Blaupunkt BB16WH User manual

BB16BK/BB16WH
Owner's Manual
Instrukcja obsługi
Návod k použití
Navodila za uporabo
Használati útmutató
Upute za upotrebu
Instrucţiune de deservire
Инструкция за употреба
Οδηγίες χρήσης
Kasutusjuhend
Naudojimo instrukcijos
Užívateľská príručka

BB16BK/BB16WH
1

BB16BK/BB16WH
2

BB16BK/BB16WH
3

BB16BK/BB16WH
4

BB16BK/BB16WH
5

BB16BK/BB16WH
6

BB16BK/BB16WH
7

Name of controls
1. Handle;
2. FM Antenna;
3. CD Compartment;
4. Pause key;
5. Stop/eject key;
6. Fast-forward key;
7. Rewind key;
8. Play key;
9. Record key;
10. 10/fold./M.- button;
11. 10/fold./M.+ button;
12. Play/pause button;
13. Stop button;
14. Volume decrease button;
15. Volume increase button;
16. Standby/function button;
17. Next/Tune + button;
18. Program/memory/play mode button;
19. Previous/Tune – button;
20. Speaker;
21. Cassette compartment;
22. AC socket;
23. Battery compartment;
24. Phone jack;
25. Aux in jack;
26. LCD display;
27. USB port;
BB16BK/BB16WH
8

Power source
This unit is designed to be operated both with AC and with DC.
AC operation
Plug the tail of AC power cord into AC jack on unit and the cord into AC wall outlet. The
batteries will be automatically disconnected.
DC operation
Open the BATTERY COMPARTMENT DOOR. Install 6 pcs UM-1/D size batteries (not included)
into compartment. Please follow correct polarities as indicated.
Caution
Remove batteries if they are flat or not being used for a long time.
Batteries contain chemical substances, so they should be disposed of properly.
Basic function
Switching on the unit
After connecting the power, press standby/function button to turn on the unit, then press the
standby/function button again to choose CD /USB/ AUX/TAPE or RADIO mode. Long press
standby/function button to turn off the unit.
NOTE: In CD/USB/AUX/TAPE mode, when the unit is not providing the main function for 60
minutes, the unit will automatically switch into standby mode. In the tape mode, only the tape
stops for 60 minutes, the unit will automatically switch into standby mode. To turn on the unit
again, press standby/function button or re-plug the unit.
ESD hints – The product maybe reset or not reset to operation of control due to electrostatic
discharge, just switch off and reconnect again.
Adjust volume
Press VOL.+/- button to increase or decrease volume.
Headphone jack
For private listening, connect a 3.5mm headphone (not included) to the headphone jack. The
speaker output will be automatically disabled.
Caution: listening at a high volume over a long period is not good for your ears.
Using the radio
Before start the radio listening, please full extent the FM antenna and try to move the unit next
to window in order to get better signal reception; press the standby/function enter to the FM
radio mode.
1. FM tune and scan: short press Tune +/- button to increase or decrease the FM frequency per
0.05MHz. Press and hold Tune +/- button 2 seconds to auto scan and play the available
station in upward or downward frequency; press and hold it again to scan the next station.
2. FM manual preset memory: when you tuned a favorite by Tune +/- button, press
Program/memory/play mode button to start the preset program; press 10/fold./M.- or
10/fold./M.+ button to switch the preset station number (Max supported 40 preset stations)
that you want to save, press program/memory/play mode button again to confirm your
selection; then the station will be saved as your selected preset number.
3. All-in-one scan (auto scan and preset station up to 40): short press the play/pause button to
scan and save the available station automatically; short press 10/fold./M.- or 10/fold./M.+
button to pick up the preset station.
Cassette operation
Playback of cassette
Be sure to tighten any slack tape in the cassette before using, use either a pencil or a ball-point
pen, simply insert the pen or pencil into the center of spool and rotate to remove slackness.
Press the STOP/EJ button to open the cassette door.
Insert the cassette into the compartment with the open end facing upwards and the full reel on
the left hand side, push the cassette well down and close the door, be sure not to touch the tape
surface, Set the function switch to “TAPE” and press the cassette play button. To stop playback,
press the STOP/EJ button once. To release the cassette, press the STOP/EJ button again.
BB16BK/BB16WH
9

