Blaupunkt BT026 User manual

BT026 User’s Manual
PRECAUTIONS
1. Please store and use this product at the ambient temperature;
2. Do not expose this product to the rain or damp surroundings;
3. Prevent this product from falling that could result in serious damage;
4. Do not dismantle, repair or modify this product on your own;
5. In order to avoid any risk, do not dispose this product inappropriately or toss it into the fire as there is
a built-in lithium battery.
CONSIDERATE HINTS
1. Do not turn up the volume to a fair high level constantly as this could shorten the service life of this
product or impair your hearing;
2. When encountering any fault during operation, please cut off the power supply and disconnect the
USB cable to prevent further damage to the speaker or other components;
3. The Bluetooth transmission range or connectivity could be affected by low battery power. In that case,
please recharge immediately.
OVERVIEW
Multifunctional Control Button
Aux Input
Indicator
Micro USB

Power on or Power off
Play/Pause
Hands-free call control button
select last track /Volume down
select next track/Volume u
Scene Lamp Switch
Increase lightness
decrease lightness
BLUETOOTH OPERATION
1. Press for 3 seconds to turn on the speaker. The indicator light will flash to detect Bluetooth enabled
devices near you. The indicator light will go off if no Bluetooth device is detected within 5 minutes.
2. Pair the speaker with the desired Bluetooth device.
3. Press to play/pause. Press shortly to increase the volume, press shortly to decrease the
volume. Press and hold shortly to select last track. Press and hold shortly to select next track
4. When you want to play music from another Bluetooth device, press to disconnect the speaker and
restart the Bluetooth speaker and re-pair.
SPEAKER PHONE OPERATION
Press to answer an incoming call; press to hang up.
Keep pessing to reject an incoming call.
Double click to redial the last phone number.
AUX PLAYBACK OPERATION
1. Turn on the speaker.
2. Insert an 3.5mm audio cable into the aux jack, connecting to any audio device such as mobile phones
or computers with the other end of the cable.
3. Play/pause as desired by pressing ，control the volume by pressing or
CHARGING THE SPEAKER
The speaker has a built-in Lithium battery. The battery is rechargeable and provides approx 4 hours
continuous operation when fully charged.
Use the micro-USB cable to charge the speaker. The red indicator light will glister. The red indicator light
will go off when the speaker is fully charged.
Scen Light
Press to turn on the scene light,press and to adjust the lightness.

SPECIFICATION
Product Model：BT026
Bluetooth Specifications：Bluetooth V4.0
Transmission Distance：ч10M (depending upon operation environment and devices to which it connects)
USB Recharge Voltage: DC 5V--1000mA
Frequency Response: 90Hz-20KHz
Sensitivity: 80db±2db
Signal to Noise Ratio (SNR):ш80dB
Accessories
Speaker*1
Micro USB charging cable * 1
Manual *1
COMPATIBILITY
Device equipped with BLUETOOTH 4.0 or higher version (for details please refer to the relevant
agreements, general specification), such as the IPAD, IPHONE (the second generation and IPHONE with
updated IPHONE 3.1 software), IPOD TOUCH, MAC with Bluetooth, and most of smart phone or
computer support Bluetooth.
Bluetooth 4.0 including agreements as：A2DP, AVRCP, HFP
Trouble shooting
Faults Phenomena Solutions
Unable to pair up with other
devices
1.Check if the speaker is still in the process of search or switch it off and then
on.
2.There are too many enabled Bluetooth devices within 10 metres circle that
cause difficulty in connection. If so, please turn these Bluetooth devices off.
The sound is rather low or
distorted
1.Check the Bluetooth device’s volume and then adjust it to a proper level.
2.Recharge the battery
The music stops from time to
time
Check whether the speaker’s effective transmission range is exceeded or
there is an obstacle between the speaker and enabled Bluetooth device.
The Bluetooth indicator
remains off
1.It suggests the battery power drops quite low and retry once being
recharged.
2. Turn it on again.

Warning
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment .
This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.