BOB Gear UPPAbaby User manual

BOB Gear®by Britax (888) 427-4829 or (704) 409-1699
4140 Pleasant Road, Fort Mill, South Carolina 29708
www.bobgear.com
UPPABABY®/BOB GEAR®
INFANT CAR SEAT ADAPTER (ICSA)
UPPABABY®/BOB GEAR®
ADAPTATEUR DE SIÈGE D'AUTO
UPPABABY®/BOB GEAR®
ADAPTADOR PARA ASIENTO DE SEGURIDAD
User Guide
Guide de l'utilisation
Guía del usuario

BOB Gear®recommends that you register your
stroller at bobgear.com/registration. This will
allow us to notify you directly if there are any
product recalls.
For updates to this user guide, warranty and
other recent product notications, please visit
bobgear.com periodically or any time before
making approved changes or adding approved
equipment to your stroller.
WELCOME TO BOB GEAR®

Contents
Safety Information���������������������������������������������������������������2
Warnings �������������������������������������������������������������������������������������������� 2
Important Notes��������������������������������������������������������������������������������� 2
Compatibilty�������������������������������������������������������������������������3
Features��������������������������������������������������������������������������������3
Infant Car Seat Adapter (ICSA) System for
UPPAbaby®/BOB GEAR®Infant Car Seats���������������������������������������� 3
Stroller Receivers������������������������������������������������������������������������������� 3
UPPAbaby®Infant Car Seats ������������������������������������������������������������� 4
Installing Your ICSA System�����������������������������������������������5
Identifying Stroller Receiver Type������������������������������������������������������� 5
Attaching Removable Receivers to Stroller Without
Built-In Receivers������������������������������������������������������������������������������� 6
Attaching ICSA to Stroller������������������������������������������������������������������ 8
Infant Car Seat Installation�������������������������������������������������9
Preparing to Attach Infant Car Seat��������������������������������������������������� 9
Attaching the Infant Car Seat����������������������������������������������������������� 10
Removing ICSA from Stroller Receivers �������������������������11
Detaching Removable Receivers from Strollers ������������12
Limited Warranty ���������������������������������������������������������������13
BOB®, BOB Gear®, BRITAX®and Alterrain™ are trademarks owned by Britax Child Safety,
Inc� UPPAbaby®is a trademark owned by Monahan Products, LLC� All Rights Reserved
2021� This product and its components are subject to change without notice�
P13156800_A:02�21

BOB Gear®
2
Safety Information
WARNING
Failure to follow all warnings and instructions could result
in SERIOUS INJURY or DEATH�
Read these instructions carefully before using this product� To
ensure proper use, store this user guide in a convenient place so it
can be consulted often�
• Never leave children unattended in the stroller or infant car seat�
• Always follow the infant car seat manufacturer’s instructions�
Do not exceed the manufacturer’s instructions for maximum load
carrying capacity of the infant car seat� Exceeding carrying capacity
may cause the stroller to become unstable and tip resulting in
serious injury�
• Do not use off-road or on uneven terrain when using the infant car
seat adapter with an infant car seat installed� Doing so may cause
the stroller to become unstable and tip resulting in serious injury�
• Do not run or jog when using infant car seat adapter with infant
car seat�
• Avoid nger entrapment or injury� Always ensure any child
occupants or bystanders are away from the stroller while folding
or unfolding�
• Avoid serious injury from falling or sliding out� Always use infant
car seat harness�
• Do not modify the infant car seat adapter or remove any labels�
Doing so voids the warranty and could lead to a dangerous condition�
IMPORTANT:
• Always keep your infant car seat carry handle locked in the vertical/
carry position while in stroller, as extra protection for your child�
• Always conrm infant car seat adapter is properly locked in place
in stroller accessory adapters prior to use�
• Always conrm infant car seat is secured to infant car seat adapter�
• Do not place children directly in the stroller seat with the infant car
seat adapter installed� Remove infant car seat adapter from stroller
prior to placing a child directly into the stroller seat�
• Care must be taken when attaching infant car seat to infant
car seat adapter to make sure hands and ngers are clear of
contacting surfaces�
• Always remove infant car seat adapter before folding stroller to
prevent damage�

