Blu 700 Series User manual
2020-10
1 866 907 0122 blubathworks.com
51 M2 mirror
Installation Guide
series 600
F51M2-0600 F51M2-0700
series 700 series 900
F51M2-0900
series 1200
F51M2-1200 F51M2-1400
series 1400 series 1800
F51M2-1800
1 866907 0122 blubathworks.com
2020-10
1
Attention- Before Installation
Thank you for choosing from among Blu’s quality line of products. We recommend that you carefully read this installation guide
to ensure your unit’s proper operation and reliability for many years to come.
NOTE:
Adhere to all local building and plumbing codes. The diagrams in this guide are not construction plans. They are visual aids.
Installation Requirements
1. To ensure this product is installed properly, you must read and follow these guidelines.
2. The owner/user of the product must keep this information for future reference.
3. Consult local building codes to make sure the installation complies with standards.
4. Remove the unit from its packaging. Before disposing of it, inspect the unit to make sure its in good shape. Should
esponsibility for shipping damages ceases upon delivery
of the product in good order to the carrier. All complaints regarding damage due to transport must be made directly to the
carrier.
5. Place the unit in the bathroom before you start working. Conserve all nuts and bolts.
6. To protect the unit during installation, we recommend that you lay a piece of cardboard on the bottom.
7.
8. Verify that all dimensions on the plan are the same as the ones of the unit.
Installation Notes
Important! Install this product according to the installation guide.
Tools Required: Materials Included:
Technical Support Assistance
If further assistance is required, please contact:
North America
Blu Bathworks Inc.
7388 Hedley Avenue, Burnaby, BC Canada V5E 2P9
T +1.604.299.0122 F +1.604.299.0125
Please refer to blubathworks.com for warranty, terms & conditions under warranty & procedure for warranty service.
dowel, screw & hanger transformer terminal
phillips screwdriver level drill
A
C
E
D
B
G
12V OUT
110V IN
H
1 866 907 0122 blubathworks.com
2020-10
2
A
B
C
D
E
1
51 M
2 Mirror Installation:
Disconnect electrical power from
the main switchboard
Secure wall hangers as shown above
- At least 2 studs required
- Use (A) in applications with no third stud
2
Secure the rest of the hangers using a level
2A
1 866 907 0122 blubathworks.com
2020-10
3
51 M2 Mirror Installation continued:
Connect cable (1) from the capacitive switch
to the transformer (G) paying attention to the
+and -signs of the two poles
Connect clamp (H) with cable (2) of
transformer (G) and cable (3) of the
household power
5
drawing
6
Install the mirror making sure the wall hangers
are perfectly attached to the mirror back frame
channel
7C
E
In case the mirror is not leveled:
- Remove the mirror carefully
-Adjust mirror inclination with screw (E),
screwed into the lower part of hanger (C)
NOTE: mirror can be mounted
vertically following the instructions
as above.
3
B
cable2
cable1
4
C
cable2 cable3
N
L
Other manuals for 700 Series
1
This manual suits for next models
11
