Blu External User manual

T P M S
Multi Wheel Bluetooth
Tire Pressure Monitoring System
User Manual
Model: External

1
1. PRODUCT INTRODUCTION ........................................................................................... 2
2. NOTICE .................................................................................................................................. 2
3. BLE TPMS SPECIFICATION ........................................................................................... 3
4. BLE TPMS PACKAGE ........................................................................................................ 4
5. BLE TPMS SENSO R INSTALLATION ........................................................................... 4
6. APP DOWNLOAD AND INSTALLATION ...................................................................... 7
7. SETTINGS & ADD DEVICE ............................................................................................... 8
8. ALARMS AND WARNINGS ...............................................................................................16
9. SYSTEM SETT INGS ......................................................................................................... 17
10. FREQUENTLY ASKED QUESTIONS ......................................................................... 24
11. WARRANTY POLICY ..................................................................................................... 24
Table of Contents

2
Tire condition is critical for the safety of riders and drivers, so getting a warning right from your vehicle
that your tires have an issue could be a life saver. The BLU TPMS will monitor both the Pressure and
Temperature of vehicle tires with external (D.I.Y.) IP Addressable O.E.M. Grade, Low Energy Bluetooth
Sensors (BLE). All of this information is then reported in the free App for iOS or Android devices,
including push notifications that tire pressure is low or temp out of parameters, no dedicated display
required.
2.1.1 Do not operate the App while driving. The company is exempt from all responsibilities that
result from driver’s carelessness and improper operation.
2.1.2 The system adopts the wireless transmission of signals. In some special environments, frequency
interference, improper operation or faulty installation may result in weaker signals or inability to receive
signals. If the construction of the windshield contains metallic material, it will affect the signal reception.
When the alarm sounds and shows abnormal data, please drive the vehicle away from the current location
(there may be signal interference in the surroundings) or drive the vehicle to a tire shop to be checked.
2.1.3 If the TPMS sensor is low on battery (if abnormal conditions exist continuously, the battery may
make the TPMS sensors continuously emit signals to warn the driver, so the battery life will be shorter
than expected), please go as soon as possible to a specified service station to confirm whether the TPMS
sensor needs to be replaced.
2.1.4 Temporary resealing or re-inflation of product injected through the valve hole may adversely affect
the operation of the sensor. The company is exempt from all responsibilities. Furthermore, do not place
the TPMS sensor in contact with any chemicals. They might damage the sensor and prevent it from
functioning properly.
2.1.5 Please close any other Apps or web pages which are not in use when using the BLE App. Data
receiving status of the App may be affected by the system load of the smart phone.
2. Notice
Product Warning
1. Product Introduction

3
BLU, BLE Sensor Specification
Operating Voltage 3V
Operating Humidity 95 % MAX
Operating Current ＜15 mA at DC 3V
Storage Temperature -40℃ to 85 ℃
Operating Temperature -20℃ to 85 ℃
Monitored Pressure Range Passenger: 0 to 92 psi (0 to 640 kPa)
Truck: 0 to 185 psi (0 to 1280 kPa)
Monitored Temperature Range -20 ℃ to 85 ℃
Operating Frequency 2.4GHz
Transmission Power 4 dBm MAX
Battery Life 3 years (under normal operating condition)
Battery Capacity 130 mAh (CR1632)
Weight 9.5 g ± 0.5 g (including battery)
Optional Voice Dongle Specifications
Operating Voltage 5V
Operating Humidity 95 % MAX
Operating Current ＜900 mA at DC 5V
Storage Temperature -40℃ to 85 ℃
Operating Temperature -20℃ to 85 ℃
Sound Pressure (min.) 80dB@30cm
Operating Frequency 2.4GHz
Transmission Power 4 dBm MAX
Weight 10 ± 1 g
3. BLE TPMS Specification

4
1.Battery(CR1632) 2.Tire Sensor 3.Anti-theft part 4.Lock-Nut 5. Wrench
Part List:
BLE TPMS Sensor
CR 1632 Battery
Anti-theft lock
Lock-Nut
User Manual
Voice Dongle (Optional)
Wrench
5. BLU TPMS Sensor Installation
4. BLU TPMS Package
5.1 TPMS components and accessories

5.2 Installation Steps
NOTE: We recommend metal valve stems for durability.
5
2
3
1
1
Tire Sensor
(+ side up)

Valve Stem
Lock Nut
After installation, please download the App to your smart phone, and proceed with all settings.
(Please refer to section 7 “Initial Setting”)
6
2
3

7
T P M S
The BLU TPMS system supports both Android & iOS operating systems. (Bluetooth 4.0 required).
Search in the Google Play Store or APPLE App Store by keyword “BLE” or ”TPMS” , in order to
find the free App.( Multi Wheel Bluetooth TPMS App.
6. App Download and Installation
App Download Operating System Compatible Smartphone
APPLE App Store
iOS 7.1.2 or later iPhone 4S, 5, 5S, 6, 6S, Plus or
later
Android Google Play Store Standard Android 4.3 or later Android Smart Phone
iOS version Android version
6.1 Operating System Requirements
6.2 How to Download
After you install the App, please restart the device and make sure Bluetooth is enabled. Open the App
after restart is completed. A statement from the operating system will pop up, displaying “Bluetooth
Service Disabled” and/or “Location Services Disabled”. Please choose “ok” to turn on the
“Bluetooth” & “Location Services” function. In case “Location Services” is not turned on properly,
please turn it on in “Settings” (only for iOS system).