INFANT CAR SEAT ADAPTER (ICSA) User Guide
3
Compatibility
This infant car seat adapter (ICSA) system is designed for use with
most BOB Gear®single strollers manufactured after 2015 and
UPPAbaby®infant car seats� See bobgear.com/carseatadapters for
specic stroller model and car seat compatibility information� Do not use
with infant car seats other than those specically mentioned�
Removable Receivers
Infant Car Sear Adapter (ICSA) for UPPAbaby®Infant Car Seats
Stroller Receivers
Parts Description:
• Receiver Socket:
Securely connects the locking
end cap of the ICSA to the
removable receiver�
• Release Button (Yellow):
While pressed, allows the
removable receiver to be detached
from the stroller�
• Release Button (Gray):
While pressed, allows the locking
end cap of the ICSA system to be
detached from the receiver socket�
Features
Receivers
Locking End Cap
Front Tube
ICSA:
Removable Receivers:
(See page 5 for more details)
Release
Button
(yellow)
Receiver
Socket
Release
Button
(gray)

BOB Gear®
4
Harness
Carry Handle
Release Button
NOTE: UPPAbaby®MESA™ shown. Similar key features exist on all
compatible UPPAbaby® infant car seats. See infant car seat user guide
for more information on car seat features and installation.
Release
Button
(gray)
Receiver
Socket
Built-In Receivers Parts Description:
• Receiver Socket:
Securely connects the
locking end cap of the ICSA
to the built-in receiver�
• Release Button (Gray):
While pressed, allows the
locking end cap of the ICSA
system to be detached from
the receiver socket�
UPPAbaby®Infant Car Seats

INFANT CAR SEAT ADAPTER (ICSA) User Guide
5
Installing Your ICSA System
Identifying Receiver Type
NOTE: This package includes two removable receivers. These
receivers are to only be used on strollers WITHOUT “built-in receivers”
(See below reference illustration). Once installed on the stroller, these
receivers allow a stroller without built-in receivers to accept an infant car
seat adapter (ICSA).
For strollers WITH built-in receivers, please skip to page 8 for
instructions on how to attach the ICSA.
NOTE: When the stroller has built-in receivers, do not use the removable
receivers included with the ICSA system. Please set them aside.
Stroller WITH Built-in Receivers Stroller WITHOUT Built-in Receivers
Built-In
Receivers
Failure to attach ICSA securely to stroller may result in serious
injury or death�
WARNING!

BOB Gear®
6
1� Prepare Stroller
(A) Set parking brake�
(B) Rotate canopy
towards handlebar�
NOTE: For more information
see stroller user guide.
2� Identify the “R” for right and
“L” for left embossed on the
inside of the receivers� Receivers
will need to be installed on the
child’s respective side (e�g� the
“R” receiver on the child’s right
when sitting in the seat)� For an
additional check, identify the
“BOB Gear®Logo” embossed on
the receivers� The logo will always
be facing the outside of the
stroller when installed correctly�
3� Locate Yellow Locking Pins�
Identify the fabric opening
within the seating area
alongside the frame�
Pull fabric away from the
frame to reveal two yellow
locking pins�
Left Outside Facing
Right Inside Facing
Zoom-In View Of
Locking Pins
Attaching Removable Receivers to Stroller Without
Built-In Receivers

INFANT CAR SEAT ADAPTER (ICSA) User Guide
7
4� Slide receiver into the fabric
opening, aligning with the
yellow locking pins� Push
down on the receiver to
engage with the locking pins
and securely attach to the
stroller� Repeat steps on
opposite side to install the
second receiver�
NOTE: The removable
receivers are securely attached
when you hear a “click” and
see a green bar revealed
within the yellow button of the
receiver. If the green bar is not
visible and you do not hear
a click, slide receiver up and
down or reinstall to ensure a
secure attachment.
5� Ensure green bars are visible
and pull on each receiver to
verify secure attachment�
Your stroller is now converted
so that it can receive an infant
car seat adapter (ICSA)�
Green Bar

