BLUGUARD XIMPLE User manual

XIMPLE Wireless Alarm
Designed for home and business security.
Easy to setup and use with XIMPLE App.
Bluguard Series Products User Manual
Perfectly match all Android and iOS smart phones.
World famous expert of smart-home alarm system
User Manual

1
P3
P7
P21
P22
P23
P26
●Get ready and power on
●XIMPLE App [Setting by smartphone]
●FAQ
●Appendix1: Accessory installing
●Appendix2: XIMPLE Sight IP Camera settings
●Appendix3: Product specification lists
MENU
The screenshots and texts might be different from the version you’re using. Please refer to the latest one.

3
Get ready and power on
Insert sim card and connect the power cable
Power ON
• On the back of the panel, open the battery cover, you will see a slot for your
SIM Card. Insert the Sim Card and connect the power cable.
For those micro or nano SIM cards, please use sim adapter to fit the card slot.
• Flip the switch on the back of the panel to the ON position. Replace the battery cover.
Wait 20 seconds as the system runs a start-up diagnostic with a welcome screen.
• You will hear a confirmation when the test is complete.
When you see the main screen ( left ) the system is ready.
• XIMPLE uses GSM based SIM cards to send text messages and make phone calls.
• Make sure PIN-codes and voicemail are de-activated on the SIM before use with the panel.
• Make a note of the SIM telephone number, you will need it for setup.

4
Power Light & Exit Delay Button
Work with the main panel 1/3
LED Monitor
• The XIMPLE uses MicroUSB as the power cable interface.
• You can easily recharge it via any MicroUSB cable.
Control Button
Press to enter the settings menu.
Press to select.
Press to navigate.
Press to go back.
Child Lock
Lock: Long-press for 6 seconds until the lock icon shows on screen.
Unlock: Long-press for 6 seconds until the lock icon disappears.
Power Light with logo.
Long-press to activate Exit Delay.
Exit Delay means the system will wait a few seconds before going into ARM status.
This allows you to leave your home without triggering the alarm. The delay time can be adjusted in the XIMPLE App.

5
Work with the main panel 2/3
08:18 18°c
Wednesday, September 15
Signal Bars
Indicate the GSM signal strength.
Battery Life
Indicate the remain battery life when AC power is OFF.
Arm
All active sensors can trigger alarm.
Home Arm
Only those on Home mode stop trigger alarm.
Alarm Clock Status
Indicate one or more Alarm Clock has been set.
Real-time Temperature
The temperature surrounding main panel.
Users can change ºC or ºF in settings.
Clock
After initializing process, the time
will synchronize with your phone’s.
SIM Card Status
Flashing when starting up or SIM card error.
AC Power
External power is available.
Disarm
Stop trigger alarm, except those on 24-hours mode.
Arming Schedule
Indicate the Arm Schedule has been set.
Child Lock
Indicate the Child Lock is active.

6
Work with the main panel 3/3
Alarm Clock
Check all working alarm clocks set by XIMPLE APP.
ºC/ ºF Switch
Switch the temperature scale between Fahrenheit and Celsius.
Screen Timeout
Set the screen saving time.

7
XIMPLE App User Manual
Setting by smartphone

8
Initializing by XIMPLE App
• Make sure your smart phone is online.
• Tap XIMPLE App icon.
• You can download XIMPLE App from
both App Store or Google Play, or visit
our download page listed above from
your phone.
• XIMPLE App supports global languages
• Choose Auto Detect to use the phone’s current language.
www.bluguard.com.my/ximple
About languages
• There is a build-in default language
pack on App. It will automatically check
and fetch the latest available language
files, or use the latest saved language
pack or default one.
• You don’t have to reset App while
switching language. The settings will
immediately effect right after the lan-
guage is selected.