AUTO STOP
When the tape reaches the end during playback or recording, the built-in auto stop system will
release the play button or record button. The auto stop system would only bring the cassette
function to stop mode while recording from the built-in radio or CD player, the radio or CD
player will continue to play.
Recording from radio
1. Load a blank tape into the tape compartment and close the door.
2. Press the Standby/Function button to Choose FM mode.
3. Tune to required station by pressing Next/TUN. + Or previous/ TUN-.
4. Press RECORD key to begin recording. RECORD key and PLAY key go down simultaneously.
5. Press STOP/EJ. Key to end recording.
6. To hear what you recorded, follow instructions in playback a cassette.
Note: Pause for a moment - Using the Pause key on the cassette deck instead of the STOP/EJ.
Key to momentarily interrupt recording gives you a much clear recording. Press Pause key again
to resume recording.
Recording from CD/USB/AUX
1. Insert a blank cassette tape into the tape compartment.
2. Press the standby/function button to Choose CD, USB or AUX mode.
3. Load a CD, or insert a USB, or connect an external audio device from AUX jack, then select
the desired track you want to record.
4. Press Play/Pause button to start playback. Press Record key to begin recording. Record
key and Play key go down simultaneously.
5. Press Pause key to interrupt or edit recording. Press it again to resume recording.
6. Press STOP/EJ. Key to end recording.
7. To hear what you recorded, follow instructions in playback a cassette.
Types of cassette
Use only good quality cassettes (IEC TYPE 1) for making recordings. The use of C120 cassettes is
NOT recommended in this machine.
Care of cassette mechanism
Gently clean the tape head and pinch wheel/capstan assemblies after every 10 hours of using
the unit.
The play head and surface of the pinch roller are delicate and shall not be touched with metal
objects such as screwdrivers. You may find it easier to clean the assembly by pressing the Play
button to bright head and pinch roller into view. Be sure to press the Stop button after cleaning
the mechanism.
Damage to the pinch wheel can occur if the unit is left in Play mode with the power switch off.
Under no circumstances should you attempt to lubricate any part of the machine.
BB16BK/BB16WH
10

CD/MP3 operation
Discs for Playback
This system can playback all digital audio CD, MP3, WMA finalized digital audio CD-Recordable
(CD-R) discs, finalized digital audio CD-Rewritable (CD-RW) discs and CD-DA format digital
audio CD/CD-R/CD-RW discs.
LOADING A DISC
1. Press the STANDBY/FUNCTION button to choose CD mode.
2. Open the CD door. “ OPEN ” will be shown on the display.
3. Place an audio CD into the tray with the label side facing up.
4. Close the CD door. The total number of tracks will appear on the display after reading
finished.
5. To remove the CD, press Stop button and open CD compartment lid, grasp the CD by its
edges, and carefully take it out.
Note:
1. To ensure good system performance; wait until the disc tray completely read the disc before
proceeding.
2. If no disc is loaded into the compartment, or the disc is placed upside down, the display will
show N0 CD.
Playing a disc
After loading a disc, playback starts from track 1 automatically.
To interrupt playback, press the Play/Pause button. The play indicator will flash and current
track no. will show on the display.
To resume playback, press the Play/Pause button again.
To stop playback, press the Stop button, the total number of tracks appears on the display.
Selecting a desired track/passage
To select a desired track
Press the Next/TUN.+ or prevous/TUN.- button repeatedly in stop mode or during play until the
desired track appears on the display.
To search for a particular passage during playback (track scanning at high speed)
Press and hold the Next/TUN.+ or previous/TUN.- button to scan the current playing track at
high speed until desired passage appears, and then release the button. Playback will start
again from this point.
To select a song which track number exceeds 10（for MP3 disc only）
To select a song/track which number exceeds 10, Press the 10/fold./M.+ or 10/fold./M.- button
each time to skip forward/backward 10 tracks, then press the Next/TUN.+ or previous/TUN.-
button to select desired track. For example: to select the 17th track, press 10/fold./M.+ button,
and then press the Next/TUN.+ six times immediately.
To Select a desired folder（for MP3 disc only）
(if the MP3 disc contains more than one folder)
To skip to the desired folder during playback, press and hold the 10/fold./M.+ or 10/fold./M.-
button for about 2 seconds to skip to next/previous folder.
Program tracks
Programming tracks of disc are possible when playback is stopped. Up to CD 20 tracks /MP3 99
tracks can be stored in the memory in any order.
1. In stop mode, press the PROG./MEM./P-MODE button, the “PROG” will flash and the P01
indicator will be on.
2. Press the Next/TUN.+ or previous/TUN.- button to select the first desired track to be
programmed.
3. Press the PROG./MEM./P-MODE button to enter. The display changes to show P02.
4. Repeat steps 2 & 3 to store other desired tracks until all tracks are programmed.
5. Press the Play/Pause button to start playback from the first programmed track.
6. Press the Stop button to stop program playback.
BB16BK/BB16WH
11

