BMZ New-Style Display Product information sheet

New-Style Display
Sportive Display
Original user manual

1Your e-bike display
Page 2 of8
1 Your e-bike display
1.1 Variants
The compact sportive display can be installed close to the handle discreetly. In
case of a fall, it is less susceptible to damage.
The big new-style display is easy to read and comes with additional functions. The
system is easy-to-operate with its new-style remote.
1.2 Explanation of symbols
The various displays have a similar structure. The new-style display is also
equipped with a multi-functional display and a display, which shows the current
overall performance proportionately for driver and engine.
Symbols
1 Shift mode
2 Light
3 Warning
4 Battery charging
level (1.2.1)
5 Speed
6 Unit (km/h, mph)
7 Support level
(1.2.2)
8 Performance
portion of driver
9 Performance
portion of engine
10 Multi-functional
display (1.2.3)
1.2.1 Filling level indication
when charging
when driving
0-19 %
100-80 %
20-39 %
79-60 %
40-59 %
59-40 %
60-79 %
39-20 %
80-99 %
19-10 %
100 %
9-0 %
1.2.2 Support levels
Display
Support level
off
1 (minimum)
Sportive display
New-style display
Figure 1
Display symbols
Left : New-style display
Right: Sportive display
Table1
Filling level indication
blinking
Table 2
Display of the support
level
3
1
2
4
5
6
7
9
10
8
4
6
2
1
3
5
7

2Assembly
Version 0.14 Page 3 of 8
2
3 (maximum)
1.2.3 Multi-functional display
Function
Unit
Time of Day
hh:mm (24 hrs or 12 h
am/pm)
Tour dist. (Trip Distance)
km | mi
Tour kcal (Trip Calories)
kcal
Tour Time (Trip Time)
hh:mm
Ø Speed (Avg. speed)
km | mi
Max-Speed
km/h | mi/h
Total Distance
km | mi
Total Time
hh:mm
1.3 Operating elements
Operating elements
1 On/Off (push-button)
2 Light (push-button)
3 Pushing help (push-
button)
4 Up (rocker switch)
5 Menu (touch field)
6 Down (rocker switch)
1.4 USB port
The display has a micro-USB-port on the rear side. With a right USB cable, you
can charge other devices with it, e.g. your cell phone.
The charge current is 0.5 ampere. Consider the
permissible charge current of your devices.
2 Assembly
2.1 Installing the new-style display
Engine and batteries are installed.
Allen key AF 2.5
Allen key AF 3
Intermediate cable
1. Install the new-style remote close to the handle on the handle bar.
(AF 2.5)
2. Install display bracket at the centre of the handle bar (AF 3).
Table 3
Multi-functional display
Figure 2
Control buttons
ATTENTION
Prerequisites
Tools
Instructions
4
1
2
3
5
6

3Operation
Page 4 of8
3. Set the new-style display tilted to 45° to the left on the bracket and
turn straight.
4. Connect the display to the engine by the intermediate cable.
2.2 Taking off the new-style display
1. Separate the display from the intermediate cable.
2. Turn the new-style display to 45° left and take it off from the top.
3.
2.3 Installing sportive display
Engine and batteries are installed.
Allen key AF 2.5
1. Install the sportive display close to the left handle. (AF 2.5)
2. Connect the plug connection to the engine.
3 Operation
3.1 Switching on and off the system
The system is installed according to the specifications.
The battery is inserted and charged.
Activate the e-bike/pedelec battery
Press the On/Off button for 2 seconds.
3.2 Changing the stand-by mode and the operating mode
Press the On/Off button briefly.
Prerequisites
Tools
Instructions
Prerequisites
Instructions
Instructions

3Operation
Version 0.14 Page 5 of 8
3.3 Changing the support level
Press the rocker switch Up to increase the support level.
Press the rocker switch Down to lower the support level.
3.4 Enabling the pushing help
For Pedelec user
Press the button pushing help for three seconds.
Release the button to exit
For S-pedelec user
Press the button pushing help briefly.
Release the button pushing help for maximum 5 seconds
Press the button pushing help for minimum 3 seconds again.
Release the button to exit
3.5 Switching on and off the light
For pedelec user
Press the button Light briefly.
For s-pedelec users, the lighting is constantly on.
Instructions
Instructions
Instructions
Instructions
Note

3Operation
Page 6 of8
3.6 Switching over to multi-functional display
Tap on the touch field Menu.
3.7 Change the settings
3.7.1 New-style display
Following settings can be made:
Field
Value
Reset trip
Set the run time, calories burned, distance,
average speed to 0
Reset all
Set all values including the total run time to 0
Date
DD/MM/YY
Time format
24/12
Time
hh/mm
Language
German/English
Metric/Anglo-American
km/mi
1. Press the button light for three seconds.
2. Press the touch field Menu till the desired menu point is reached.
3. Set the value with the rocker switch Up and Down.
4. Tap on the touch field Menu to confirm.
You can exist the setting menu after the last field by
pressing the touch field Menu. You can exit from the
setting menu by briefly pressing the button Light.
3.7.2 Sportive display
The sportive display can show miles or kilometre.
1. Press the button light for three seconds.
2. Set the unit with the rocker switch Up and Down.
3. Press the button light for three seconds to confirm.
Instructions
Overview
Table 4
Settings
Instructions
Note
Overview
Instructions

Page 8 of8
Batterien-Montage-Zentrum GmbH
Am Sportplatz 30
63791 Karlstein
Phone no.: 06188 9956-0
Fax: [phone]
Email: [e-mail]
Item No. New-style display 27937
Item No. Sportive display: 27938
Country of origin: Germany
Symbol: [CE, TÜV, etc.]
Hotline: [phone]
(14 ct/min from German landline| maximum price on mobile number: 42 ct/min)
Original user manual for new-style display, sportive display
Version: 0.2
Product
identification
After-sales service
Document
identification
© 2015 BMZ GmbH. Subject to modifications. BMZ assumes no liability for technical or editorial errors.