”.
➮Press or :twice.
The car audio system is now in the edit
mode. If the CD you selected does not
yet have a name, eight dashes will ap-
pear in the display.
➮The first input position will flash.
➮Press :to select the letter
you want to enter.If you want to
leave this position blank, select the
dash.
➮Press or :to move the cur-
sor to a different input position.
➮Press MENU 8or OK ;to store
the name.
Deleting a CD name
➮You are listening to a CD and
would like to delete its name.
➮Press MENU 8.
➮Press :to select
“CD NAME”.
➮Press or :.
➮Press and hold down MENU 8.
After four seconds you will hear a
beep and“DELETE NAME” will ap-
pear in the display.
➮ReleaseMENU 8.
The CD name will be deleted.
➮Press OK ;to return to the menu.
Removing the CD
➮Press 9toactivatetheejectfunc-
tion.
Theflipreleasepanelwillfolddown,the
CD will eject.
➮Remove the CD and close the oper-
ating panel.
CD PLAYER OPERATION

17
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
CD changer operation
Note:
For information on how to handle CDs,
how to insert CDs into the changer and
how to operate the changer, please re-
fer to the instructions included with the
CD changer.
Starting CD changer operation
➮Press CD•C @repeatedly until
“CHANGER” appears in the dis-
play.
Playback will begin with the first CD the
changer detects in the magazine.
Selecting CDs
➮To select a CD up or down in the
magazine, press or :the
required number of times.
Selecting tracks
➮To select a different track on the
CD currently playing, press or
:the required number of times.
Audible fast forward/reverse
(CUE/REVIEW)
To start Cue or Review,
➮press and hold down either or
:until the process begins.
Switching the display mode
➮To switch the display between the
track number and elapsed playing
time or the track number and time,
or track number and CD number or
track number and CD name, press
/DIS 7for longer than two
seconds once or repeatedly as re-
quired, until the desired information
appears in the display.
Repeating individual tracks or
entire CDs (REPEAT)
➮To repeat the track currently play-
ing, press 4 RPT >briefly.
“REPEAT TRCK” will appear briefly in
the display, RPT will light up in the dis-
play.
➮To repeat the entire CD currently
playing, press 4 RPT >again.
“REPEATDISC”willappearbrieflyinthe
display, RPT will light up in the display.
Stopping the REPEAT function
➮To stop the REPEAT function for
the current track or CD, press
4 RPT >repeatedly until
“REPEAT OFF” appears in the dis-
play and RPT no longer lights up.
Playing tracks in random order
(MIX)
➮To play the tracks of the currently
selected CD in random order,
press 5 MIX >briefly.
“MIX CD” will appear briefly in the dis-
play, MIX will light up in the display.
➮To play the tracks of all of the CDs
in random order, press 5 MIX >
again.
“MIX ALL” will appear briefly in the dis-
play, MIX will light up in the display.
Note:
The CDC A 08 and the IDC A 09 are
also able to play all of the CDs in the
changerin randomorder.The other CD
CD CHANGER OPERATION

