Blueair MD Professional Series User manual

BlueairMedical
User Guide
FEATURING
HEPASILENTª
TECHNOLOGY

THANK YOU FOR CHOOSING BLUEAIR
Ready to start breathing cleaner air? First, read this User Guide to ensure
that you use the Blueair Medical safely and effectively. Then plug it in, turn it
on and breathe. Don t hear anything? Check the blue power on light.
Blueair is so quiet, you may not realize it s on. But as the patented
Blueair system removes dust, pollen, smoke, gases and odors from your
indoor environment, we think you ll notice the difference.
GENERAL SAFETY INSTRUCTIONS
The Blueair Medical is an electrical appliance. Before using it for the first time, please read these
safety instructions and take precautions to reduce the risk of fire, electric shock and injury.
(And keep in mind the Limited Warranty applies only if the unit is used according to instructions.)
To reduce the risk of electric shock, the Blueair Medical will automatically turn off when the front
door is opened for cleaning and filter replacement. Additionally, the unit has a grounding type
plug (with a third pin) that will only fit a grounding type outlet. If the plug does not fit your outlet,
contact a licensed electrician to install a grounded outlet. Do not alter the plug in any way.
To avoid electric shock and fire hazards, plug the Blueair Medical directly into an appropriate
electrical outlet (see voltage label on your unit) using the cable provided. The cable is
packaged beneath the unit.
Blueair Medical

Do not allow foreign objects to enter the ventilation or exhaust openings. This may cause
electric shock or damage to the unit.
Never try to repair or adjust any of the electrical or mechanical functions on your Blueair Medical
yourself. Contact your local dealer or Blueair for service center information.
Use only authorized Blueair filters.
USING YOUR BLUEAIR
Place the unit in a location that allows air to circulate freely in, out and around the unit.
Do not place the unit:
•Directly on or against soft furnishings (such as bedding or curtains).
•Near electronically sensitive devices such as a computer (within 6 /10cm).
•Near sources of heat (such as radiators, fireplaces or ovens).
•Near oxygen tanks or other combustible gases.
Do not let the Blueair come in contact with water. It is not designed for use outdoors or
in wet areas (such as bathrooms).
SETTINGS
When turning on the Blueair after the unit has been off, turn the speed control to level 4
for a few minutes of fast initial cleaning. Then adjust the control to the desired speed:
1. HEPASilent™ (for nighttime use)
2. Moderate fan speed (for daytime use)
3. Fast fan speed (for a large room)
4. Maximum operation (for fast initial cleaning or very polluted air)
For best results, run your Blueair Medical 24 hours a day, 7 days a week. Continuous operation
means you get a continuous supply of clean, filtered air circulating throughout the room.
Blueair Medical

How It Works
How It Works
Blueair Medical
Built-in carry handles
4-speed control knob (on side)
Blue “power on” light
Airflow output
Easy-to-change filter
– no tools required
Galvanized Swedish
steel housing
Ion brushes (no ozone generated)
Easy-to-vacuum ion chamber
Airflow intake
Power source and cord
Safety switch automatically turns
power off when door opens

K E E P Y O U R B L U E A I R L O O K I N G G O O D
A N D W O R K I N G W E L L
The Blueair M edical features award-winning Swedish design, materials and workmanship.
Keep your unit in top condition with these cleaning tips:
Wipe the exterior with a soft, clean, damp cloth.
Vacuum the small inlets with a soft brush attachment.
Vacuum inside the ion chamber by opening the front door of the unit and opening the door of
the ion chamber (right-hand side).
Never clean with gasoline, chemical solvents or corrosive materials …they may
damage the surface.
H E L P K E E P T H E P L A N E T H E A LT H Y, T O O
At Blueair, we•re in the business of clean air. Our air purifiers are designed for maximum
improvement of indoor air, with minimum impact on the natural world.
The particle filter is made of polypropylene, which breaks down into water and carbon
dioxide when burned.
Unlike other common filters, ours contain no aluminum, triclosan or other chemical additives.
All major parts are made from high-quality galvanized steel, not plastic.
The external parts have been powder coated for endurance and environmental protection
(with no introduction of chemical outgassing).
The Blueair Medical is energy efficient. From lowest to highest speed, it uses from 20 to 95
watts …no more than a lightbulb.
Blueair air purifiers are built for years of use. They are also designed to be disassembled
and the components sorted and recycled.
Blueair M edical