Blaupunkt XSMART User manual

BLAUPUNKT
XSMART
EN USER MANUAL

2
Congratulations! And thank you for buying a great new product from
Blaupunkt. With the Blaupunkt Bluebot XSMART robot vacuum cleaner,
you can clean most oor types with the greatest of ease.
This manual is specic to the Blaupunkt Bluebot XSMART robot vacuum
cleaner as specied in section 2.1 Intended use. Hereafter the Blaupunkt
Bluebot XSMART robot vacuum cleaner will be referred to as‘the robot’.
This manual is intended to help the user to set up and operate the robot.
It also describes the operation of the robot with the BluebotXS app.
Download the app on your smartphone for maximum operating ease.
We kindly ask you to carefully read the information in this manual before
using the robot, to familiarise yourself with its intended use and potential
dangers and risks.
support.blaupunktrobotics.eu
[phone]
[email protected]
We also have a live chat feature on our website!
© 2018 Blaupunkt XSmart UM
All rights reserved. No parts of this work may be reproduced in any
form or by any means – (graphic, electronic, or mechanical, including
photocopying, recording, taping, or information storage and retrieval
systems) – without the written permission of the publisher.
Revision 01/2018
FOREWORD

3
EN
TABLE OF CONTENTS
1. Reading guide ...........................................................................................4
2. Safety.........................................................................................................5
2.1 Intended use .......................................................................................................................5
2.2 General safety .....................................................................................................................5
2.3 Product safety.....................................................................................................................5
2.4 Electrical safety...................................................................................................................6
2.5 Fire and explosion hazard...............................................................................................6
2.6 Maintenance........................................................................................................................6
2.7 Transport and Storage.....................................................................................................7
2.8 Recycling and Disposal....................................................................................................7
3. General product description....................................................................8
3.1 Main parts.............................................................................................................................8
3.2 Dierent cleaning kits for dierent cleaning purposes.......................................9
3.3 Cleaning modes .................................................................................................................9
4. General description of the control types............................................. 10
4.1 LED panel...........................................................................................................................10
4.2 Remote control................................................................................................................11
4.3 BluebotXS app.................................................................................................................12
4.4 Available functions per control type....................................................................... 13
5. Getting started....................................................................................... 14
5.1 Unpacking the box.........................................................................................................15
5.2 Mounting the brushes ..................................................................................................16
5.3 Installing the suitable cleaning kit ...........................................................................16
5.4 Installing the charging station...................................................................................18
5.5 Placing the magnetic strips.........................................................................................19
5.6 Charging the robot ........................................................................................................ 20
5.7 Placing the batteries in the remote control.......................................................... 21
5.8 Setting the time ..............................................................................................................21
5.9 Installing the BluebotXS app on your mobile phone........................................22
5.10 Connecting the BluebotXS app to your robot.....................................................22
6. Operation ............................................................................................... 24
6.1 Before running the robot.............................................................................................24
6.2 Running the robot in Auto Cleaning mode ..........................................................24
6.3 Running the robot in other cleaning modes........................................................24
6.4 Interrupt / stop the robot ............................................................................................25
7. Scheduling the robot............................................................................. 26
7.1 Scheduling the robot with the remote control ...................................................26
7.2 Scheduling the robot with the BluebotXS app....................................................27
7.3 Schedule the robot with the LED panel .................................................................28
8. Maintenance........................................................................................... 29
8.1 Maintenance schedule .................................................................................................29
8.2 Cleaning the side brushes...........................................................................................30
8.3 Cleaning the dust bin and the lters.......................................................................31
8.4 Cleaning the sensors and wheels .............................................................................32
8.5 Cleaning the charge poles...........................................................................................33
8.6 Cleaning the suction passage and the dust sensor ..........................................33
8.7 Cleaning the normal suction nozzle .......................................................................34
8.8 Cleaning the brush suction nozzle...........................................................................34
8.9 Replacing the battery....................................................................................................35
9. Troubleshooting .................................................................................... 36
10. Disposal .................................................................................................. 37
11. Technical specications......................................................................... 38

