Blodgett Pitco B16-PF45 User manual

BLODGETT
www.blodgett.com
1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA
Phone: [phone] • Fax: [phone]
SPECIFY
Gas Type Natural Gas Propane
Manifold Front (1-1/4”) Rear (1”)
Flue Riser Height 24” (option) 36” (option)
Range Depth Standard Deep (option)
Position in Battery Left End Right End Not at End
Operating altitude (if above 2000 ft (700 meters) _____________________
Blodgett can often accommodate special or custom requirements. Contact
your Blodgett representative.
STANDARD CONSTRUCTION (All models)
Frypot: 16 gauge, type 430 #3 welded tank with extra smooth peened finish
ensures easy cleaning. Long-lasting, high temperature alloy stainless steel
heat baffles are mounted in the heat exchanger tubes to provide maximum
heating and combustion efficiency. Front access, quick opening 1-1/4” drain
valve
Gas Control System: Includes manual shut-off, 100% safety shut-off pilot gas
filter, pilot adjustment and 200° to 400° adjustable thermostat. High limit control
automatically shuts down main burner and pilot if oil temperature exceeds 475°F.
STANDARD FEATURES (All models)
New Pitco Solstice burner/baffle design increases cooking production, lowers
flue temperature, improves working environment and generates more produc-
tion per BTU
Quick recovery is provided to eliminate waiting between loads
Available in 45lb and 65lb capacity
9” front rail to match sectional range
Stainless steel tank and cabinet
Two twin plated, mesh fry baskets with plastic coated, heat resistant handles
Wide spacing tube frypot allows more heat to be transferred to oil and easy
cleaning
1-1/4” full port drain valve helps eliminate clogging
Large cold zone captures food particles, reduces flavor transfer and extends
oil life
Single unit combination gas shut-off, pressure regulator and pilot ignition sys-
tem
6” adjustable legs front, 6” fixed casters rear
100% safety shut off
Warranty: two year parts and labor from date of purchase
OPTIONS AND ACCESSORIES
(AT ADDITIONAL CHARGE)
Flue riser
24”
36”
Baskets
Extra single basket (full size) for 14” pot
Extra twin size basket for 14” pot
Fryer filter system
Stainless steel frypot cover
Stainless steel sides
Stainless steel divider
Heat lamp over drain cabinet
Cable restraint kit
B16-PF45 and B20-PF65
Deep Sectional Fryers
MODELS B16-PF45 and B20-PF65
Project
Item No.
Quantity
Model B16-PF45 (16” wide, 45 pound capacity)
Model B20-PF65 (20” wide, 65 pound capacity)
The Blodgett Sectional Deep Fryers are available with two riser heights. An
optional rearward-extending flue riser is available to increase the overall
depth to match a deep battery. Battery-design assistance is available!
by
OPTIONAL OIL FILTRATION.
Simple two step operation: Step 1, open blue handle
valve to drain oil into filter pan. Step 2, open red handle
valve to return oil from filter to fryer.
Self-aligning filter piping makes it easy to assemble and
disassemble
Larger 3” (7.6 cm) drain line allows for faster draining
without clogging
Light weight, removable filter pickup assembly, with built-
in handle, for fast media cleaning under busy conditions
High flow pump and large return lines produce faster oil
refill times
Large filter media collects more debris, which extends
time between changes.
B16-PF45 shown

BLODGETT
www.blodgett.com
1100 Old Honeycutt Road Fuquay-Varina, NC 27526 USA
Phone: [phone] • Fax: [phone]
MODELS B16-PF45 AND B20-PF65
SHORT FORM SPECIFICATIONS
The item shall be a sectional fryer with a stainless steel frypot and cabinet. The frypot shall have a large cold zone, and hanve widely spaced tubes to enable easy cleaning. The item
shall have a pilot ignition system and a 100% safety shutoff.
Printed in U.S.A. NOTE: FOR COMMERCIAL USE ONLY
NOTE: The company reserves the right to make substitutions of components without prior notice
Dimensions are in inches and (millimeters)
SHIPPING CRATE DIMENSIONS & WEIGHT
(Door entry clearance when uncrated is
16.5” for model B16-PF45 and 20.5” for model B20-PF65)
Model Width Height Depth Volume Weight
B16-PF45 20.0
(508)
45.0
(1143)
42.5
(1080)
22.1 cu ft
(0.63 cu m)
210 lbs
(95 kg)
B20-PF65 23.0
(584)
41.0
(1041)
43.0
(1092)
23.5 cu ft
(0.66 cu m)
265 lbs
(120 kg)
31-3/4”
(808)
2” (51)
16” (406) 20” (508)
5-1/2”
(140)
7”
(178)
2-3/4” (70) 2-3/4” (70)
(Location of Optional Rear Gas Connection)
Model B16-PF45 Model B20-PF65
TOP VIEWS
Model B16-PF45 Model B20-PF65
FRONT VIEWS
36” Flue Riser
24” Flue Riser
36”
(914)
30”
(762)
6” (152)
60”
(1524)
72”
(1829)
SIDE VIEW
9” (178)
33-3/4”
(859)
4-1/2” (114)
Front Gas
Manifold
43-3/4” (1112)
40” (1017)
37-3/4” (960)
34” (864)
0(0)
Flue riser for “deep” depth-option extends rearward 6”
(frypot size is the same as for “standard” depth)
APPROVAL/STAMP
P/N BR00042 Rev A (2/08)
OTHER TECHNICAL INFORMATION
If casters are used with flex hose, a restraining device should be used to eliminate undue strain on the flex hose.
Minimum clearance from non-combustible construction is zero. Minimum clearance from combustible construction is 10” on sides and 6” on rear.
Check local codes for fire and sanitary regulations.
UTILITY INFORMATION GAS: Each unit has a 1-1/4" front gas manifold that couples to the adjacent sectional unit(s), and can be ordered with a 1" rear
gas connection with a male NPT connector. Minimum supply pressure is 7" W.C. for natural gas, 11" W.C. for propane. All sec-
tional units require a regulated gas supply; pressure regulator to be ordered separately. If using a flexible-hose gas connection, the
I.D. of the hose must not be smaller than the connector on the unit and must comply with ANSI Z21.69. Provide an adequate
means of restraint to prevent undue strain on the gas connection.
FLUE EXHAUST: Installation under a vented hood is recommended.
MODEL
GAS (BTU/hr)
Natural Gas Propane
B16-PF45 110,000 110,000
B16-PF65 150,000 150,000