Kenwood BLP31 User manual

English 2 - 12
´¸∂w
٢٢ - ١٣
instructions
TYPE BLP31
Kenwood Ltd
New Lane
Havant
Hampshire
PO9 2NH
kenwoodworld.com
© Copyright 2019 Kenwood Limited. All rights reserved 142223/1
6
7
8
5
4
3
2
1
9
10
11
12
13
1
2
3
17
18
19
20
14
16
15
Plastic Glass
C
A B
DE
G
F

Safety
lRead these safety instructions carefully
and retain for future reference.
lRemove all packaging and any labels.
lIf the plug or cord is damaged it must,
for safety reasons, be replaced by
Kenwood or an authorised Kenwood
repairer in order to avoid a hazard.
l DO NOT process hot ingredients.
l SCALD RISK: Hot ingredients must be
allowed to cool to room temperature
before placing in the goblet/bottle/mill
or before blending.
lDo not operate your appliance for
longer than the times specified below
without a rest period. Processing
continuously for longer periods can
damage your appliance.
Function/
Attachment
Maximum
Operation
Time
Rest Period
Between
Operations
Blender/
Blend-
Xtract
60 secs
Unplug the
appliance
and allow to
cool down for
15 minutes
Multi mill 60 secs
Grinding
Mill
60 secs
Grating Mill 60 secs
lSwitch off and unplug before fitting or
removing parts, when not is use and
before cleaning.
lNever fit the blade unit to the power unit
without the blender goblet/bottle or mill
jar fitted.
2
6
7
8
5
4
3
2
1
9
10
11
12
13
1
2
3
17
18
19
20
14
16
15
Plastic Glass
C
A B
D
E
G
F
6
7
8
5
4
3
2
1
9
10
11
12
13
1
2
3
17
18
19
20
14
16
15
Plastic Glass
CA B D
E
G
F

3
lAlways unplug the appliance before
putting your hands or utensils in the
goblet.
lAlways take care when handling the
blade assembly and avoid touching
the cutting edge of the blades when
cleaning.
lOnly operate the blender with the lid in
place.
lOnly use the goblet/bottle with the
blade assembly supplied.
lNever let the power unit, cord or plug
get wet.
lNever use a damaged appliance. Get it
checked or repaired: see ‘Service and
Customer Care’.
lNever use an unauthorised attachment.
lNever leave the appliance unattended
when it is operating.
lWhen removing the blender or mill
from the power unit:
wait until the blades have completely
stopped;
do not accidentally unscrew the
goblet/bottle or mill jar/lid from the
blade assembly.
lNever run the blender empty.
lNever blend more than the maximum
capacity stated in the Recommended
Usage guide.
lSmoothie recipes - never blend frozen
ingredients that have formed a solid
mass during freezing, break it up
before adding to the goblet/bottle.
lDo not process hard spices such
as dried Turmeric root as they may

4
damage the blade. Nutmeg should only
be proceed in the grating mill.
lDo not use the blender as a storage
container. Keep it empty before and
after use.
lAlways use the blender on a secure,
dry level surface.
lNever place this appliance on or near
a hot gas or electric burner or where it
could touch a heated appliance.
lMisuse of your blender can result in
injury.
lThis appliance shall not be used by
children. Keep the appliance and its
cord out of reach of children.
lChildren shall not play with the
appliance.
lAppliances can be used by persons
with reduced physical, sensory
or mental capabilities or lack of
experience and knowledge if they have
been given supervision or instruction
concerning use of the appliance in a
safe way and if they understand the
hazards involved.
lOnly use the appliance for its intended
domestic use. Kenwood will not accept
any liability if the appliance is subject
to improper use, or failure to comply
with these instructions.
Blend-Xtract 2GO
l Never drink any hot liquids from the
bottle.
l Do not blend frozen ingredients or ice
cubes without liquid.

5
l Never blend dry ingredients (e.g.
spices, nuts) or run the Blender empty.
Before plugging in
lMake sure your electricity supply is the same as the one shown on
the underside of your appliance.
Important - Plug and Fuse Information
lThe wires in the cord are coloured as follows:
Blue = Neutral
Brown = Live.
lIf the plug supplied with your appliance has a fuse fitted it is rated
3A. If the fuse fails it must be replaced with one of the same rating.
Note:
lFor non-rewireable plugs the fuse cover MUST be refitted when
replacing the fuse. If the fuse cover is lost then the plug must not
be used until a replacement can be obtained. The correct fuse
cover is identified by colour and a replacement may be obtained
from your Kenwood Authorised Repairer (see Service).
lIf a non-rewireable plug is cut off it must be DESTROYED
IMMEDIATELY. An electric shock hazard may arise if an unwanted
non-rewireable plug is inadvertently inserted into a 13A socket
outlet.
l This appliance conforms to EC Regulation 1935/2004 on materials
and articles intended to come into contact with food.
Before using for the first time
l Wash the parts: see ‘Care and
cleaning’.
Key
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Plastic Blender
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Drip feed
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Locking lid with pouring
slots
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Goblet
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Glass blender
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Filler cap
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Push on lid
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Goblet
Blenders
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Blender sealing ring
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Blender blade unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Power unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Speed + Pulse control
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Cord storage
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Blend-Xtract 2GO (if
supplied)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Dispensing lid
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Bottle
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Sealing ring
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Blade unit
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Base
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Multi mill (if supplied)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Multi mill jar
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Multi mill sealing ring
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Multi mill blade unit
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Grinding mill (if supplied)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Mill lid
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Grinding mill blade assembly
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Grating mill (if supplied)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Mill lid
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
Grating mill blade assembly