4
1. READING GUIDE
This manual includes notes and warnings on safe operation of the robot.
These notes and warnings are marked with the following signal words.
Read them carefully!
1 DANGER!
The signal word that indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
1 WARNING!
The signal word that indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury and/or cause serious damage to the
robot.
1 CAUTION!
The signal word that indicates a hazard with a low level of risk which, if not avoided,
could result in minor or moderate injury and/or cause damage to the robot.
NOTICE
The signal word that indicates information that is considered important, although
not hazard-related (e.g. messages relating to property damage).
Table 1 - Symbols used in this manual
This manual includes instructions for all available control types. These
instructions are marked with the following symbols, each representing a
control type.
Instructions relating to operating the robot with the LED panel.
Instructions relating to operating the robot with the BluebotXS app.
Instructions relating to operating the robot with the remote control.
Table 2 - Symbols representing the dierent control types

5
EN
This section contains safety instructions for protection from risk of personal
injury or property damage. Failure to follow these instructions shall void
any warranty.
2.1 Intended use
The Blaupunkt Bluebot XSMART robot vacuum cleaner is intended for
cleaning a wide range of ooring, such as carpet, laminate ooring, tiles
etc. The robot is not suitable for high pile carpets. On this material, the
robot can become stuck and unable to move around.
The robot can only be operated with the LED panel, the remote control
and the BluebotXS app. The robot is intended to be used with its original
accessories only, and is intended for domestic use only. The robot is not
intended for use in environments with high humidity, like bathroom areas.
2.2 General safety
• This appliance can be used by children aged eight years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, if they have been given supervision or
instruction concerning use of the appliance in a safe way and
understand the hazards involved.
• Young children and pets should be supervised to ensure that they do
not play with the appliance.
• The robot must be used in an environment with a temperature between
0°C and 40°C.
• Do not use the robot in a wet or moist environment (any environment
with liquid), e.g. bathroom area or laundry.
• Do not use the product if it is defective.
• Only use the original accessories.
• Repairs must only be performed by Blaupunkt Robotics or its ocially
authorized partners.
2.3 Product safety
•
1 WARNING!
• The rotating wheels and roller brush of the robot can clamp ngers. Do
not touch the wheels or roller brush while the robot is in operation.
• A damaged or leaking battery can cause re, explosion or personal
injury. Never dismantle the battery case. Do not throw the battery into
re or heat the battery and do not crush or throw the battery. In the
event that battery leakage contacts your skin or clothes, immediately
wash o the leakage with clean water.
•
• Before use, remove all fragile objects, cords, clothing, paper and loose
cables from the oor and lift curtains and drapes o the oor to avoid
any possible accidents.
• Make sure the robot does not come into contact with cigarette ends,
lighters, matches or any ammable substance.
• Do not place the robot on tables, chairs, etc, as damage may occur
should it fall o.
• Do not let a curtain or any kind of wrapping material wind up in the
drive wheels.
• Do not use the robot outdoors.
• Do not expose the robot to sunlight.
2. SAFETY

6
• Do not use a covered or wrapped robot.
• Do not block or insert objects into the ventilation holes of the robot.
• Do not put the robot near a heat source.
• Do not sit on the robot and do not attach an object to the top of it.
2.4 Electrical safety
•
1 WARNING!
• In the case of overheating during charging, stop using the robot
immediately. Turn OFF the power switch and remove the adapter from
the power socket.
• A damaged power cord can cause electric shock, overheating or re. Do
not destroy or modify the power cord and do not bend it too tightly. Do
not heat the cord. Do not pull or press the inexible cord excessively
with heavy objects.
• Dust on the metal terminals of the power plug can result in electric
shock, overheating or re. Regularly remove the dust from the power
plug and surroundings with a dry cloth.
• Wet hands can conduct the electric current from the robot
unintentionally and cause electric shock. Do not touch the power cord,
plug or adapter with wet hands.
• Charging and powering the robot with components that are not original
parts can cause electric shock, overheating or re. Only use the original
battery, charging base and power adapter (UK Type Adapter Model No.:
GQ12-240060-AB; EU Type Adapter Model No.: GQ15-240060-AG).
• A short-circuit occurs when the positive (+) pole and the negative (-)
pole of the battery are connected. Short-circuits can cause heat
generation in metal objects, re or explosion. Prevent short-circuits by
keeping metal objects or conducting substances away from the battery
poles.
•
• Before charging, check whether the adapter and outlet are properly
connected.
• The adapter must use an alternating voltage of 100-240 VAC.
• Do not use the power adapter with an AC converter.
2.5 Fire and explosion hazard
• Do not switch the robot on within or let the robot enter a ammable
and/or combustible environment.
• Do not use the robot to clean combustible or highly volatile substances,
such as gasoline.
2.6 Maintenance
• Never wash the main body or the charging device. Only the dustbin and
lters are washable (except HEPA lters). Do not wash other parts of this
robot. Return the dustbin and lters to the main body when dry.
• Clean the outside of the robot with a soft cloth. When the robot is very
dirty, use a slightly damp cloth and a neutral solution.
• When the dustbin is full, empty it before next use.
• Cleaning and user maintenance should not be done by children without
supervision.

