MANCHESTER WOOD SHAKER NESTING COFFEE TABLE TRIO User manual

SHAKER NESTING COFFEE
TABLE TRIO
Thank you for purchasing our Shaker Nesting Coffee
Table Trio. Assembly of this product requires a 7/16”
wrench.
4413

STEP 1
Read through these instructions
thoroughly. We have found this to be of
great value when first assembling this
product.
STEP 2
Remove all parts and hardware from
packing material. Place wooden parts on
non-abrasive surface (like carpet or
carton) to prevent damage to finish.
Identify all parts using diagram at right.
STEP 3
(A) Top - 3
(B) Leg - 12
STEP 4
Identify and count hardware using
diagram at right.
STEP 5
Match shorter legs with smaller tops.
Place Top (A) facedown on a non-
abrasive surface (like carpet or carton).
Align Legs (B) as shown on right with
predrilled hole facing into Top (A).
Match longer legs with bigger top and
apply same steps.
STEP 6
Attach Legs (B) to Tops (A) by threading
lag bolts with a washer through metal
bracket on Tops (A) into the predrilled hole
in the Legs (B). Turn until fully secure with
7/16” wrench.
CARE
Dust as needed with soft cloth. Clean with
damp cloth and mild solution of dish soap.
Polish with soft cloth and polish that
contains no pigment or silicone.
www.manchesterwood.com
Product Support 1-800-660-6930