BOB Gear®
8
Attaching ICSA to Stroller
1� Prepare Stroller
(A) Set parking brake�
(B) Rotate canopy towards
handlebar�
NOTE: For more information
see stroller user guide.
2� Push ICSA locking end
caps straight into receiver
sockets fully�
NOTE:
Listen for click or
snap noise on each side.
NOTE: When the stroller has built-in receivers, do not use the removable
receivers included with the ICSA system. Please set them aside.
3� Verify proper installation�
Pull on each end (left and
right) of ICSA front tube to
verify ICSA is securely locked
into place�

INFANT CAR SEAT ADAPTER (ICSA) User Guide
9
Infant Car Seat Installation
Preparing to Attach Infant Car Seat
1� Practice attaching and
removing unoccupied infant
car seat several times until
the function becomes familiar
before attaching infant car
seat to ICSA for the rst time�
2� Place infant into infant car seat�
Fasten harness securely�
NOTE: For more information see
infant car seat user guide.
3� Position infant car seat carry
handle� Move infant car seat
carry handle into upright,
carrying position�
NOTE:
Infant should always be
secure in the infant car seat
harness when using
the stroller.
Failure to securely attach infant car seat and properly secure
infant with seat harness of infant car seat may result in serious
injury or death�
WARNING!

BOB Gear®
10
3� Verify infant car seat
is latched properly� Push
infant car seat straight down
onto ICSA until secure�
NOTE:
Listen for click or
snap noise on each side.
4� Verify infant car seat is
securely attached� Lift up
on each side to ensure the
infant car seat is secure�
Attaching Infant Car Seat
1� Prepare Stroller
(A) Set parking brake�
(B) Recline stroller seat�
(C) Rotate canopy towards
handlebar�
NOTE: For more information
see stroller user guide.
2� Align infant car seat� Place
infant car seat rear facing,
directly centered on top of
ICSA, and align carry handle
hinge on infant car seat with
receivers on ICSA�
Failure to securely attach infant car seat to ICSA may result in
serious injury or death�
WARNING!

INFANT CAR SEAT ADAPTER (ICSA) User Guide
11
Removing Infant Car Seat from the Stroller
1� Prepare Stroller
(A) Set parking brake�
(B) Rotate canopy towards
handlebar�
NOTE: For more information
see stroller user guide.
NOTE:
If infant car seat
handle is down, move handle
into upright, carrying position.
Removing ICSA from Stroller Receivers
1� Prepare Stroller
(A) Set parking brake�
(B) Rotate canopy towards
handlebar�
NOTE: For more information
see stroller user guide.
2� Remove ICSA from receivers�
Press the gray receiver
release buttons while pulling
ICSA forward and out of
receiver sockets, keeping
alignment even, left to right,
as you pull�
2� Remove infant car seat� Lift
the infant car seat away from
the ICSA, while pressing the
release button�
NOTE: For more information
see infant car seat user guide.
Release Button
(gray)

BOB Gear®
12
Detaching Removable Receivers from Stroller
NOTE:
This section instructs on how to detach the removable
receivers from strollers that do not have built-in receivers.
1� Prepare Stroller
(A) Set parking brake�
(B) Rotate canopy towards
handlebar�
NOTE: For more information
see stroller user guide.
2� Remove receivers
from stroller� Press yellow
release button on the
removable receiver and
pull receiver away from the
stroller frame� Repeat steps
on opposite side�
Release
Button (yellow)

