BLUE BREW BB1008 User manual

• The sealant may be removed from
Stoppers
the glass lid.When replacing the
sealant to the glass lid, place the
stopper side of the lid down and
attach the glass lid.
• The markings on the server
do not show cup quantity.
The markings on the server
are capacity indicators, these
indicators may differ from actual quantity. Use these as
a reference only.
• Always attach and remove the lid on a flat surface.
– To attach the glass lid (with sealant) to the glass
server always place the air hole to the opposite side
of the spout as shown. If not attached correctly the
liquid may be hard to pour or cause spillage.
Air Hole
Spout Spout
HANDLING PRECAUTIONS
• ONLY use a microwave to heat the server. DO NOT use
any other heating equipment.
Microwave ONLY
NO Direct Flames
• Handle glassware with extreme care.
• Keep the glass server away and out of reach of children.
Do not allow children to use the server, it is not a toy.
INSTRUCTION SHEET FOR
GLASS COFFEE SERVER
600 ml
Read all instructions before using
thisproduct.
PRODUCT INFORMATION
Glass Lid Heatproof
glass temperature
difference 248 ºF
(120 ºC)
Sealant
on Glass
Lid
Glass Pot Heatproof glass
temperature difference 248 ºF (120 ºC)
Silicone
Handle
Heatproof glass
temperature
difference
356 ºF (180 ºC)
Sealant Air Hole
Spout
Sealant
Stopper
USER PRECAUTIONS
FOR MICROWAVE USE ONLY • DO NOT
EXPOSE TO DIRECT FLAME • DO NOT USE
WITH OVENS
• Always place one hand on the
lid when pouring. A teabag
inside the server could hit the
lid causing the lid to come off
and the liquid to spill.
Blue Brew logo should show when folded
MODEL NO.
BB1008
Page size 5.5”x 8.5“ FOLDS to 2.75” x 2.125”

18_0912
Questions?
Visit us on the web at www.bluebrewcoffee.com or Call 847-393-7121
Blue Brew •Waukegan, IL 60087 • USA
www.bluebrewcoffee.com
• DO NOT use server if it is cracked, chipped or highly
scratched. A damaged server could break unexpectedly.
• Do not use a metal spoon or object in server. A metal
object hitting the sides of the glass server may
cause breakage.
DO NOT use if damaged DO NOT hit sides
• Do not touch the glass server with a wet cloth or place
it on a wet surface while hot. The sudden change in
temperature may cause the glass to break.
DO NOT touch to a wet surface or wet towel
• If the glass server breaks be very careful when handling
chipped or broken glass. Follow your local regulations
for disposal.
HANDLING PRECAUTIONS-
MICROWAVE OVEN
• Read the microwave oven instruction manual before
using the glass server.
• Use the glass server to reheat and serve drinks such as
coffee and tea.
Water may suddenly boil
over when heated too
quickly. DO NOT place
hands or face near the
glass server when
removing it from the
microwave oven.
• Always wipe water from the
exterior of the glass server
before placing in
microwave oven.
• Never heat the glass server when it is empty or with
only a small amount of liquid.
• Place the glass server with the lid assembled in the
center of the microwave turn table. This will warm the
liquid more efficiently.
• The glass server will be very hot after heating in
the microwave.
– Do not touch with
bare hands.
Always use oven
mitts when
carrying the
server. Hold the
server handle and
server firmly
when carrying.
– Do not place the hot server onto non-heat resistant
surfaces such as plastic table cloths. Place the hot
server onto a potholder to protect the surface.
PRODUCT CARE
Clean with a soft sponge and mild dish washing soap.
Soft Sponge
Mild Dish
Detergent
DO NOT use sponges with abrasive, metal scouring
pads or metal brushes these may damage the
glass server.
DO NOT use abrasive cleaners, they may damage or
scratch the surface of the glass server.
Sponges with
abrasive or metal
scouring pads
Steel Pads
Abrasive
Cleaners
Steel Brush
• Diluted household bleach may be used to clean tough
stains on the glass server. Always follow the household
bleach instructions carefully and wash the glass server
thoroughly after using bleach.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE