Sanus WSS21 User manual

WSS 21 / WSS 22
SPEAKER STAND
INSTRUCTION MANUAL
We’ll Make It Stress-Free
If you have any questions along the way, just give us a call.
1-800-359-5520. We’re ready to help!
Sonos®One™Sonos®PLAY:1™Sonos®PLAY:3™Sonos®PLAY:3™

2
This stand is designed to support only Sonos®One™, PLAY:1™and PLAY:3™ speakers.
IMPORTANT SAFETY INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE – SAVE THESE INSTRUCTIONS
CAUTION: Avoid potential personal injuries and property damage!
•Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.
•Please read through these instructions completely to be sure you’re comfortable with this easy install process.
• Do not use this product for any purpose not explicitly specified by manufacturer.
• Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.
• If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product,
contact Customer Service at 1-800-359-5520.
Before getting started, let’s make sure this product is perfect for you!
5.8 lbs.
(2.6 kg)
Speaker Weight Limit
DO NOT EXCEED
Tool Needed Screwdriver

3
34
866
10
254
13
322
Dimensions
34 in.
(866 mm)
10 in.
(254 mm)
13 in.
(322 mm)
Top View
Front View

1/4-20 x 3/4 in.
M6 x 20 mm M6
STEP 4STEP 1 STEP 2
4
Quantities shown are for one speaker stand.
Parts and Hardware
NOTE: Not all hardware included will be used.
OPTIONAL
Base
Base Screw
Lock Washer
Carpet Spikes
Spike Nuts
Rubber Pads
Tube
Top Collar
Bottom Collar
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to
your dealer; contact Customer Service. Never use damaged parts!
05 x1
06 x1
07 x4
08 x4 09 x4
01 x1
03 x1
04 x1
02
x1

1/4-20 x 5/8 in.
STEP 5 STEP 6
5
1/4-20 x 3/8 in.
11 x1
10 x1
12 x1
13 x1
14 x1
15 x1
Sonos®One™/ PLAY:1™
Bracket
Bracket Screw
Sonos®PLAY:3™
Horizontal Bracket
Sonos®PLAY:3™
Vertical Bracket
2.7 in. Felt Pad
Speaker Screw

6
Attach Base to Tube STEP 1
02
01
1/4-20 x 3/4 in
04
03

7
Slide Collars onto Tube STEP 2
05
06

8
Route Speaker Power Cable STEP 3
NOTE: Ethernet cable, if required (see your
speaker manual), should always be installed
AFTER the appropriate power cable. (See page 9).
One™
PLAY:1™
On
PL
A
PLAY:3™Ethernet
PLA
Eth
01
02

9
Route Ethernet Cable OPTIONAL
Ethernet
Et
h
01
02
OPT

10
Optional Carpet Spikes
Rubber Pads
Install Rubber Pads -or- Carpet Spikes STEP 4
Twist rubber pads 07 into the base 02 .WARNING: The ends of carpet spikes 08 are sharp and
may scratch flooring, damage wiring, or be hazardous to children.
07 02 02
OR
09 08
08
09
HEIGHT
ADJUST