Blendtec NITRO Blending Systems 2.0 User manual

Solo® Ultra Clear™ Cups
TP12S 12 oz. Squat PET Cup
TP16D 16 oz. Practical-fill PET Cup
TD24 24 oz. PET Cup
TC32 32 oz. PET Cup
Item Description
Suggested cups for use with Nitro Blending System™
For warranty information go to www.blendtec.com
QSG-NBS-02 Rev. 01
USE OF STEALTH 895 NBS™
Press the power icon to turn on the blender
Raise the sound enclosure lid
Place the assembled Nitro Blending System on the motor
base, ensuring the micronizer is completely sealed
Close the sound enclosure lid
On the control surface, press the desired blend cycle
number or pulse icon
To stop a blend cycle before the programmed time elapses,
press the cancel/exit icon
1.
2.
3.
4.
5.
6.
41-021-01
41-021-02
41-021-03
41-021-04
Adapter PN:
Power
Nitro Blend
Cycles
Small Margarita
Ice Cappuccino
Medium
Smoothie Small
Milkshake
Granita
Medium Milkshake
Manual
Pulse
Cancel/Exit
Model 41-502 For use with Blendtec Stealth 895 NBS™ model CQB2 Blenders
QSG-NBS-02, A02 Quick Start Guide, Stealth NBS2, US ENG

For a full list of compatible cups or more Blendtec Nitro Blending System™ tips and recipes,
go to www.blendtec.com/use-and-care.
*
USE OF ADAPTERS AND MICRONIZER
• To clean the Nitro Blending System, wash pieces separately in the
dishwasher (top rack only, do not use heat cycle) or by hand. For a
more thorough cleaning, remove the red silicone gasket from the
micronizer assembly and wash separately.
CLEAN
7.
• Lift cup out of stand.
REMOVE BLENDED DRINK AND SERVE
6.
• Add toppings or a lid to the disposable cup and serve.
• Flip the stand and micronizer assembly right-side up
and twist to remove micronizer.
LIFT MICRONIZER ASSEMBLY OFF MOTOR BASE
5.
• Flip stand with micronizer and place on motor base.
• Select preprogrammed cycle or blend on medium to
high speed until desired texture is achieved.
PLACE ON MOTOR BASE AND BLEND
4.
• First add solids / frozen ingredients / ice.
ADD INGREDIENTS AND PLACE CUP IN STAND
2.
• Next add fresh fruits / veggies / greens.
• Finish off with liquids and place cup in stand.
• Snap adapter into stand.
• Choose cup and matching adapter.
SELECT CUP* AND ADAPTER
1.
ATTACH MICRONIZER AND LOCK INTO PLACE
• Twist micronizer onto stand until tight.
3.
adapter
stand
micronizer
motor base
cup
Model 41-502 For use with Blendtec Stealth 895 NBS™ model CQB2 Blenders
QSG-NBS-02, A02 Quick Start Guide, Stealth NBS2, US ENG