BOMANN WA 5719 User manual

H
HH
H OUSEHOLD
OUSEHOLDOUSEHOLD
OUSEHOLD -
--
- W
WW
W ASHING
ASHING ASHING
ASHING M
MM
M ACHINE
ACHINEACHINE
ACHINE WA
WAWA
WA 5719
57195719
5719
Instruction Manual
Instruction ManualInstruction Manual
Instruction Manual

2
Contents
ContentsContents
Contents
Introduction.............................................................................................................Page 3
General Notes…………………………………………………………..………….…….Page 3
Special safety Information for this Unit…………………………….…………………..Page 4
Unpacking the Appliance………………...……………………….…….………..…..…Page 6
Appliance Equipment……..……………….………………...…………….……..……..Page 6
Installation…………….……...…………….………...………………………...………...Page 7
Startup / Operation………...................……...………………………..…..…….……Page 10
Starting a Wash Program.………………..………………...…………….……………Page 14
Cleaning and Maintenance.....…………………………...……..………………...…..Page 17
Troubleshooting……………………….………..………………………………......….Page 20
Technical Data……………...…………………………..……………..……..…………Page 21
Disposal….………………………..………………..….……………………..……..…..Page 23

3
Introduction
IntroductionIntroduction
Introduction
Thank you for choosing our product. We hope you will enjoy using the appliance.
Symbols in these Instructions for Use
Symbols in these Instructions for UseSymbols in these Instructions for Use
Symbols in these Instructions for Use
Important information for your safety is specially marked. It is essential to comply with
these instructions in order to avoid accidents and prevent damage to the machine:
WARNING:
WARNING:WARNING:
WARNING:
This warns you of dangers to your health and indicates possible injury
risks.
CAUTION:
CAUTION:CAUTION:
CAUTION:
This refers to possible hazards to the machine or other objects.
NOTE
NOTENOTE
NOTE:
::
: This highlights tips and information.
General Notes
General NotesGeneral Notes
General Notes
Read the operating instructions carefully before putting the appliance into operation and
keep the
instructions including the warranty and the receipt. If you give this device to
other people, please also pass on the operating instructions.
NOTE
NOTENOTE
NOTE:
::
:
The illustrations in this instruction manual can deviate from the original appliance.
•The appliance is
designed exclusively for private use and for the envisaged pu
pose. This appliance is not fit for commercial use.
•
The appliance is only to be used as described in the user manual. Do not use the
appliance for any other purpose. Any other use is not intend
ed and can result in
damages or personal injuries.
•Do not use it outdoors. Keep it
away from sources of heat, direct sunlight
•Do not operate the appliance without
withoutwithout
without supervision.
•When not in use, for cleaning, user maintenance works or with
disruption, switch off
the appliance and disconnect the plug (pull the plug itself, not the lead) or turn off
the fuse.
Thank you for choosing our product. We hope you will enjoy using the appliance.
Important information for your safety is specially marked. It is essential to comply with
these instructions in order to avoid accidents and prevent damage to the machine:
risks.
Read the operating instructions carefully before putting the appliance into operation and
instructions including the warranty and the receipt. If you give this device to
The illustrations in this instruction manual can deviate from the original appliance.
designed exclusively for private use and for the envisaged pu
r-
The appliance is only to be used as described in the user manual. Do not use the
ed and can result in
away from sources of heat, direct sunlight
, humidity.
disruption, switch off
the appliance and disconnect the plug (pull the plug itself, not the lead) or turn off