18
changers first play all of the tracks on a
CDinrandomorderandthenselectthe
next CD in the changer.
Stopping the MIX function
➮To stop the MIX function, press
5 MIX >repeatedly until “MIX
OFF” appears briefly in the display
and MIX no longer lights up.
Scanning all of the tracks on all
of the CDs (SCAN)
➮To scan all of the tracks on all of
the CDs in ascending order, press
OK ;for longer than two sec-
onds.
“SCAN” will appear in the display.
Stopping the SCAN function
➮To stop the SCAN function, press
OK ;briefly.
The track currently scanned will contin-
ue playing.
Note:
Itispossibletoadjustthescantime.For
more information, read the section on
“Adjusting the scan time” in the chapter
on “Radio Operation”.
Interrupting playback (PAUSE)
➮Press 3>.
“PAUSE” will appear in the display.
Stopping PAUSE
➮Press 3>during the pause.
Playback will resume.
Naming CDs
To help you to identify your CDs more
easily, the car audio system allows you
to individually name up to 99 CDs.The
name can be made up of up to seven
letters.
If you attempt to enter more than 99
names,“FULL”willappearinthedisplay.
Entering/editing CD names
➮Press MENU 8.
➮Press :to select“CDC
NAME”.
➮Press or :.
The car audio system is now in selec-
tionmode.
➮Press :to select the CD
you would like to name.
➮Press or :.
Now you are in the edit mode.If the CD
youselecteddoesnotyethaveaname,
sevendasheswillappearinthedisplay.
➮The first input position will flash.
➮Press :to select the letter
you want to enter. If you want to
leave this position blank, select the
dash.
➮Press or :to move the cur-
sor to a different input position.
➮Press MENU 8or OK ;to store
the name.
Deleting a CD name
➮You are listening to a CD and
would like to delete its name.
➮Press MENU 8.
CD CHANGER OPERATION

19
FRANÇAIS ENGLISH
ESPAÑOL
PORTUGUÊS
➮Press :to select “CDC
NAME”.
➮Press or :.
➮Press and hold down MENU 8.
After four seconds you will hear a
beep and “DELETE NAME”will ap-
pear in the display.
➮Release MENU 8.
The CD name will be deleted.
➮Press OK ;to return to the menu.
Deleting all of the CD names
You want to delete all of the names en-
tered for the CDs.
➮You are listening to a CD.
➮Press MENU 8.
➮Press :to select “CDC
NAME”.
➮Press or :.
➮Press and hold down MENU 8.
After four seconds you will hear a
beep and “DELETE NAME”will ap-
pear in the display. Continue to
hold down MENU 8until you hear
a second beep and “DELETE ALL”
appears in the display.
➮Release MENU 8.
All of the CD names stored will be de-
leted.
➮Press OK ;to return to the menu.
CLOCK
Displaying the clock briefly
➮To display the time briefly, press
/DIS 7briefly.
Setting the time
The time can be set automatically by
the RDS signal.If you are unable to re-
ceiveanRDSradiostationoriftheRDS
stationyouarelisteningtodoesnotsup-
port this function, you can also set the
time manually.
Setting the time automatically
➮To set the time automatically, press
MENU 8.
➮Press :until “CLOCK MAN”
(manual) or“CLOCK AUTO” (auto-
matic) appears in the display.
➮Press :until “CLOCK AUTO”
appears in the display.
➮Once you have made your selec-
tion, press MENU 8or OK ;
twice.
When you tune into a radio station with
the RDS clock function (RDS-CT), the
time will be set automatically.
Setting the time manually
➮To set the time, press MENU 8.
➮Press :repeatedly until
“CLOCKSET” appears in the dis-
play.
➮Press :.
The time will appear in the display.The
minutes will flash and can be altered.
CD CHANGER OPERATION CLOCK

20
➮Press :to alter the minutes.
➮Once you have altered the min-
utes, press :.The hours will
begin to flash.
➮Press :to alter the hours.
➮Press MENU 8or OK ;.
Selecting the 12/24-hour time
display mode
➮Press MENU 8.
“MENU” will appear in the display.
➮Press :repeatedly until “24 H
MODE” or “12 H MODE”appears
in the display.
➮Press or :to switch the dis-
play mode.
➮Once you have selected the mode,
press MENU 8or OK ;.
Activating the clock for display
when the car audio system is
switched off
➮To activate the clock for display
when the car audio system is
switched off, press MENU 8.
“MENU” will appear in the display.
➮Press :repeatedly until “CLK
DISP OFF” or “CLK DISP ON” ap-
pears in the display.
➮Press or :to switch the clock
display on or off.
➮Once you have made the setting,
press MENU 8or OK ;.
Displaying the time briefly when
the car radio is switched off
To display the time briefly when the car
radio is switched off,
➮press /DIS 7.
The time will then appear in the display
for eight seconds.
CLOCK