9
Setting by smartphone
Add a new XIMPLE 1/2
• XIMPLE App is a great tool to control XIMPLE. XIMPLE should be added to XIMPLE App before using, which we call binding.
One XIMPLE App can handle more than one XIMPLE. The phone number of XIMPLE and the password would be asked during binding.
Different role has its default password.
Administrator: General operations and advanced settings are available. User: General operations only.
• The beginners will get kindly reminder, which could help them through the settings step by step.
• XIMPLE App supports renaming for the main panel, which is especially useful when managing multiple devices.
• Users without having a XIMPLE may experience the products in the demo mode of XIMPLE App.
• Some carriers might ask you to remove the 0 at the start of the mobile number when country code is selected.

10
Add a new XIMPLE 2/2
• XIMPLE App sends an authorization request SMS to XIMPLE. Please wait for the reply.
• XIMPLE App can recognize the verification code in SMS and fill it automatically. (Android only)
• Users may need to fill the codes manually due to some limitation of iOS system or some Android phones.
About the reply SMS
• Because of the limitation of iOS, we can’t cap-
ture the SMS of iPhone. So you have to type in
the verification codes by your own.
• Few Android phones may also need to enter
codes manually due to the limitation from some
so-called security software, or the self-made ROM
by hobbyists.
• Most of the time, users only need to wait few
seconds.
• If you can’t receive the reply SMS, please check
the XIMPLE phone numbers entered before, or
if the phone is charged. Sometimes you need to
turn to Step 1 to remove or add the 0 at the start
of the mobile number, and try again.

11
Setting by smartphone
Switch between one/two hands mode
One/two hands mode
• There are different sizes of smart phones with
Android or iOS systems, which bring operational
inconvenience for users.
• We bring convenience by offering one/two
hands modes for both small sizes phones (3.5
inches including under) and big sizes phones
and tablet PC (4 inches including above)
• It’s one good case to show Archtron® ’s principle:
make every effort to minimum users’ operative
difficulty.
One Hand Mode Two Hands Mode

12
How to use the Easy Control Panel
• Arm: All accessories under none “Disable” status are on arm.
• Home arm: Only the accessories on "Instant" or "24 Hours" mode are on arm.
• Disarm: Only “24 Hours”mode accessories are on arm.
System will alarm when one or more accessories on arm is triggered.
Navigator
Swap to switch between menus.
The other two menus are [Accessories and
Device Info] and [Settings]
Easy Control Panel
Arm, Disarm, Home Arm, SOS, Etc.
Accessories QuickView
The fastest way to use your accessories.
Manage & Help
Add more main panels, Reinitialization,
Help & Feedback.

13
Setting by smartphone
How to add emergency contacts
• Slide softly on Main Panel, switch to [Accessories and Device Info] menu.
• Click [Emergency contacts]. Up to 6 emergency contacts are for settings. Tap any of them for editing.
• The XIMPLE calls and texts to emergency contacts when alarming. You can decide which informing message to receive.
• Please set your cellphone number as the 1st emergency contact. Because only the first one could receive arming notification.
** Press ** to monitor and talk via phone to main panel. 88 Press 88 to listen again.
## Press  to cancel SOS. Hang up to call the next emergency contact.
When you get an incoming emergency call, you could follow the instructions above to operate via phone.

14
How to add accessories
• Click + on top-right of the screen.
• Scan the bar code or QR code printed on accessories with phone’s camera.
• Name the accessory.
• Set the trigger modes or other properties as you need, then save.
Tips:
When pairing with Smart Switch or
Wireless Siren, please power it up
before saving pairing settings.

15
Setting by smartphone
Manage and operate XIMPLE Sight IP Camera 1/3
• Like adding accessories, tap + to scan QR code on camera then name it.
• If you want to be informed to check the real-time video (like the camera facing the door) when alarm is trigger by certain accessory
(like the door/window sensor installed on the front door), you can use [inform when … alarms:] and tick the related accessories.
• You would be asked to install a video plug-in the first time visiting to the camera. It won’t bother you anymore.

16
Manage and operate XIMPLE Sight IP Camera 2/3
• Move: Watch by dragging on the screen or tapping Move button and control with joystick.
• SnapShot: Snapshot the current screen and save it to phone album.
• Sound: Listen to the sound around XIMPLE Sight.
• Talk: Talk while tapping and it plays immediately via camera speaker.
SYNC with phone’s timezone:
SYNC with phone’s timezone. Synchronize
the timezone with your phone’s
WiSetting:
Connect IP camera wirelessly.
Format your SD card:
Erase and make your SD card recordable.
View Record Video:
List all the recorded video on your SD card,
can be sorted by date. Click to play.
Motion Detect Record:
Automatically record video when any motion
is detected (5s before + 15s after).

17
Setting by smartphone
• The auto-capture feature only works on Android® phones.
No Yes
ATTENTION: An alarm message is
received. Check the live video from
your XIMPLE Sight now?
Manage and operate XIMPLE Sight IP Camera 3/3
1. If a thief intrudes and triggers some acces-
sory alarm, the emergency contacts would
get informing SMS and alarming call right
after that.
2. XIMPLE App captures the informing SMS right
after that and reminds the user to check live
video from the camera paired before. Users get
informed immediately even when the App is
exited.
3. Just one tap to show you the real-time
video! The thief is nowhere to hide!
Appendix: How XIMPLE Sight works when alarm occurs?

18
Advanced settings and other features 1/3
Emergency Contact:
Up to 6 contacts for setting.
Alarm Clock:
Up to 4 clocks for setting, with 4 modes each.
Temperature Setting:
An informing SMS would be received when
surrounding temperature is out of the safe
range you set.
Knock Over to SOS:
Punch or knock over the main panel to trigger
SOS when the switch is ON.
(Strongly recommended to those live alone)
Ready to ARM:
Needs to work with door/window sensors. The
system will inform you to check and refuse to
arm when door/window is still open.
Language Setting:
Select and apply the app language.
(Language for XIMPLE menu and SMS needs to
be set via main panel)

19
Setting by smartphone
SMS Forward:
Forward the SMS from the setting number to the first emergency contact.
(Mainly used for checking Sim card balance by forwarding SMS of phone bill from local carrier)
Advanced settings and other features 2/3
Arming Schedule:
Up to 6 groups of settings for daily arming.
(Disarm is not supported for security consideration)
Exit Delay:
Waiting time before arming when receiving an order. It can be 90 seconds longest.
Entry Delay:
If some sensors in delay mode trigger alarm, system will wait few seconds before
activating alarm. It can be 90 seconds longest.
Speaker Volume:
The build-in speaker volume, with 4 grades and 1 is weakest.
Change Password:
Admin and user password settings, for authorization while initializing.
Re-initialization:
All settings of this phone would be erased if re-initialized.
Siren Time:
The build-in siren time, up to 30 minutes long last.

20
Advanced settings and other features 3/3
Logs & Events:
List recent arm, disarm and alarm records.
• Security Accessory’s Trigger Mode:
Show names of paired accessories and
their trigger modes.
• Remote Controller List:
Show names of paired remote controllers.
• XIMPLE Sight List & Linking Status:
Show all paired XIMPLE Sights’ names and
their linking accessories status.
• Smart Switch List:
Show all paired Smart Switch.
Sim Card Balance:
Check the balance by sending query SMS to
local carrier from XIMPLE.
System Status:
Check current time, arm status, etc.
Informing Strategies:
Check types of informing SMS received from
XIMPLE when event occurs.
(Like power down, temperature alarm, etc.)
Arming Schedule:
Check timing arming schedule.
Alarm Clock List:
Show all available alarm clocks.
Realtime Temperature:
Check temperature around XIMPLE.
Emergency Contacts:
Show added emergency contacts in XIMPLE.
Delay Time:
Check delay settings for Arm/Alarm.
XIMPLE sends SMS to reply your inquiry here.