4
•
The appliance and if possible the mains lead have to be checked regularly for signs
of damage. If damage is found the appliance must not be used.
•
For safety reasons, alterations or modifications of the appliance are prohibited.
•
In order to ensure your children’s safety, please keep all packaging (plastic bags,
boxes, polystyrene etc.) out of their reach.
WARNING:
WARNING:WARNING:
WARNING:
Do not allow small children to play with the foil. There is a
danger of suffocation!
danger of suffocation!danger of suffocation!
danger of suffocation!
Special safety Information for this Unit
Special safety Information for this UnitSpecial safety Information for this Unit
Special safety Information for this Unit
WARNING: Hot surface! Danger of burns!
WARNING: Hot surface! Danger of burns!WARNING: Hot surface! Danger of burns!
WARNING: Hot surface! Danger of burns!
During operation the temperature of the bull’s-
eye may be
very hot.
•Before using the
transportation locking screws must be
removed, otherwise it may cause serious damages.
•The dry weight of laundry must not exceed
the max.
loading capacity.
•
The unit must be connected with a new set of hoses to
the water supply; old hose sets should not be
•The maximum / lowest permitted water inlet
pressure is
1 MPa / 0.05 MPa.
•
Do not use any flammable/explosive cleaning agents
such as benzene in the appliance.
The appliance and if possible the mains lead have to be checked regularly for signs
For safety reasons, alterations or modifications of the appliance are prohibited.
In order to ensure your children’s safety, please keep all packaging (plastic bags,
danger of suffocation!
danger of suffocation!danger of suffocation!
danger of suffocation!
Special safety Information for this Unit
Special safety Information for this UnitSpecial safety Information for this Unit
Special safety Information for this Unit
WARNING: Hot surface! Danger of burns!
WARNING: Hot surface! Danger of burns!WARNING: Hot surface! Danger of burns!
WARNING: Hot surface! Danger of burns!
eye may be
transportation locking screws must be
removed, otherwise it may cause serious damages.
the max.
The unit must be connected with a new set of hoses to
the water supply; old hose sets should not be
reused.
pressure is
Do not use any flammable/explosive cleaning agents

5
•In the appliance bottom are located ventilation openings
(depending on model). These may not be blocked e.g.
by carpet. Pay attention to free circulation of air.
•If the unit is used in the bathroom, unplug the power
cord after using as the proximity of water presents a
danger. This even applies when the unit is switched off.
•This appliance can be used by children
children children
children aged from 8
years and above and persons with reduced physical,
sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or in-
struction concerning use of the
use of theuse of the
use of the appliance
applianceappliance
appliance in a safe way
and understand the hazards involved.
•Children
ChildrenChildren
Children shall not play with the appliance.
•Children
ChildrenChildren
Children younger than 3 years should be kept away,
unless they are constantly supervised.
•Cleaning and user maintenance
user maintenanceuser maintenance
user maintenance shall not be made by
children
childrenchildren
children unless they are older 8 years and supervised.
•The appliance must be cleaned regularly. Follow the
instructions in the chapter "Cleaning and Maintenance".
•Do not try to repair the appliance on your own. Always
contact an authorized technician. To avoid the expo-

6
sure to danger, always have faulty cable be replaced
only by the manufacturer, by our customer service or by
qualified person and with a cable of the same type. Do
not use the device if the device or plug is damaged.
Unpacking the Appliance
Unpacking the ApplianceUnpacking the Appliance
Unpacking the Appliance
•Remove the appliance from its packaging.
•
Remove all packaging material, such as foils, filler and cardboard packaging.
•
To prevent hazards, check the appliance for any transport damage.
•
In case of damage, do not put the appliance into operation. Contact your distr
NOTE
NOTENOTE
NOTE:
::
:
Production residue or dust may have collected on the appliance. We recommend clea
ing the appliance according to chapter “Cleaning and Maintenance”.
Appliance
Appliance Appliance
Appliance Equipment
EquipmentEquipment
Equipment
Overview of the
Overview of the Overview of the
Overview of the appliance
applianceappliance
appliance
1 Detergent drawer
2 Appliance door
3 Cover panel of drain p
ump
4 Control panel
5 Power plug
6 Water drain hose
Delivery scope
Delivery scopeDelivery scope
Delivery scope (depending on model)
(depending on model)(depending on model)
(depending on model)
Inlet hose, transport locking screw covers
sure to danger, always have faulty cable be replaced
only by the manufacturer, by our customer service or by
qualified person and with a cable of the same type. Do
not use the device if the device or plug is damaged.
Remove all packaging material, such as foils, filler and cardboard packaging.
To prevent hazards, check the appliance for any transport damage.
In case of damage, do not put the appliance into operation. Contact your distr
ibutor.
Production residue or dust may have collected on the appliance. We recommend clea
n-
ump

