Living Spaces 4686 User manual

MAS90: 5043-43300
MIRROR KIT
QTY: DESCRIPTION:
6 8 X 1-1/4 PH PAN ZINC
7030-00270 KIT
PARTS LIST:
A) 1 -Mirror
B) 2 –Wooden Supports
C) 8 – Zinc Screws
1) Phillips Head Screwdriver
TOOLS REQUIRED:
2 PERSONS AND 30 MINUTES

MIRRORS 7030-00270
7030-01001
_____________________________________________________________________
1)Unattach and then reattach wooden brackets to the placement shown above using the pre-drilled holes in the mirror
support. Use the center holeon the mirror support asa reference; do not usea screw in this hole. Use screws inholes 1
&2 as shown in Detail B
2) Attach the assembled mirror and wooden brackets to case good using hole3 and depending on the case good
purchased using 1 of the 3 holes for hole4 (Dresser, Chest etc.). Todetermine the hole to use push lightly onthe case
backing tofeel the face frame horizontal behind it. When putting in thescrew if you don’t feel it pull together tightly
then remove thescrew and trya different hole.
NOTE: Make sure you have all parts before beginning assembly. If you need a part, contact the dealer where you
purchased your bed.
Detail B Hole 1
Hole 2
Hole 3
Hole 4
ASSEMBLY INSTRUCTIONS:
4686 / 4826