Wells F-85 Configuration guide

WELLS
R A I S I N G T H E S T A N D A R D
F-85 FRYER
F-85 FRYER
I T E M N O .
WE L L S M A N U F A C T U R I N G
Specifications
Overall Dimensions: Inches MM
Width 24 13/16 630
Depth 23 9/16 598
Height (incl. 4” legs) 16 3/8 416
Shortening Capacity:
per frypot Lbs. KG
F-85 15 7
Temperature Range: Fahrenheit Celsius
F-85 275º to 375º 135º to 191º
Pre-Heat Time to 350ºF: 5 minutes
Watts Per Hour to Maintain 350º F: 450
Typical Production: Per Hour
French Fries
2-oz. servings 600
Chicken
pounds 40
Weights: Lbs. KG
Installed 66 30
Shipping 77 35
Wells F-85 Fryer is one of the most durable and
easy-to-use fryers in the industry. Fry two different
products at the same time using the two separate
frypots. The unique STS (Safety Test System) can be
used to periodically check the temperature-limiting
thermostat control system.
Accessories / Options
Basket, half-size (2 per fry pot), 20161
Basket, full size (1 per fry pot), 20162
Crumb Cradle, 20690
Fry Pot Cover, 21010
Legs, set of four, metal, 4” adjustable, 20563
Export
The following model is available for export
and meets the standards for CE:
• F-85EU, 380-415V, 3Ø, 5800 watts
Features
• Two full-size, rear-hanging, interchangeable fry
baskets are included with every fryer and allow for
product versatility.
• Swing-up elements, located below the baskets,
allow for easy removal of the frypots for cleaning.
Elements are heavy-duty stainless steel with a low
watt density for longer oil life.
• Element control housing has a spring-loaded
support rod to secure elements when in a
raised position.
• Positive-off thermostats control the elements
allowing for adjustable and more consistent
temperatures. A signal light indicates that the
heating element is energized.
• Two deep-drawn, removable frypots are made
of nickel-plated steel and can hold up to fifteen
pounds of oil each, allowing frying flexibility.
• A manual reset safety thermostat will shut off
the heating element power and illuminate the signal
light if an over-temperature condition is reached.
• Unit is furnished with a Safety Test System
(STS) to enable periodic checks of the
temperature-limiting thermostat.
• A terminal block is provided for connection to
the main power supply and an auxiliary terminal
block allows for connection to an external flame
sensor fire suppression system.
• The F-85 Fryer is Underwriters Laboratories,
Inc. LISTED and meets NSF International
and Canadian standards.
• A one-year warranty against defects
covers parts and labor.
F-85

WELLS
ONLY
MODELS
EXPORT
LISTED
R
E6070
R
STD.4
R
LR 10836
(305)
12
(648)
25 1/2
(630)
24 13/16
(598)
23 9/16
(102)
4
(213)
8 3/8
(102)
4
MODELS VOLTS WATTS AMPS PER LINE PHASE 3 AMPS POWER
SINGLE PHASE SUPPLY CORD
L1 L2 L3
F - 8 5 E L E C T R I C A L S P E C I F I C AT I O N S :
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone] • www.wellsbloomfield.com
© 2001 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 2/01 • REV(J) • PART NO. 37067
MODEL
F-85
F R Y E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
MINIMUM CLEARANCE REQUIRED FROM UNIT
TO THE NEAREST COMBUSTIBLE OBJECT
BACK SIDE BOTTOM TOP
NA NA NA 40
NA NA NA (1016)
NOTE: Specifications are subject to change without notice.
F-85 208 11500 31.9 31.9 31.9 — NONE
F-85 240 11500 27.6 27.6 27.6 47.9 NONE
F-85 480 11500 13.8 13.8 13.8 24.0 NONE
F-85EU 380-415 11100 16.0 16.0 16.0 – NONE
Denotes export (EU) products.