BOERPLAY Puppet theatre House Alberca User manual

Puppet theatre "House Alberca"
BBIE111.HUR
Powered by TCPDF (www.tcpdf.org) 1 / 1

© Copyright BOERplay 4-11-2021 Revision: BBI 111 HxR
Installation instructions
Installatie-instructies
Installationsanleitung
Instrucciones de instalación
Instructions d'installation
NL
DE
ES
FR
- main dimensions
Hoofdafmetingen
Hauptabmessungen
Dimensiones principales
Dimensions principales
NL
DE
ES
FR
Obstakelvrije zone
Hindernissfreie raum
Zona libre de obstáculos
Zone libre d’obstacles
NL
DE
ES
FR
- obstacle free zone
- ground plan
NL
DE
ES
FR
Bodemplan
Bodenplan
Plan de superficie
Plan de surface
Important!
If the soil does not aid in the stability of the equipment being
placed, please pour 50L of concrete per post.
NL - Belangrijk!
Als de bodemgesteldheid niet bijdraagt aan de stabiliteit van
het toestel, dient er 50L beton per staander te worden
toegevoegd.
DE - Achtung!
Wenn der Boden die Stabilität des zu platzierenden Geräts
nicht unterstützt, gießen Sie bitte 50L Beton pro Pfosten ein.
ES - Importante!
Si el tierra no ayuda a la estabilidad del equipo que se está
colocando, vierta 50L de hormigón por poste.
FR - Important !
Si le sol ne contribue pas à la stabilité de l’équipement à
placer, versez 50L de béton par poteau.
!
x
✔✔
> 0,4 m
Important!
It is advisable not to orient playground
equipment with a slide facing south.
NL - Belangrijk!
Toestel bij voorkeur niet met de glijbaan
richting het zuiden te plaatsen.
DE - Achtung!
Es wird empfohlen, ein Spielgerät mit
Rutsche nicht Richtung Süden auszurichten.
ES - Importante!
Se aconseja no orientar juegos con
toboganes hacia el sur.
FR - Important !
Il est conseillé de ne pas orienter de
l’équipement avec toboggans vers le sud.
!
N
S
x

© Copyright BOERplay 4-11-2021 Revision: BBI 111 HxR
main dimensions
Hoofdafmetingen
Hauptabmessungen
Dimensiones principales
Dimensions principales
NL
DE
ES
FR
0,00 m 1,86 m 2,50 m
0,00 m
0,30 m
1,10 m
1,69 m
0,00 m
0,28 m
0,59 m
1,45 m
2,14 m
≤0.20m

© Copyright BOERplay 4-11-2021 Revision: BBI 111 HxR
obstacle free zone
Obstakelvrije zone
Hindernissfreie raum
Zona libre de obstáculos
Zone libre d’obstacles
NL
DE
ES
FR
Impact area
NL
DE
ES
FR
Obstacle free zone
NL
DE
ES
FR
i
Opvangzone
Ausprallbereich
Zona de impacto
Zone d‘impact
Obstakelvrije zone
Hindernissfreie raum
Zona libre de obstáculos
Zone libre d’obstacles
4,72 m
0,92 m 2,57 m 1,24 m
1,01 m
0,50 m
R1,50m
R1,50m
R1,50m
R1,50m
1,00 m
5,54 m
0,50 m 2,00 m 3,04 m

© Copyright BOERplay 4-11-2021 Revision: BBI 111 HxR
ground plan
Bodemplan
Bodenplan
Plan de superficie
Plan de surface
NL
DE
ES
FR
Ground level posts of plastic or wood
NL
DE
ES
FR
Maaiveld staanders van kunststof of hout
Bodennahe Pfosten aus Kunststoff oder Holz
Nivel del suelo para postes de plástico o madera
Niveau au sol pour poteaux en plastique ou en bois
Maaiveld staanders van metaal
Bodennahe Pfosten aus Metall
Nivel del suelo para postes de metal
Niveau au sol pour poteaux en métal
Ground level posts of metal
NL
DE
ES
FR
i
6mm
i
0,50 m
0,70 m
0,59 m
0,25 m
0,92 m 0,88 m 0,80 m 0,62 m 0,26 m
0,50 m 1,35 m 0,72 m 0,80 m 2,18 m
n
0,35m(4x)
0,40 m

© Copyright BOERplay 4-11-2021 Revision: BBI 111 HxR
Assembly manual
Montagehandleiding
Montageanleitungen
Manual de montaje
Manuel de montage
NL
DE
ES
FR
- required tools
Benodigde gereedschappen
Benötigtes Werkzeug
Herramientas requeridas
Outils nécessaires
NL
DE
ES
FR
Montagevolgorde
Montagereihenfolge
Orden de esemblado
Ordre de montage
NL
DE
ES
FR
- order of assembly
- assembly manual - module
NL
DE
ES
FR
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
MOD.BBI.006.x
x
1
MOD.BBI.107.x
x
1
MOD.BBI.108.x
x
1
MOD.BBI.144.x
x
1
MOD.BBI.148
x
1
MOD.BBI.159
x
1
MOD.BBI.148
MOD.BBI.108.x
MOD.BBI.144.x
MOD.BBI.107.x
MOD.BBI.006.x

© Copyright BOERplay 4-11-2021 Revision: BBI 111 HxR
required tools
Benodigde gereedschappen
Benötigtes Werkzeug
Herramientas requeridas
Outils nécessaires
NL
DE
ES
FR
TX-25
Ø3 mm
Ø5 mm
Ø11 mm
Ø12 mm
5
6
No. 10 (2x)
No. 13 (2x)
No. 17 (2x)
Nm
No. 10
No. 13
No. 17
12 Nm
TX-25
TX-40
Ø4.8 mm

© Copyright BOERplay 4-11-2021 Revision: BBI 111 HxR
order of assembly
Montagevolgorde
Montagereihenfolge
Orden de esemblado
Ordre de montage
NL
DE
ES
FR
assembly manual
module
1/6
assembly manual
module
2/6
assembly manual
module
MOD.BBI.006.x
MOD.BBI.144.x
MOD.BBI.108.x

© Copyright BOERplay 4-11-2021 Revision: BBI 111 HxR
3/6
4/6
assembly manual
module
assembly manual
module
MOD.BBI.159
MOD.BBI.107.x

© Copyright BOERplay 4-11-2021 Revision: BBI 111 HxR
5/6
assembly manual
module
6/6
BOER
PLAY
xxx.xxx.xxx
EN 1176
www.boerplay.com
MOD.BBI.148

LOGBOOK
Type indication Figura Play
Article number BBIE111.HUR
Product Name Puppet theatre "House Alberca"
Maximum fall height 0,6 m
Construction year 2023
Certificate 064904
Inspection body TUV Nederland QA BV
Ekkersrijt 4401
5692 DL Son
Manufacturer name Boer Speeltoestellen
Hyacintstraat 2 - 4255 HX Nieuwendijk
Phone: [phone]
Fax: [phone]
Installer name _______________________________________________________
_______________________________________________________
_______________________________________________________
Playground location _______________________________________________________
Information about the owner of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Information about the manager of the playground
Name: _______________________________________________________
Address: _______________________________________________________
Zipcode and city: _______________________________________________________
Contact: _______________________________________________________
Phone number: _______________________________________________________
Powered by TCPDF (www.tcpdf.org)

LOGBOOK
Inspection and maintenance
Date of
inspection
maintenance
Time of
inspection
maintenance
Name
executor of
inspection
Name
executor of
maintenance
Found defects Parts to be
replaced
Accidents
Date
accident
Age of
victim Probable cause of injury Occurred injury Measures taken after accident

Inspection and maintenance intervals
Nr Inspection Maintenance
months
between
inspections
1
Verify equipment's stability, junctions and
missing parts Inspect bolts, screws and nuts for
absence, jams, corrosion and wear
Add missing parts, secure joints, apply
missing fixing agent and replace
corroded parts
1
2
Check suspension for wear Replace worn parts and/or remove non-
functioning parts
1
3
Inspect rotating parts such as hinges, rolling-
element bearings, etc for wear and acceptability
Replace worn parts and/or remove non-
functioning parts
1
4
Check wood for splinters, unacceptable damage
and signs of rot, especially at ground level
Repair damage Replace affected wood
Smoothen splintered wood and sharp
edges
1
5
Inspect foundation for stability, tearing and
coverage
Restore foundation and covering
material
3
6
Examine rubber and synthetic parts for wear,
damage and breakage Replace for OEM original parts
3
7
Examine fibre reinforced plastic parts, especially
slides, for wear
Replace for OEM parts if the fibres are
visible
6
8
Inspect metal for corrosion and damage in the
coating
Restore any damaged coating (after
removing rust and applying primer)
6
9
Check ropes, cables, chains and nets for wear
and damage Steel cables and nets which are
tensioned must be checked for tension
Replace parts where necessary Steel
cables and nets must be tensioned
3
10
Inspect equipment for unsafe changes and
additions
Remove unsafe additions and correct
unsafe changes
1
11
Inspect safety surfaces Restore and repair where necessary
1
Remarks
1 If used intensively, all points require extra attention
2 Extreme weather conditions and locations may require a higher inspection frequency Discuss this with the
supplier
3 Vandalism-sensitive locations require stricter inspections, possibly daily
4 Re-tighten all connections in Robinia equipment two months after first use
5 Re-span spatial networks two months after first use
6 Check the terrain regularly for items that do not belong there, are unsafe or may be used wrongly Examples
are poisonous plants, glass shards, etc Frequency depends on strain