7
Installation
InstallationInstallation
Installation
WARNING:
WARNING:WARNING:
WARNING:
The unit must not be connected to the mains during installing. Otherwise there is
ger to life
ger to lifeger to life
ger to life or electric shock hazard
electric shock hazardelectric shock hazard
electric shock hazard!
CAUTION:
CAUTION:CAUTION:
CAUTION:
For a correct operation
the appliance must be connected properly. The specifications
for water supply and drain as well
as the electrical connection must fulfill the required
criteria.
Remove the transport locking screws
Remove the transport locking screwsRemove the transport locking screws
Remove the transport locking screws
CAUTION:
CAUTION:CAUTION:
CAUTION:
•Before using, all transport locking screws
must be removed from the
back. Otherwise it may cause serious damages.
•Keep the transport
locking screws for later use / transport. Never transport the
appliance without properly attached transportation safety!
•Loosen the screws
from the appliance back
and remove them.
•
Plug the holes of transport locking screws with
covers.
Installation location
Installation locationInstallation location
Installation location
•
The site should be located near the water inlet and outlet, as well as near a properly
grounded power socket.
•
Good ventilation around the appliance is required, in order to dissipate the heat
properly. Sufficient clearance must be created for this purpose.
•The clearance to the front must be created so,
that the appliance door can open
without being impeded.
•Make sure that the floor on which the appliance is installed, is
even,
and clean.
The unit must not be connected to the mains during installing. Otherwise there is
da
dada
dan-
n-n-
n-
the appliance must be connected properly. The specifications
as the electrical connection must fulfill the required
must be removed from the
appliance
locking screws for later use / transport. Never transport the
from the appliance back
with a wrench
Plug the holes of transport locking screws with
the supplied
The site should be located near the water inlet and outlet, as well as near a properly
Good ventilation around the appliance is required, in order to dissipate the heat
that the appliance door can open
even,
heat-resistant

8
•Take care of
a solid and horizontal position of the appliance. If the appliance is not
horizontally leveled, adjust the feet accordingly (see “Adjust the feet”).
•Power cord and water hoses may not kinked or squashed.
•The wall socket must be freely accessible.
•Avoid th
Avoid thAvoid th
Avoid the installation:
e installation:e installation:
e installation:
-
near heaters, next to a stove, direct sunlight or any other heat sources;
-
at locations with high humidity (e.g. outdoors), as metal parts would be su
ceptible to corrosion under such circumstances;
-in
rooms where the temperature could drop below freezing. Do not expose
the appliance any weather.
-
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.).
Adjust the feet
Adjust the feetAdjust the feet
Adjust the feet
Loosen the locknuts with a wrench.
Turn to the right to let down the unit;
turn to the left to lift up
unit.
Tighten the lock nuts with the wrench when the
appliance
properly leveled.
The feet must have solid ground contact.
Check with a spirit level if the appliance is leveled horizontally. If the appliance is not in
balance, the feet must be adjusted again.
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
•Looseness locknuts can cause vibration and noise.
•The feet must never be removed. Do not restrict the floor
clearance through ca
pets, strips of wood or similar. Danger of heat accumulation!
Danger of heat accumulation!Danger of heat accumulation!
Danger of heat accumulation!
Water connection
Water connectionWater connection
Water connection
CAUTION:
CAUTION:CAUTION:
CAUTION:
•
The Installation of the water supply must conform to the local laws and regulations.
•The appliance is not
notnot
not suitable for hot water supply.
•Use
the new supplied hose set to connect the appliance to the water supply. Do not
reuse old or used connection sets.
a solid and horizontal position of the appliance. If the appliance is not
horizontally leveled, adjust the feet accordingly (see “Adjust the feet”).
near heaters, next to a stove, direct sunlight or any other heat sources;
at locations with high humidity (e.g. outdoors), as metal parts would be su
s-
rooms where the temperature could drop below freezing. Do not expose
near volatile or flammable materials (e.g. gas, fuel, alcohol, paint, etc.).
turn to the left to lift up
the
appliance
is
The feet must have solid ground contact.
Check with a spirit level if the appliance is leveled horizontally. If the appliance is not in
clearance through ca
r-
The Installation of the water supply must conform to the local laws and regulations.
the new supplied hose set to connect the appliance to the water supply. Do not