To Erase the Memory (Program)
To clear the program, you have two options:
1. Press the Stop button when the disc is stopped, or
2. Open the CD compartment lid, program will be erased.
Repeat
To repeat a single track
Press the PROG./MEM./P-MODE button once in play mode, “ ” will flash on the display. The
current track will be played repeatedly until the Stop button is pressed.
To cancel Repeat function, press the PROG./MEM./P-MODE button until the “ ” disappear on
the LCD display.
To repeat all the Tracks
1. Press PROG./MEM./P-MODE button in play mode till the “ ” shows steady on the
display, all tracks on the disc will be played repeatedly until the Stop button is pressed.
2. To cancel Repeat function, press the PROG./MEM./P-MODE button until the “ ”
disappear on the LCD display.
To repeat current folder (for MP3 only)
1. Press PROG./MEM./P-MODE button in play mode, till the “ FOLD ” shows steady on
the display, the current folder will be played repeatedly until the Stop button is pressed.
2. To cancel Repeat function, press the PROG./MEM./P-MODE button until the “ FOLD”
disappear on the LCD display.
Random play
Press the PROG./MEM./P-MODE button in play mode till the “RDM ” shows steady on the
display, the random play will start immediately until all tracks are played over and then stop.
Press the PROG./MEM./P-MODE button once to cancel.
Intro
Press the PROG./MEM./P-MODE button on unit in play mode till the “INTRO” shows steadily on
the display, the intro play will start and scan 10 seconds for every track. To cancel intro play,
press the PROG./MEM./P-MODE button until “INTRO” disappear from the display.
USB operation
1. Press the STANDBY/FUNCTION button to choose USB mode.
2. Connect the USB to the USB INPUT. The LCD will show the total number of tracks and
folders stored in the USB. After reading the USB, the unit will start playback
automatically.
3. Press the Stop button on unit to stop playing. The display will show total number of track
in USB.
4. Proceed repeat play (repeat 1- repeat folder - repeat all-)/program play/skip up and back
operation as the same described in above “CD/MP3 OPERATION”.
Caution:
1. Do not use any USB extension cable for connecting the USB bar which may cause harmful
interference
2. The USB port only available for playing music. It does not support charging feature for
any device.
3. The maximum size of the Flash Drive that can be supported is up to 32GB. USB is suitable
for music playback only. Most of MP3 files are supported and other music formats may
not be played.
4. Smartphone playback via USB cable and encrypted USB devices may not be supported
on this unit.
BB16BK/BB16WH
12

AUX IN OPERATION
This unit provides a 3.5mm AUX IN jack, through this jack other audio sources can be
connected to this unit and be amplified.
1. Press the Standby/function button to choose AUX mode.
2. Connect the audio cable (not include) into the AUX IN jack and the other end connects to
the AUDIO OUT jack of the external audio source. The unit will change to AUX mode
automatically.
3. Adjust the volume of the main unit to your desired level.
4. Press PLAY of the external audio source (eg. MP3 player) to start playback.
Specification
Power Requirement AC100-240V ~60/ 50Hz
DC 9V UM-1 x 6 PCS(battery no include)
Weight Approx.1.46 kg
Dimensions Approx. 285mm (W) x 213mm (D) x 140mm (H)
Operation temperature +5 o C – +45 o C
FM Frequency Range 87.5– 108 MHz
USB Max supported device up to 32GB
Optical Pickup 3 – Beam Laser
Frequency Response 100Hz – 16KH z
Recording System 2 Tracks 2 Channel (Stereo)
Bias System DC Bias
Frequency Response 125 – 6.3 K H z
Wow and Flutter 0.35% WRMS (JIS)
Power output 1.5 Watts x 2
Power consumption 12 Watts
Standby power consumption <0.5W
(the above spec may update without prior notice)
BB16BK/BB16WH
13

BB16BK/BB16WH
14

BB16BK/BB16WH
15

BB16BK/BB16WH
16

BB16BK/BB16WH
17

BB16BK/BB16WH
18