Blossom Smart Watering Controller User manual

Quick Start Guide

hello.
welcome
to smart
watering.

Introduction04

i’m your yard’s
new brain.
let’s get started.
myblossom.com

what’s in
the box.
What you will need:
• iOS or Android Device
• Internet Router and Service
Blossom Controller
Blossom Bracket
Four Wall Screws
Ethernet Cord
Blossom Bridge
1
2
3
4
5
Contents06

1
3
54
2
myblossom.com

Quick Start Guide
1connect the
ethernet cable.

the provided Ethernet cable into the


open port on your router.
08

myblossom.com

Quick Start Guide
2plug in the Blossom Bridge.
Power up by plugging the Blossom
Bridge into an electrical outlet near
your internet router.
10
Note: Make sure the Bridge is plugged
in directly into a power socket. Avoid
any power protection strip. You should
see a green light once you connect it.

myblossom.com

Quick Start Guide
3label and disconnect

controller.
It is important




same valve numbers you can use the
orange stickers.
12
Quick Tip


myblossom.com

Quick Start Guide
4remove the old
controller.

new. Dismount your old watering

14

myblossom.com

Quick Start Guide
5install the
Blossom Bracket.
Mount the Blossom Bracket

provided screws.
16

myblossom.com

Quick Start Guide
6connect





18
Note: Discard your existing weather
sensors. You won’t need them. Blossom
uses real-time weather data.

myblossom.com

Quick Start Guide
7get the pairing code and mount

between the Bracket and the

 and secure it to the
Blossom Bracket on the wall.
20
Quick Tip: Snap a photo or write down