9
CAUTION:
CAUTION:CAUTION:
CAUTION:
•
If the water pipe is new or long time not used, ensure before connecting to the
water system, that the water is clear and free from contamination.
Notes on inlet hose safety system (
Notes on inlet hose safety system (Notes on inlet hose safety system (
Notes on inlet hose safety system (
delivery scope depending on model
delivery scope depending on modeldelivery scope depending on model
delivery scope depending on model
The safety system consists of a double-walled inlet hose. It
guarantees to cut off the
water supply when leakage of the inner hose. Switching off the water supply leads over
an electronic contact.
If necessary, you can order an inlet hose safety system from your dealer or in our online
accessories shop, www.bomann.de
www.bomann.dewww.bomann.de
www.bomann.de
. To order, use the reference number found under
“Technical Data”.
Connect the water inlet hose (cold water connection)
Connect the water inlet hose (cold water connection)Connect the water inlet hose (cold water connection)
Connect the water inlet hose (cold water connection)
NOTE
NOTENOTE
NOTE:
::
:
The water pressure must be between 0.05 MPa
and 1 MPa. With higher
a pressure regulator.
•
Connect the water inlet hose to a water thread with ¾“.
hose firmly in the direction of the screw thread; pay attention for a
tight fit.
•
Connect the other end of the inlet hose to the inlet valve on the
appliance back; pay attention for a tight fit too.
Connect the water drain hose
Connect the water drain hoseConnect the water drain hose
Connect the water drain hose
NOTE
NOTENOTE
NOTE:
::
:
The drain hose has a length of approx. 1.5 m
and can extend with a suitable hose and
connecting piece to a length of max. 4 m.
CAUTION:
CAUTION:CAUTION:
CAUTION:
In order to prevent
backflow of contaminated water, the free end of the hose must not
come under the water level of the drain.
•
Connect the drain hose to a drain pipe with a minimum diameter of 40 mm; altern
tively the drain hose can be fixed to a sink or directly to the drai
nage.
If the water pipe is new or long time not used, ensure before connecting to the
delivery scope depending on model
delivery scope depending on modeldelivery scope depending on model
delivery scope depending on model
)
))
)
guarantees to cut off the
water supply when leakage of the inner hose. Switching off the water supply leads over
If necessary, you can order an inlet hose safety system from your dealer or in our online
. To order, use the reference number found under
and 1 MPa. With higher
pressure: use
Connect the water inlet hose to a water thread with ¾“.
Screw the
hose firmly in the direction of the screw thread; pay attention for a
Connect the other end of the inlet hose to the inlet valve on the
and can extend with a suitable hose and
backflow of contaminated water, the free end of the hose must not
Connect the drain hose to a drain pipe with a minimum diameter of 40 mm; altern
a-
nage.

10
•Always make sure that the ho
se is not bent or
squeezed. Use
e.g. a hose holding bow (a) (not
supplied).
•
The hose must be installed at a height of min.
600 mm and max. 10
00 mm above
•Secure the hose securely
in order to
change in position and with it a water leakage.
Electrical connection
Electrical connectionElectrical connection
Electrical connection
WARNING:
WARNING:WARNING:
WARNING:
•
The installation to the mains supply must conform to the local standards and regul
tions.
•Improper connection may cause to an electric shock
electric shockelectric shock
electric shock!
•Do not use multiple sockets or extension cords.
•
It is not allowed to modify the plug provided with the appliance. If the plug does not
fit properly to the outlet, let install a proper outlet by an authorized specialist.
•
The accessibility of the power plug must always be ensured in order
the device from the power supply in case of an emergency.
•
Ensure that your mains power corresponds with the specifications of the appliance.
The specifications are printed on the rating label.
•Connect the mains cable to a properly installed
and earthed wall outlet.
Startup / Operation
Startup / OperationStartup / Operation
Startup / Operation
Prior using for the first t
Prior using for the first tPrior using for the first t
Prior using for the first time
imeime
ime
•Make sure that all transport securing devices has been removed.
•Remove the accessories and any material from the drum.
•Allow the appliance to wash
the first time without any laundry, with the addition of
some washing agent in the program “Cotton 60°C” (see "
Starting a wash program
se is not bent or
e.g. a hose holding bow (a) (not
The hose must be installed at a height of min.
00 mm above
the floor.
in order to
avoid a
The installation to the mains supply must conform to the local standards and regul
a-
It is not allowed to modify the plug provided with the appliance. If the plug does not
fit properly to the outlet, let install a proper outlet by an authorized specialist.
The accessibility of the power plug must always be ensured in order
to disconnect
Ensure that your mains power corresponds with the specifications of the appliance.
and earthed wall outlet.
the first time without any laundry, with the addition of
Starting a wash program
").

