BLK BOX 21-0741 User manual

OWNERS MANUAL & QUICK START GUIDE
BLACKOUT FREE STANDING POWER RACK
NOTE : PLEASE READ ALL THE INSTRUCTIONS
CAREFULLY BEFORE ASSEMBLING THIS PRODUCT.
BLK BOX
PRODUCT SPECIFICATION
21-0741
#MADEINBELFAST
105kg
PRODUCT WEIGHT
MAX USER WEIGHT
MAX USER
MAX TRAINING WEIGHT
DIMENSIONS
SAFE WORKING ZONE
-125kg
300kg
1612mm x 2260mm x 1123mm
-
-
-
-2000mm x 2400mm x 2700mm
1
-

WARNING
TOOLS REQUIRED
17MM SPANNER X2 STEP LADDER
PARTS & ATTACHMENTS
No. Name SKU QTY
1 2.2 BLACKOUT FSPOWER RACK UPRIGHT 21-0740 4
2 BLACKOUT FS POWER RACK BASE 21-0742 2
3 1.2 SINGLE BAR CM DNA60 21-0015 1
4 1.2 BOX CM DNA60 21-0013 3
5 BLACKOUT BRACE PLATE 21-0472 8
6 J-HOOK PAIR 16-0001 1
7 M10X90 BOLT 10-0008 32
8 M10 FLAT WASHER 10-0019 64
9 M10 NYLOCK NUT 10-0024 32
1
2
3
4
7
89
SERIOUS OR FATAL INJURIES MAY OCCUR FROM INCORRECTLY ASSEMBLED EQUIPMENT. ALWAYS ENSURE
BOLTS ARE TIGHTENED CORRECTLY AND ALL PARTS ARE LEVEL AND PLUMB. TO FURTHER REDUCE RISK OF
INJURIES OR DEATH PLEASE USE OUR SUGGESTED TOOLS AND PERSONAL PROTECTIVE EQUIPMENT (PPE).
WE SUGGEST THAT A MINIMUM OF THREE PEOPLE ARE INVOLVED IN THE ASSEMBLY OF THIS PRODUCT.
EACH PERSON SHOULD BE EQUIPPED WITH SAFETY GLASSES, STEEL TOE CAP BOOTS AND EAR PLUGS.
PLEASE BE AWARE OF THIS SYMBOL AS AN INDICATION TO CHECK THAT A PART IS LEVEL
OR PLUMB.
THIS SYMBOL IS AN INDICATION OF THE RECOMMENDED TORQUE EACH
BOLT SHOULD BE TIGHTENED TO. THIS VALUE WILL BE DEPENDENT ON
THE BOLT TYPE. PLEASE HAND TIGHTEN ALL BOLTS UNTIL YOU SEE THIS SYMBOL.
#MADEINBELFAST
6
xx
Nm
5

ASSEMBLY
1
INSERT 2QTY UPRIGHT (21-0740) INTO SLOTS IN 1QTY POWER RACK BASE (21-0742) PLACE
1QTY BRACE PLATE EITHER SIDE OF EACH UPRIGHT ATTACH WITH BOLT ASSEMBLY AS
SHOWN. BOLT 1QTY 1.2 BOX CM (21-0013) TO 2QTY UPRIGHT (21-0740) WITH BOLT ASSEMBLY
SHOWN.
REPEAT ABOVE STEP.
#MADEINBELFAST
10.0008
10.0019 x2
10.0024
10.0008
10.0019 x2
10.0024

2
BOLT 1QTY 1.2 BOX CM (21-0013) TO 2QTY BACK UPRIGHT (21-0740) WITH BOLT ASSEMBLY AS SHOWN.
BOLT 1QTY 1.2 SINGLE BAR (21-0015) TO 2QTY FRONT UPRIGHT (21-0740) WITH BOLT ASSEMBLY AS
SHOWN.
ENSURE THAT ALL BLK BOX LOGOS ARE FACING OUTWARDS AND BOLTS ARE FACING INWARDS.
PLACE J-HOOKS AS SUITS.
#MADEINBELFAST
10.0008
10.0019 x2
10.0024