INFANT CAR SEAT ADAPTER (ICSA) User Guide
13
LIMITED WARRANTY
LIMITED WARRANTY
This product is warranted for one (1) year from the date of original
purchase� Your exclusive remedy for this warranty is that Britax®will, at its
option, provide repair or replacement components for this product� Britax®
reserves the right to discontinue or change parts, models, or products,
or to make substitutions� Warranty is only valid for the original purchaser
and proof of purchase is required to exercise this warranty� Labor and
freight charges are not included� To make a claim under this warranty, you
must contact BOB Gear’s Customer Support Team at 1-888-427-4829
or 1-704-409-1699, or write to us using the address on the front cover of
this booklet�
WARRANTY LIMITATIONS
This warranty does not include damages which arise from negligence,
misuse or use not in accordance with the product instruction�
The use of non-Britax®/BOB Gear®products or accessories are NOT
approved and may void the warranty�
LIMITATIONS OF DAMAGES
The warranty and remedies as set forth above are exclusive and in lieu of
all others, oral or written, express or implied� In no event will Britax®, or
the retailer selling this product, be liable for you to any damages, including
incidental or consequential damages, arising out of the use or inability to
use this product�
LIMITATIONS OF WARRANTIES AND OTHER WARRANTY TERMS
AND STATE LAWS
Any implied warranties, including implied warranties of merchantability
and tness for a particular purpose, shall be limited to the duration and
terms of the express written warranty� Some states do not allow limitations
on how long an implied warranty lasts or the exclusion or limitation of
incidental or consequential damages, so the above limitations may not
apply to you� This warranty gives you specic legal rights, and you may
have other rights, which vary from state to state� Neither Britax®, nor the
retailer selling this product, authorizes any person to create for it any
other warranty, obligation, or liability in connection with this product�
PRODUCT REGISTRATION
Please complete and mail the owner registration card included with
the purchase of your stroller or visit us.britax.com/registration to register
your stroller�


Table des matières
Information de sécurité�������������������������������������������������������2
Mises en garde ���������������������������������������������������������������������������������� 2
Remarques importantes �������������������������������������������������������������������� 2
Compatibilit�����������������������������������������������������������������������3
Caractéristiques ������������������������������������������������������������������3
Système d’adaptateur de siège d’auto pour bébé
UPPAbaby®/BOB GEAR®������������������������������������������������������������������� 3
Récepteurs de poussette������������������������������������������������������������������� 3
Compatible avec les sièges d’auto pour bébé UPPAbaby®�������������� 4
Installation de votre adaptateur�����������������������������������������5
Identication du récepteur de la poussette ��������������������������������������� 5
Installation des récepteurs amovibles sur une poussette sans
récepteurs intégrés ���������������������������������������������������������������������������� 6
Installation de l’adaptateur sur la poussette�������������������������������������� 8
Installation du siège d’auto ������������������������������������������������9
Préparation en vue de la xation du siège d’auto ����������������������������� 9
Fixation du siège d’auto ������������������������������������������������������������������ 10
Retrait de l’adaptateur des récepteurs de la poussette 11
Retrait des récepteurs amovibles de la poussette ��������12
Garantie limitée �����������������������������������������������������������������13
BOB®, BOB Gear®, BRITAX®et Alterrain™ sont des marques de commerce qui
appartiennent à Britax Child Safety, Inc� UPPAbaby®sont des marques de commerce qui
appartiennent à Monahan Products, LLC� Tous droits réservés, 2021� Ce produit et ses
composants peuvent faire l’objet de modications sans préavis�
P13156800_A:02�21

