BOCCA TS-BLACK Operator's manual

BOCCA
Tower Fan
User Instruction Manual
MODEL NO.: TS-BLACK/TS-WHITE

· Thank you very much for purchasing our products
· Please read this manual carefully before using
· Keep the instruction manual in a safe place
Safety precautions
This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall
not be made by children without supervision.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
1. Before use, check that the voltage used is the same as the one identified on the unit.
2. When the fan is not assembled, do not turn on the power, and turn off the power when moving
the fan.
3. Do not use wet hands to remove the power plug, to avoid the risk of electrification or electric
shock.
4. Do not insert your fingers or sharp objects into the guard when the fan is running.
5. Use the fan away from high temperature, high humidity, acid and alkali oil, insecticide, curtains
and other articles that are easy to be sucked in.
6. Babies and the elderly should not be directly under high wind for a long time.
7. Do not place the fan on uneven floor to prevent the fan from overturning.
8. Before use, it is necessary to first check any damage with the power cord and the plug. If the
power cord is damaged, in order to avoid danger, it must be replaced by professional workers from
the manufacturer’s maintenance department or similar department.
9. When leaving the machine or when the machine is not used for a long time, turn off the power
and remove the power plug, so as to avoid the circuit failure.
10. Do not place it in a place where curtains, etc. may be sucked in or covered.

11. Do not cover any items when used.
12. The fan is not intended for extended use by persons (including children) with reduced physical
capabilities.
13. During the transport, assembly and storage, observe not to collide and squeeze the fan,
especially the blade must be properly kept, resulting in no deformation, so as not to affect the
performance of the fan.
14. In case of any abnormal noise, smell, smoke and other phenomena during the use, lose no time
to shut off the power and send to our after-sales service department for maintenance.
15. Do not blow against the stove or gas.
CAUTION: Before removing the protective housing, make sure that the fan is disconnected from
the power supply.
※Fan overheating protection: there is a thermal fuse installed in the fan motor, when the motor is
overheated due to a variety of accidents, and the motor temperature reaches the level to activate
the thermal fuse, the fuse will be blown out to cut off the power.
Product features
First of all, welcome to use our products. The series of luxurious tower fans manufactured by
us is featured with beautiful appearance, novel structure, lightweight and convenience,
three-dimensional wind supply, softness and comfort, and the motor has low temperature rise and
little noise, easy maintenance, suitable to be used in houses, hotels and other places, which is an
ideal home appliance for you to remove summer heat and enjoy the cool air.
Parts list (schematic)

How to assembly
1. Remove the two parts of the base from the box, so that the holes of the two-part base are
aligned and the two parts are formed into a complete base. (As shown in Fig. 1)
2. Run the power cord through the base, align the base with the holes on the fan body, then secure
the power cord under the base clip to tighten the base with the fan body. (As shown in Fig. 2)
3. When the base is disassembled, screw out the screws first, and then take the base out. (The
method to disassemble the base is as shown in Fig. 3)

Performance specification and parameters
Model
Specification
Rated
voltage
Rated
frequency
Rated
power
Noise level
TS-BLACK
TS-WHITE
1120*180*185mm
110V
60Hz
40W
≤50dB(A)
How to use
I. Method for remote control type
Operate using a remote control (each button on the remote control is the same as that of an
actual fan):
ON/OFF:
When this button is pushed, the fan will start at a low speed; by pressing this button again,
the fan will stop working.
Timing selection:
When the fan is under working, if this button is pushed, it will enter timing status and the
setting at this time is 1 hour. The timing can be selected from 1h to 12h. When the timer is set to
12h, and at that time you push this button, the timing selection will be canceled. The timing hours
change as per the way shown below:
Selection of wind:
This button is to select the wind mode. When this button is repeatedly pushed, the wind mode
will change from normal wind, natural wind, sleep wind and normal wind in turns; the three
different wind modes have following features:
Normal wind: the normal wind mode is simply the Low, Medium & High fan speed speeds.
Natural wind: the natural wind mode automatically selects wind speed randomly as you
would find outdoors. The natural wind also has low, medium and high speeds.

Sleeping wind: the sleeping wind allows you to set a speed at low, medium and high.
The wind speed of these three sleeping wind modes changes as below:
1. High sleeping wind: the air flows with high speed for half an hour, then drops to medium
speed for half an hour, and finally drops to low speed.
2. Medium sleeping wind: the air flow begins with medium speed for half an hour and finally
drops to low speed.
3. Low sleeping wind: the air flows at a low natural wind speed, till the preset time is reached
or the fan is turned off.
Wind speed:
When this button is pushed, three different wind speeds of low, medium and high can be set.
Oscillation:
When this button is pushed, the fan starts to oscillate the wind by pressing this button again,
the fan stops oscillate the wind.
※The above operation can also be carried out on the control panel of the fan body, with
the method same as the one described above.
Note: only when “ON/OFF” is pushed, the fan can send wind.
Proper usage of the remote control and battery replacement
1. When the remote control is used, make sure that the head of the front of the remote control is
aligned with the receiving window on the fan body.
2. The remote control can be about 5m from the front of the fan body; it can be normally operated
if the deviation is within 30 degrees.
3. Avoid direct sunlight on the receiving window, so as not to affect the effect of the receiver.
4. If the remote control is not used for a long time, remove the battery and handle it properly.
5. When using the remote control, install the battery. The remote control operates on one lithium
battery, with the insertion method as shown below:
a. Open the battery cover. b. Insert a new battery, pay attention to the polarity of the battery (+ and
-). c. Close the battery cover.
Circuit diagram

(You will not be separately notified for any change in the function and structure, and the actual
product shall prevail)
How to maintain:
1. Before cleaning this product, make sure that the power is turned off first.
2. Do not use water or other liquid to clean the electrical components (such as switching power
supply, motor, etc.) and the electrical components can be wiped clean with a clean cloth.
3. Do not use any grinding tools and solvents that can damage the surface to clean the product.
You can wash the product with detergent and wipe dry with a clean cloth.
4. Do not take the product apart for modification. It is recommended to inspect and clean the
product annually as to extend its service life.
WARRANTY INSTRUCTIONS:
We offer 100% customer satisfaction of 1 year quality guarantee. If you have any question, free
contact me by email: [email protected].

Correct Disposal of this product
This marking indicates that this product should not be disposed with other
household wastes throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To return your
used device, please use the return and collection systems or contact the retailer
where the product was purchased. They can take this product for environmental
safe recycling.