Blossom LED M2 2136 User manual

LED M2 2136/LED M2 2436/LED M2 3036/LED M2 3636/LED M2 4836
LED M2 2136/LED M2 2436/LED M2 3036/LED M2 3636/LED M2 4836

LED M2 2136/LED M2 2436/LED M2 3036/LED M2 3636/LED M2 4836
LED M2 2136/LED M2 2436/LED M2 3036/LED M2 3636/LED M2 4836
SCREW
(x2)
WALL PLUG
(x2)
WIRE CONNECTOR
(x2)
Electrical Drill 1/8” Drill Bit Pencil Phillips
Screwdriver Tape Measure Level

LED M2 2136/LED M2 2436/LED M2 3036/LED M2 3636/LED M2 4836
LED M2 2136/LED M2 2436/LED M2 3036/LED M2 3636/LED M2 4836
Live / Black
Field Wire
Ground / Green
Neutral / White
Neutral to white
Live to black
Ground to green.
• 5mm copper free silver mirror
• High output LED lighting:
CRI 90+, 2700-6400K CCT, IP44
• Colour changing and dimmable touch
switch for surface LED
• Vertical and horizontal mount options
• Defogger

LED M2 2136/LED M2 2436/LED M2 3036/LED M2 3636/LED M2 4836
PLACEMENT
Select the desired position of the mirror.
Level and mark the location.
SUPPORT LOCATION
Measure the center of the holes and mark the
drilling locations ensure marking are leveled.
A
B
C
2 - 3mm
INSTALL SCREWS
screw and the wall.
PLACEMENT
Place the mirror against the wall and slide down as
shown in image B.
A
A
A
A
B
A
B

Touch to turn the task light and defogger on or off.
Press and hold to change the colour temprature of task light.
Press and hold to dim or brighten the task light.
[email protected]
www.BlossomUS.com
Please visit our website for more information.