BOB Gear®
2
Information De Sécurité
MISE EN GARDE!
Le non-respect des mises en garde et des instructions peut entraîner
des BLESSURES GRAVES et même la MORT�
Il convient de bien lire ces instructions avant d’utiliser le produit�
Afin de garantir une utilisation appropriée, ce guide doit être
conservé dans un endroit à portée de main de façon à pouvoir être
consulté régulièrement�
• Ne laissez jamais les enfants sans surveillance dans la poussette ou le
siège d’auto�
• Respectez à la lettre les instructions du fabricant du siège d’auto� Ne
dépassez pas la capacité de charge maximale du siège d’auto précisée
dans les instructions du fabricant sous peine de déstabiliser la poussette et
de la faire basculer, ce qui pourrait causer de graves blessures�
• Veillez à ne pas emprunter de circuits hors route ou de terrains accidentés
si vous utilisez l’adaptateur de siège d’auto avec le siège d’auto installé
sous peine de déstabiliser la poussette et de la faire basculer, ce qui
pourrait causer de graves blessures�
• Veillez à ne pas courir ou faire votre jogging si vous utilisez l’adaptateur
avec le siège d’auto�
• Évitez les pincements ou les blessures aux doigts� Assurez-vous que tout
enfant ou autre personne est éloigné de la poussette lors de son pliage ou
de son dépliage�
• Veillez à toujours utiliser le harnais du siège d’auto, sans quoi le bébé
pourrait tomber ou glisser hors du siège, et se blesser gravement�
• Prenez soin de ne pas modier l’adaptateur de siège d’auto ni de retirer les
étiquettes� Ce faisant, vous annuleriez la garantie et risqueriez de mettre en
péril la sécurité du bébé�
IMPORTANTES :
• Dans la poussette, maintenez toujours la poignée de transport du
siège d’auto verrouillée en position verticale de transport, en guise
de protection supplémentaire pour votre enfant�
• Vériez toujours que l’adaptateur de siège d’auto est parfaitement
verrouillé dans les adaptateurs d’accessoire de la poussette avant
de l’utiliser�
• Vériez toujours que le siège d’auto est bien xé à l’adaptateur�
• Ne déposez pas votre enfant directement dans la poussette
quand l’adaptateur de siège d’auto est installé� Retirez d’abord
l’adaptateur de siège d’auto de la poussette avant d’y déposer
votre enfant�
• Quand vous xez le siège d’auto à l’adaptateur, veillez à tenir vos
mains et vos doigts à l’écart des surfaces de contact�
• Retirez toujours l’adaptateur avant de plier la poussette an d’éviter
de l’endommager�

Guide d’utilisation de ICSA
3
Compatibilité
Ce système d’adaptateur pour siège d’auto pour bébé (ICSA) est
conçu pour être utilisé avec la plupart des poussettes simples
BOB Gear®fabriquées après 2015 et les sièges d’auto pour bébé
UPPAbaby®� Consultez le site bobgear.com/carseatadapters pour plus
de renseignements sur la compatibilité d’une poussette ou d’un siège
d’auto en particulier� N’utilisez pas ce produit avec des sièges d’auto
pour bébé autres que ceux spéciquement mentionnés�
Récepteurs Amovibles
SYSTÈME D’ADAPTATEUR DE SIÈGES D’AUTO POUR UPPAbaby®
Bouton de
déverrouillage
(jaune)
Raccord de languette
de xation
Bouton de
déverrouillage
(gris)
Récepteurs De La Poussette
Description des pièces :
• Raccord de languette de fixation :
Permet d’attacher de façon
sécuritaire le capuchon de
protection verrouillable de
l’adaptateur au récepteur amovible�
• Bouton de déverrouillage (Jaune) :
Lorsque ce bouton est enfoncé,
le récepteur amovible peut être
détaché de la poussette�
• Bouton de déverrouillage (Gris) :
Lorsque ce bouton est enfoncé, le
capuchon de protection verrouillable
de l’adaptateur peut être détaché du
raccord de languette de xation�
Caractérisiques
Récepteurs
Capuchon de protection
verrouillable
Tube avant
ICSA:
Récepteurs amovibles :
(Consultez la page 5 pour
plus de détails)

BOB Gear®
4
Harnais
Poignée de
transport
Boutons de
déverrouillage
REMARQUE : UPPAbaby®MESA™ illustré . Les mêmes
caractéristiques principales existent sur tous les sièges d’auto pour
bébé UPPAbaby®compatibles. Consultez le guide d’utilisation du
siège d’auto pour plus de renseignements sur ses caractéristiques et
son installation.
Bouton de
déverrouillage
(gris)
Raccord de
languette de
xation
Récepteurs Intégrés Description des pièces :
• Raccord de languette de fixation :
Permet d’attacher de façon
sécuritaire le capuchon de
protection verrouillable de
l’adaptateur au récepteur intégré�
• Bouton de déverrouillage (Gris) :
Lorsque ce bouton est enfoncé,
le capuchon de protection
verrouillable de l’adaptateur
peut être détaché du raccord de
languette de xation�
Siéges D’Auto Pour Bébé UPPAbaby®
Table of contents
Languages:
Other BOB Gear Car Seat manuals