6
To Use Your Blender
Refer to Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
&
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Use your blender for soups,
drinks, pâtés, mayonnaise,
breadcrumbs, biscuit crumbs,
chopping nuts and crushing ice.
1 Fit the blender sealing ring
into the blender blade unit -
ensuring the seal is located
correctly in the grooved area.
lLeaking will occur if the seal is
damaged or incorrectly fitted.
2 Screw the blade assembly onto
the goblet - ensuring the blade
assembly is fully tightened.
Refer to the graphics on the
underside of the blade unit as
follows:
- open
- close
3 Put your ingredients into the
goblet.
4 Fit the lid
A - Plastic Blender
Turn clockwise to lock
B - Glass Blender
Fit the filler cap to the lid and
push down to secure.
5 Place the blender onto the
power unit and turn clockwise
to lock .
lThe appliance will not work
if the blender is incorrectly
fitted.
6 Select a speed (refer to the
Recommended Usage).
Hints and Tips
lGlass Blender - To blend dry
ingredients - cut into pieces,
remove the filler cap, then
with the machine running,
drop the pieces down one
by one. Keep your hand over
the opening. For best results
empty regularly.
lThe processing of spices is
not recommended as they
may damage the plastic
parts.
lWhen making mayonnaise,
put all the ingredients, except
the oil, into the blender.
Glass Blender - Remove the
filler cap.
Plastic Blender - Pour
through the drip feed in the
lid.
Then, with the appliance
running, add the oil slowly
through the hole in the lid.
lThick mixtures, e.g. pâtés
and dips, may need scraping
down. If the mixture is difficult
to process, add more liquid.
Blend-Xtract 2GO (if
supplied)
Refer to Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
1 Add ingredients to the bottle
up to the 400ml level mark.
lFor best blending
performance always add ice/
frozen ingredients to the
bottle first.
lWhen adding frozen
ingredients (i.e. frozen fruit,
yoghurt, ice cream or ice) do
not blend more than 60g or 3
ice cubes.
lDo not blend frozen
ingredients without liquid.
2 Fit the sealing ring to the
blade unit, ensuring the seal
is located correctly in the
grooved area. Then clip to the
base.

7
lLeaking will occur if the seal
is damaged or incorrectly
fitted.
3 Hold the underside of the
blade unit and lower it onto
the bottle, blades down.
4 Screw the blade assembly
onto the bottle. Refer to the
graphics on the underside of
the blade unit as follows:
- open
- close
lShake to disperse the
ingredients.
lPlace the blender onto the
power unit and turn clockwise
to lock .
5 Select maximum speed. Allow
the ingredients to blend until
smooth.
lOnce your drink has reached
the desired consistency, you
can use the pulse ‘P’ to ensure
all ingredients are thoroughly
blended.
Using the drinking lid
1 Fit and lock the lid by turning
clockwise.
2 When you want to drink,
simply flip open the lid cover.
The drink can be consumed
straight from the bottle.
Hints and Tips
lNote that when the bottle is filled to max capacity (400ml),
this is approximately two servings.
lEnsure your drink is thin enough to be able to drink from the
dispensing lid. To make a thinner drink add more liquid.
lAfter blending, some drinks may not be completely smooth
due to seeds or the fibrous nature of ingredients.
lWhen drinking through the lid, take care that the drink is
smooth and fully processed. Some experimentation may be
necessary when processing firm or unripe ingredient to achieve
the desired result.
lSome drinks may separate on standing, therefore it is best to
drink them straight away or stir before drinking.
lWhen the dispensing lid is fitted always keep the bottle upright.

