Bluesky MediaDesk MKII 2.1 System User manual

Blue Sky International
70 Sea Lane
Farmingdale, NY 11735
www.abluesky.com
MediaDesk MKII
2.1 and 5.1 System

MediaDesk 5.1 System
Introduction
The MediaDesk MKII 5.1 system is an improved version of the acclaimed
MediaDesk speaker system. Like the original, the MediaDesk MKII is a full-range
monitoring system with integrated subwoofer, that is optimized for desktop
audio production, computer-driven audio recording, etc.
MediaDesk MKII 5.1 includes 5 compact satellite speakers, a dedicated 8”
subwoofer with bass-manegment, and a wired remote control with individual
channel level adjustments and 6-channel master volume control.
We hope that this systems brings you years of accurate and problem free
operation. We ask that you take the time to read this manual, register the
product and visit our website for any updated information regarding this
product. If you have any questions please don’t hesitate to contact us.
Thank you for choosing Blue Sky!
Important notes
about the MediaDesk
5.1 System and this
Owner’s Manual
2.1 / 5.1 Mode Switch:
IMPORTANT NOTE: The 2.1 /5.1 mode switch must be to 5.1 for the 5.1 system
to operate correctly. This switch can be found on the Left /Right amplifier.
MediaDesk 5.1 System
what is included?
A MediaDesk 5.1 system is shipped in two boxes and includes the items listed
below. Please carefully unpack each item and inspect the components for
damage. If any part of the system has been damaged, please contact the
dealer that supplied the product or Blue Sky directly.
MediaDesk 5.1 System Inventory:
5 MediaDesk Satellite Speakers (SATs)
1 MediaDesk 5.1 subwoofer
5 10 Foot length of copper speaker cable
1 MediaDesk 5.1 Remote (with cable)
1 Owner’s Manual
1 Warranty Card
2.1 / 5.1 Mode
Switch
ONON
PUS H
PUS H
MediaDesk



 
  






 


 
 






 






   
   


 
 
 
DO NOT OPEN
RISK OF ELECTRIC SHOCK !
CAUTION
AVIS: RISQUE DE CHOC ELECTRIQUE
NE PAS OUVRIR
O N
  
  
  





blue sky international
70 Sea Lane
Farmingdale, NY 11735

S et to 5. 1
when
3-ch
upgrade
installed
360 watts ma x
 
  
   


 


 
mediades k 2.1 artwork
5/17/04 R E V A.1
   
   

Technical Information
This next section outlines the components, specifications and performance
data that make this product such a uniquely high value.
In order to continually improve all of its products Blue Sky reserves the right
to change these specifications without notice.
MediaDesk 2.1 Specifications
General Specifications
Input Impedance (all inputs)
20k Ohms balanced Input attenuator =+14 dBu
52k Ohms balanced Input attenuator =+24 dBu
5k Ohms unbalanced RCA input
Common Mode Rejection Ratio
40 dB typical @ 60Hz (balanced input only)
Maximum Input Level
+12 / +24 dBu balanced (Set by input attenuator)
+14 dBu unbalanced
Subwoofer maximum output +24 dBu balanced
Subwoofer output impedance 200 ohms balanced
Amplifier power output
Note: Long term power output is limited by the
speaker protection circuitry
Short term power output 1 channel driven:
65 watts x 1 @ <.05% THD into 4 ohms @ 1 kHz
Short term power output 2 channels driven :
55 watts x 2 @ <.05% THD into 4 ohms @ 1 kHz
Subwoofer power output:
65 watts x 1 @ <.05% THD into 4 ohms @ 50 HZ
Mains voltages:
115/230V 50/60 HZ switchable
Maximum power consumption: 380 watts
5.1 System
Volume Control range 50 dB in 1 dB steps
Channel trim range +/- 6 dB in 1 dB steps
LFE gain range 0/+10 dB switchable
Satellite
• Lacquer finished baffle
• Low diffraction front baffle design with flush mounted drivers
• Solid 3/4” MDF enclosure with 1” MDF baffle
• Dimensions: Please see page 18
• Weight 5 lbs.
• 1/4”x 20 inserts for attachment of OmniMount
• 3/8” x16 insert for attachment to microphone stand with adapter
(adapter not supplied)
• 4” cast frame Neodymium hemispherical woofer
• 1” Dual ring radiator Neodymium tweeter
• Fully video shielded
• Satellite Low frequency crossover 110 Hz
• Tweeter Crossover Frequency 2.0 kHz
The following specifications are measured using the MediaDesk Amplifier
• Frequency Response Satellite
+/- 2.5dB 300 to 10 kHz
+/- 3.0dB 110 to 20 kHz
• Voltage Sensitivity (at reference gain)
-12 dBu = 90dB SPL @ 1M
Balanced Input attenuator set to +12 dBu
1 dBu = 90 dB SPL @ 1M
Balanced Input attenuator set to +24 dBu
240 mV = 90 dB SPL @ 1M
RCA input 4 ohm nominal impedance
8” Sealed Box Subwoofer
• Fully video shielded.
• High excursion driver with 2” voice coil
• Cast frame Foam surround
• Aluminum cone
• Solid 3/4” MDF construction with 1” MDF baffle
• Flush mounted driver
• Dimensions: See page 19
• Weight 45 lbs.
• Frequency Response Subwoofer
Anechoic Response:
35 to 110Hz +/-3dB
Typical In-Room Response:
20 to 200Hz (3000 Cubic Feet)

Satellite Cabinet
Dimensions
9.50
241.3 mm
6.25
158.8 mm
6.00
152.4 mm
5.75
146.1 mm
6.38
162.1 mm
2.60
66.1 mm
1.25
31.8 mm
3/8" x 16 THREAD
1/4" X 20 THREAD
9.25
235.0 mm
2.25
57.1 mm
3.13
79.4 mm
MediaDesk MKII
SAT Dimensions

Subwoofer Cabinet
Dimensions
14.0
355 .6 mm
14.0
355 .6 mm
15.7
399 .6 mm
14.4
364 .8 mm
1.7
43.0 mm
7.9
200 .0 mm
MediaDesk MKII 5.1 SUB
(2.1 version only has 1 heatsink)
MediaDesk MKII SUB Dimensions

MediaDesk™ 5.1 Remote
1.242
.675
1.956
6.496
4.016
1
-1
-2 0
-3
-4
-5
-6 6 5
4
3
2
1-1
-2 0
-3
-4
-5
-6 6 5
4
3
21-1 -2 0
-3
-4
-5-6 6 5
4
3
2
1-1
-2 0
-3
-4
-5
-6 5
4
3
2
1-1
-2 0
-3
-4
-5-6 65
4
3
21-1
-2 0
-3
-4
-5
-6 65
4
3
2
6
LEFT
CENTER
RiGHT
LS RS
SUB
MediaDesk
 | 5.1 Volume Control
-30 dB
-20 dB
-6 dB
-40 dB
0 dBOFF
-15 dB
-12 dB
-9 dB
-3 dB
-1 dB
MediaDesk 5.1 Remote
Dimensions in
US/English Standard (inches)