BLK BOX 21-0179-0B User manual

OWNERS MANUAL & QUICK START GUIDE
WALL MOUNTED WEIGHT PLATE STORAGE
NOTE : PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING THIS PRODUCT.
BLK BOX
PRODUCT SPECIFICATION
PRODUCT WEIGHT
DIMENSIONS
-4.2kg
337mm x 300mm x 300mm
-
21-0179-0B
#MADEINBELFAST

WARNING
xx
Nm
SPIRIT LEVEL 10MM MASONRY
DRILL BIT
TOOLS REQUIRED
13MM SPANNER
HAMMER
HAMMER DRILL VACUUM
PARTS & ATTACHMENTS
V
SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE
BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF
INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE EQUIPMENT (PPE).
WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY OF THIS PRODUCT.
EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS AND EAR PLUGS.
PLEASE BE AWARE OF THIS SYMBOL AS AN INDICATION TO CHECK THAT A PART IS LEVEL
OR PLUMB.
THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH
BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON
THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL.
#MADEINBELFAST
No. Name SKU QTY
1X-HORN 21-00247-0A 1
2M10X80 SLEEVE
ANCHOR
10-0031 4
3M10 FLAT
WASHER
10-0016 4
1
2
3

#MADEINBELFAST
INSTALLATION
1
MEASURE, MARK AND DRILL HOLES USING GUIDES PROVIDED.
-DRILL 10MM HOLE INTO THE WALL, 90MM DEEP
-VACUUM OUT THE DUST.
300mm
520mm
800mm
1,020mm
1,300mm
1,520mm
CENTER LINE
110mm 110mm
DRILL HOLE VACUUM
90MM
SLEEVE ANCHOR BOLT FITTING

#MADEINBELFAST
190mm
410mm
600mm
820mm
1,100mm
1,320mm
CENTER LINE
1,600mm
1,820mm
110mm 110mm

#MADEINBELFAST#MADEINBELFAST
2
30
Nm
x4
ATTACH X-HORN TO THE WALL USING BOLTS AS SHOWN. TIGHTEN ALL BOLTS TO SPECIFIED
TORQUE.
-HAMMER SLEEVE ANCHOR
INTO THE HOLE.
-TIGHTEN SLEEVE ANCHOR
TO SPECIFIED TORQUE
USING 13MM SPANNER.
30
Nm
HAMMER IN
BOLT TIGHTEN
SLEEVE ANCHOR BOLT FITTING

1:1 SCALE FASTENERS
FOR TERMS AND CONDITIONS VISIT OUR WEBSITE AT
www.blkboxfitness.com/pages/terms-conditions
GET IN TOUCH
TEL: [phone]
EMAIL: [e-mail]
DISCOVER MORE AT:
www.blkboxfitness.com
M10x80 SLEEVE ANCHOR
10-0031
M10 FLAT WASHER
10-0019
#MADEINBELFAST

THIS IS A BLANK PAGE
#MADEINBELFAST