8
To Use Your Multi
Mill (if supplied)
Refer to Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Use your multi mill for nuts,
coffee beans and purees.
1 Put your ingredients into the jar.
Fill it no more than half full.
2 Fit the multi mill sealing ring
into the multi mill blade unit
- ensuring the seal is located
correctly in the grooved area.
lLeaking will occur if the seal is
damaged or incorrectly fitted.
3 Turn the blade unit upside
down. Lower it into the jar,
blades down. Refer to the
graphics on the underside of
the blade unit as follows:
- open
- close
4 Place the mill onto the power
unit and turn clockwise to
lock.
5 Select a speed or use the
(P) pulse control (refer to
Recommended Usage).
Blender Recommended Usage
Do not operate your appliance for longer than the times specified
below without a rest period. Processing continuously for longer
periods can damage your appliance.
Do not blend more than the maximum capacity stated on the goblet.
Do not fill below the minimum capacity marking on the goblet.
Usage/food items
(Secs)
1Frothing milk 10 - 15 800 ml
Light mixes e.g. batters, milkshakes,
scrambled egg
15 - 30 800 ml
2Soups & drinks
Thicker mixes e.g. pâtés
15 - 30 1 litre
Mayonnaise 30 - 40 2 eggs
+ 300ml
oil
Smoothie drinks
Place the fresh fruit and liquid
ingredients in first (includes yoghurt,
milk and fruit juices).
Then add ice or frozen ingredients
(includes frozen fruit, ice or ice cream)
30 - 60 600ml
liquid
Blend -Xtract2Go
Drinks & Smoothies
For best blending performance always
add ice/frozen ingredients to the bottle
first.
30 - 60 Max qty
400 ml
Max
frozen
qty 60g
(P)
pulse
Operates the motor in a start/stop
action.
The pulse will operate for as long as it is
held in position.
– –
Ice crushing - operate in short bursts
until crushed to the desired consistency.
–6 cubes
(125g)

9
Grinding Mill or
Grating Mill (if supplied)
Grinding Mill - Refer to
Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Suitable for grinding spices,
coffee beans and processing
ginger, coconut, garlic and
chillies.
Grating Mill - Refer to
Illustrations
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
Suitable for grating parmesan
cheese, nutmeg, coconut and
dried fruit.
To Use Your Mill
1 Place your ingredients into the
blade assembly.
2 Fit the lid and turn anti-
clockwise to lock.
3 Place the mill onto the power
unit and lock by turning
clockwise until you hear a
“click”.
4 Select a speed or use the
pulse (P) control (refer to
Recommended usage).
Mill Recommended Usage
Do not operate your appliance for longer than the times
specified below without a rest period. Processing continuously
for longer periods can damage your appliance.
Ingredients Mill
(Secs)
Nuts Multi or Grinding 50g 2 10 – 15
Coffee Beans Multi or Grinding 40g 2 30
Baby Foods &
Purees
Multi 50g 2 30
Spices – such
as black
peppercorns,
cardamom seeds,
cumin seeds,
coriander seeds,
fennel seeds,
whole cloves etc.
Grinding 40g 2 30 – 60
Chillies Grinding 30g 2 10
Fresh Root
Ginger
Grinding 30g 2 10
Garlic Grinding 4 cloves 2 10
Parmesan
Cheese – cut into
1cm cubes
Grating 60g 2 10
Dried Fruit Grating 50g 2 10
Coconut Grating or
Grinding
50g 2 20
Nutmeg Grating 2 2 40

10
Hints and Tips
lFor optimum performance when processing spices we recommend
that you do not process more than 40g at a time in the mill.
lWhole spices retain their flavour for a much longer time than
ground spices so it is best to grind a small quantity fresh at a time
to retain the flavour.
lTo release the maximum flavour and essential oils whole spices are
best roasted prior to milling.
lBaby food/purees - allow cooked food to cool to room
temperature before processing in the mill.
Care and cleaning
Refer to Illustration
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z
for
cleaning information.
lAlways switch off, unplug and
dismantle before cleaning.
lEmpty the goblet before
unscrewing it from the blade
unit.
lDo not immerse the blade unit
in water.
Power unit
lWipe with a damp cloth, then
dry.
lDo not immerse the power unit
in water.
lStore excess cord in the storage
area on the underside of the
power unit.
Blender and Multi Mill blade
assembly
lRemove the blade unit from the
goblet or mill by turning to the
unlock position to release.
Grinding and grating mills
lRemove the lid from the blade
assembly by turning in a
clockwise direction.
1 Blender/multi mill: remove and
wash the sealing ring.
2 Do not touch the sharp blades
– brush them clean using
hot soapy water, then rinse
thoroughly under the tap. Do
not immerse the blade unit in
water.
3 Leave to dry upside down.
Carrot and
Coriander Soup
25g butter
50g onion chopped
1 clove garlic crushed
400g carrot cut into 11⁄2cm cubes
cold chicken stock
10-15ml (2-3tsp) ground coriander
salt and pepper
1 Melt the butter in a pan, add
the onion and garlic and fry
until soft.
2 Place the carrot into the
blender, add the onion and
garlic. Add sufficient stock to
reach the 1000ml level marked
on the goblet. Fit the lid and
filler cap.
3 Blend on maximum speed for
5 seconds for a coarse soup or
longer for a finer result.
4 Season and simmer the soup
for 30-35 minutes or until
cooked. Add extra liquid if
required.