7 Remember that bad maintenance leads to unsafe conditions and notably faster impoverishment of the
playground area
8 Replacement parts can be ordered at the manufacturer with the OEM part numbers on the module drawing
Drawings can be found in the user guide
9 The impact area shall be provided with impact attenuating surface according to the specified falling height
•Up to 0,6m height of fall: no requirements regarding impact attenuation
•Turf, topsoil: suitable up to 1000mm height of fall
•Loose fill (sand, gravel, bark, woodchips): up to 3000mm height of fall Layer thickness is height
of fall / 10 +100mm, with a minimum of 300mm
•Synthetic surfaces (Rubber tiles, artificial turf, wetpour, tigermulch etc ): height of fall and layer
thickness according to the information of the supplier
10 This list is conform the CEN-standard "playground equipment and surfacing NEN-EN 1176-7"
Improving the
foundations
(for equipment without concrete in the standard
foundation)
If the impact area is loose fill (sand, gravel, bark,
woodchip, etc ), or if the soil itself does not add to
stability of the equipment (i e sand, pumice, peat soil)
pour 50l of concrete per post
For instance:
Square: 0,6 x 0,6 x 0,16m
Round: ø0,35 x 0,5m
Round: ø0,50 x 0,2m

© Copyright BOERplay 17-8-2023 Revision: C MOD BBI 006 U
assembly manual - module
Montagehandleiding - module
Montageanleitung - Modul
Manual de ensamblado - módulo
Manuel de montage - module
NL
DE
ES
FR
0,59 m
2,15 m
0,70 m

SMD.BBI.500
© Copyright BOERplay 17-8-2023 Revision: C MOD BBI 006 U
BSR.010.008.008
x
4
BSR.011.008.015
x
18
BSR.026.008.035
x
18
BSR.026.008.040
x
4
BSR.030.008.016
x
22
KST.BBI.011.LPE
x
1
KST.DON.010.060
x
4
KST.DOP.010.060
x
4
SME.BBI.053.372
x
1
KST.BBI.011.LPE
B
B
A (18x)
Detail B (4x)
BSR.010.008.008
KST.DOP.010.060
BSR.030.008.016
KST.DON.010.060
BSR.026.008.040
35 mm 40 mm
Detail A (18x)
BSR.026.008.035
BSR.030.008.016
BSR.011.008.015
SME.BBI.053.372

© Copyright BOERplay 17-8-2023 Revision: C MOD BBI 006 U
OME.VRB.903.VZP
x
1
S.BBI.012.x
x
1
KST.LAM.100.100
x
1
BSR.014.005.052
x
4 BSR.002.005.050
x
4
Ground level posts of plastic or wood
NL
DE
ES
FR
Maaiveld staanders van kunststof of hout
Bodennahe Pfosten aus Kunststoff oder Holz
Nivel del suelo para postes de plástico o madera
Niveau au sol pour poteaux en plastique ou en bois
Maaiveld staanders van metaal
Bodennahe Pfosten aus Metall
Nivel del suelo para postes de metal
Niveau au sol pour poteaux en métal
Ground level posts of metal
NL
DE
ES
FR
i
6mm
Metalen staanders
Pfosten aus Metall
Postes de metal
Poteaux en métal
Metal posts
NL
DE
ES
FR
Plastic or wooden posts
NL
DE
ES
FR
Kunststof of houten staanders
Pfosten aus Kunststoff oder Holz
Postes de plástico o madera
Poteaux en plastique ou en bois
ø5mm
BSR.014.005.052
KST.LAM.100.100
18 mm
ø3mm x 30
BSR.002.005.050
50 mm
S.BBI.012.K
0,70 m
1,28 m
1
/ 3
OME.VRB.903.VZP
i

© Copyright BOERplay 17-8-2023 Revision: C MOD BBI 006 U
OME.KAP.100.xxx
x
3
OME.VRB.903.VZP
x
3
S.BBI.011.x
x
3
KST.LAM.013.006
x
3
BSR.014.005.052
x
12
BSR.002.005.050
x
15
2
/ 3
Glue
NL Lijm
DE Kleber
ES Pegamento
FR Colle
BSR.014.005.052
ø5mm
18 mm
BSR.002.005.050
ø3mm x 30
50 mm
70 mm
Metalen staanders
Pfosten aus Metall
Postes de metal
Poteaux en métal
Metal posts
NL
DE
ES
FR
Plastic or wooden posts
NL
DE
ES
FR
Kunststof of houten staanders
Pfosten aus Kunststoff oder Holz
Postes de plástico o madera
Poteaux en plastique ou en bois
BSR.002.005.070
KST.LAM.013.006
3x
OME.KAP.100.204
0,70 m
2,15 m
OME.VRB.903.VZP
S.BBI.011.K
✔

© Copyright BOERplay 17-8-2023 Revision: C MOD BBI 006 U
BSR.010.010.010
x
8
BSR.026.010.120
x
8
BSR.030.010.002
x
8
KST.DON.010.060
x
8
KST.DOP.010.060
x
8
SMD.BBI.500
x
1
3
/ 3
Detail C (8x)
KST.DOP.010.060
BSR.010.010.010
BSR.030.010.002
KST.DON.010.060
BSR.026.010.120
Nm
! Max 12 Nm !
120 mm
SMD.BBI.500
C
C
C
C
OME.KAP.100.204
S.BBI.012.K
S.BBI.011.K
S.BBI.011.K
S.BBI.011.K