BluePanther Mini Dice Tower User manual

1. Lay out all the components 2. Assemble interior ledges to slots
in side of the tower first (no glue)
3. Assemble other
side.
Put glue in all notches
on all sides shown.
Use a rubber band
to hold together
then…
4. Put glue in all notches on
both sides of long wall . Flip
tower on its side assemble
long wall to tower.
Blue Panther recommends white or yellow wood glue with at least 10 minute “open time”
Mini Dice Tower by Blue
.Panther is
© 2008 by Blue Panther LLC
All rights reserved.
Mini - Dice Tower by Blue Panther Assembly
5. Flip tower over, put glue in all
notches on both sides of short
side and assemble to tower.
6. Stand tower upside-down. Put glue in
all notches on bottom of tower and in
notches on base. Assemble base to
tower. Watch the glue dry.
Tower
Base
Mini Dice Tower, Birch, Unassembled
Mini Dice Tower, Wood Finish, Unassembled
MiniDice Tower, Stone Finish, Unassembled

11. Place drawer upside down
and apply glue to all notches.
Check out our whole line of dice towers and board games at www.bluepantherllc.com!
12. Apply glue to notches in drawer
bottom and assemble to drawer.
13. Assemble drawer to
tower & roll the dice!
© 2008 by Blue Panther LLC
All rights reserved.
www.bluepantherllc.com
10. Glue notches on drawer sides
and drawer back. Assemble
drawer back to drawer sides.
Secure with a rubber band.
8. Glue notch in drawer side
(not visible) and assemble
to drawer front.
9. Glue and assemble the other
drawer side the same way.
7. Place front of dice
drawer face down