7
EN
2.7 Transport and Storage
• We recommend that you retain the original carton and packing
materials for transporting the robot for service. This is the only way to
safely protect the robot against damage in transit. If you do dispose of
the carton and the packing materials, please remember to recycle with
due care for the environment.
• Turn o the power switch when the robot will not be used for an
extended period of time. Battery leakage may cause re, injury or
pollution to the environment. Cut the power source of the adapter and
disconnect the plug from the socket.
2.8 Recycling and Disposal
• The battery must be insulated with tape when taken for recycling or
disposal. Contact with other metals could lead to heating, bursting or
re. Bring the insulated battery to a technical service centre with an
authorised reseller for disposal. Alternatively, dispose of the battery
according to local laws.
• Turn o the power switch during transportation.

8
3.1 Main parts
An overview of the main parts can be found in Figure 1 and Table 3.
Figure 1 - Main parts
No. Description
1 Blaupunkt Bluebot XSMART
robot vacuum cleaner
2 HEPA lter (is installed in part 1)
3 Dust bin with brush (is installed
in part 1)
4 Primary lter (is installed in
part 3)
5 Brush suction nozzle (is
installed in part 1)
6 Normal suction nozzle
7 Remote control + 2 batteries
8 Power adapter
9 4x Side brushes (indicated
L=left, R=right)
10 Magnetic strip (1 m)
11 Mopping pad
12 Water tank
13 Charging station
Table 3 - Main parts
3. GENERAL PRODUCT DESCRIPTION
13
12
11
10
9
8
7
6
5
1 2 43
2×
4× 2×

9
EN
3.2 Dierent cleaning kits for dierent cleaning purposes
The robot comes with cleaning kits for dierent cleaning purposes.
See Table 4 :
Cleaning purpose Floor type (examples) Cleaning kits
dry cleaning carpets (< 2cm) normal suction nozzle
dry cleaning laminate ooring brush suction nozzle
wet cleaning laminate ooring and tiles oors mopping kit
Table 4 - Selecting the suitable cleaning kit
See section 5.3 for instructions about installation of the correct cleaning kit.
3.3 Cleaning modes
The robot has ve Cleaning modes.
• Auto Cleaning mode:
The robot will rst start mapping the area by cleaning the edges of the
area. When mapping is complete, the robot will start cleaning the area
by zigzag movements. When nished, the robot will return to the
charging station.
• Edge Cleaning mode:
The robot will only clean the edges of the area. When nished, the robot
will return to the charging station.
• Area Cleaning mode:
The robot will clean an area of 2 m² using maximum suction. Place the
robot on the desired area. When nished, the robot will stop automatically.
• Random Cleaning mode:
The robot will clean the area by random movements. The robot is not
able to map the area. When the battery is almost empty, the robot will
return to the charging station.
• Intensive Cleaning mode:
The robot will rst start mapping the area by cleaning the edges. When
mapping is complete, the robot will start cleaning the area by zigzag
movements. The robot will then clean the area a second time. When
nished, the robot will return to the charging station.
Sections 6.2 and 6.3 describe how to select and run the various Cleaning
modes.

10
The robot has three control types. The robot can be operated using the:
• LED panel
• remote control
• BluebotXS app
This section gives a general description of the four control types.
4.1 LED panel
Figure 2 and Table 5 describe the items on the LED panel.
Figure 2 - The LED panel
No. Description
1 Display: Shows time, date, modes and information.
2 Power: Power the robot on or o, start the robot in Auto Cleaning mode.
3 HOME:
• Press this button and the robot will start automatic charging.
• In Clock mode: Increase the time or scheduling of the clean.
4 Max Cleaning:
• Enhance the suction power.
• In Clock mode: Decrease the time or scheduling of the clean.
5 PLAN: Schedule a cleaning cycle.
6 Edge Cleaning mode: the robot will start cleaning along the walls and will
clean only edges and corners of the area.
Table 5 - Description of the LED panel
4. GENERAL DESCRIPTION OF THE CONTROL TYPES
1
3 4 5 6
2