8
T P M S T P M S
Enter email and password if already
set up. If not, click “register” to
begin process.
7. Settings & Add Device
7.1 Intro screen
Please make sure the “Bluetooth” & “Location Service” Settings are enabled when you start the App.
iOS version Android version
Pic 4a
Pic 4b
Login:
Login Page (Pic 4a & 4b).

9
To Register:
Be sure the device is connected to
the internet.
Enter desired email account.
Enter password. Password must be
between 6 and 20 characters,
capital, lower case and numbers.
Once submitted, you will receive an
email to your account with an
activation link. Click the link in the
email to activate the account.
Forgot / Reset password:
To reset your password, please
enter your registered email
address. (Pic 6a/b)
An email will be sent to that email
address.
Enter your password within 1 hour.
Note: If Voice Dongle and TPMS
Sensor have been paired, and
changes are made in the “System
Settings” or “Exchange” tabs
please change the settings in
“Dongle” to match.
iOS version
Android version
Pic 5a
Pic 6a
Pic 5b
Pic 6b

10
iOS version
Android version
Pic 7a
Pic 8a
Pic 7b
Pic 8b
Main Menu:
To add vehicle:
Sign in and open left menu (Pic 7a/b),
click on the upper left corner "+"
button to add a vehicle, select the
vehicle type .(2/3/4/6~36 wheel)
(Pic 8a/b)

11
iOS version Android version
Pic 9a
Pic 10a
Pic 9b
Pic 10b
7.2 Sensor Settings
Sensor Settings:
There are 3 kinds of calibration
between the device and the sensors,
Deflation, Manual, and QR code.
The following describes each
method, you must use one of them
to set up communication between
the device and the sensors.
Deflation set up:
(not applicable for The external
sensors, works only with internal
sensors also available.)
1

12
iOS version Android version
Pic 11a Pic 11b
Pic 12a Pic 12b
Manual set up:
1. Select Manual Learning. (Pic 12a/b)

13
3. Manual learning is now
complete. The ID should show in
the data field for the tire previously
chosen. Repeat process for the
balance of tires.
2. Choose tire “1” and key in the
five character sensor ID (Please
refer to last page: ID sticker),
which might include “0-9”, “A-F”,
or ”a-f”, when a blank space pops
up. (Pic 13a/b) The sensor ID is
also etched on the top of each
sensor.
4. Press and hold on the data field
to clear the existing ID’s.
iOS version Android version
Pic 13a
Pic 14a
Pic 13b
Pic 14b

14
iOS version Android version
Pic 15a
Pic 16a
Pic 15b
Pic 16b
QR Code set up:
Select QR Code Settings. (Pic 15a/b)
Choose tire 1 (LF)
The APP will scan QR code,
showing new ID number on the
data field. (Pic 16a/b) repeat for
balance of sensors.
NOTE: Make sure camera is
properly focused on the top of
the sensor.

15
3. The code will now show in the
data field. Repeat the process for
the remaining wheels.
4. Press and hold the data field to
clear the ID’s if necessary.
iOS version Android version
Pic 17a Pic 17b

16
iOS version Android version
Pic 18a
Pic 19a
Pic 18b
Pic 19b
System Warning：
No signal available for the device (shows in red)
Rapid deflation of tire pressure
High or low pressure warning (based on your settings)
High tire temperature (based on your settings)
Low battery power warning for TPMS sensor
Warnings
Pressure, temperature and
voice warning. (Pic 18a/b)
When abnormal tire system
status occurs, the value of the
corresponding tire turns red,
Shows a warning symbol and
an alarm sounds. The warning
symbols on each tire display
are shown below.
Press mute and turn off voice
reminder to shut off audible
alarm.
This screen supports landscape
mode. (Pic19a/b)
8. Alarms and Warnings

17
9. System Settings
iOS version Android version
Pic 20a Pic 20b
System Settings: (Pic 20a/b)
Warning Audio Settings: Audio
and mute .
Voice reminder: Voice OFF/ON
Vehicle settings: Vehicle edit.(9.1)
Monitored pressure range
settings: Select kPa、psi、Bar、
Kg/cm2 pressure units, ℃,℉,
temperature unit and upper and
lower limits. (9.2)
Sensor settings: Enter the sensor
settings when using for the first
time.(7.2)
Voice dongle settings: Dongle
settings.(9.3)
Exchange settings: Tire exchange
settings. (9.4)
Send default value: Value history
record keeping.
About: Disclaimer & Company
Information.(9.5)
If adjustments are made in“System
Settings” and “Exchange Settings”,
please change the settings in
“Dongle”.

18
iOS version Android version
Pic 21a
Pic 22a
Pic 21b
Pic 22b
System Settings:
1. Select Vehicle Settings,
enter vehicle name、brand、
model. (Pic 21a/b).
2. Select Camera or Photos.
then press the "Back “button to
save the settings.
9.1 Vehicle Settings
(Pic 22a/b)