11
Preparation of c
Preparation of cPreparation of c
Preparation of clothes
lotheslothes
lothes
CAUTION
CAUTIONCAUTION
CAUTION
•Do not wash any items that are declared as non-
washable. Follow always the i
structions on the care label of your laundry.
•
Do not wash clothes soaked in petrol, thinners, alcohol or solvents.
•
Foreign objects (e.g. nails, coins) can cause damage to garments and components.
•Check the pockets of all garments on content and empty them
completely.
•
Sort your fabrics by color and the symbols contained on the care label. Separate
white and colored laundry. All new colored clothes should be washed separately.
•Turn buttons and embroidery inside.
•Close zippers, buttons and hooks before washin
g. Tie any loose straps and loops.
•Wash bras e.g.
in a pillowcase to prevent leakage of the steel bracket.
•
Particularly delicate fabrics such as curtains, crochet or small items (socks, han
kerchiefs, neckties, etc.) should be washed in a closed bag.
•Remove always all the hooks from curtains.
•
Washing large and heavy parts such as bath towels, jeans, lined jackets and the
like can cause the drum to run unbalanced. We recommend adding one or two
smaller parts; this especially helps with the spinning cycle.
•
The clothes which easily get fuzzed shall be washed separately; otherwise the other
articles can be stained with dust and thrum etc. Preferably, black
clothes and cotton
clothes shall be washed separately because they can easily get stained with the
thrums of other colors when being washed together.
•Clean away dusts, stains and pet hairs from the clothes.
•
For spot removing heavy soiling the laundry can be treated with a special prewash
spray. Follow the operating instructions of the product packaging.
Select proper detergent
Select proper detergentSelect proper detergent
Select proper detergent
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
Always consider the dosage and storage recommendations on the sales packaging.
WAR
WARWAR
WARNING
NINGNING
NING:
::
:
Keep detergent and additives out of reach for children!
washable. Follow always the i
n-
Do not wash clothes soaked in petrol, thinners, alcohol or solvents.
Foreign objects (e.g. nails, coins) can cause damage to garments and components.
completely.
Sort your fabrics by color and the symbols contained on the care label. Separate
white and colored laundry. All new colored clothes should be washed separately.
g. Tie any loose straps and loops.
in a pillowcase to prevent leakage of the steel bracket.
Particularly delicate fabrics such as curtains, crochet or small items (socks, han
d-
Washing large and heavy parts such as bath towels, jeans, lined jackets and the
like can cause the drum to run unbalanced. We recommend adding one or two
The clothes which easily get fuzzed shall be washed separately; otherwise the other
clothes and cotton
clothes shall be washed separately because they can easily get stained with the
For spot removing heavy soiling the laundry can be treated with a special prewash
Always consider the dosage and storage recommendations on the sales packaging.

12
•Use only “slightly foaming”
detergent for washing machines according to type of
fabric (cotton, synthetics, lined or woolen products), color, washing temperature and
degree of soiling. Otherwise foaming can cause overflowing.
•Bleach is alkaline and can damage your clothing,
preferably does not use bleach.
•
Detergents often leave residue in the clothes, which can cause bad odor if not
rinsed properly.
•
Detergent cannot easily get dissolved completely if there is too much detergent or
water temperature is rather low. It can remai
n in clothes, pipes and washing m
chines to pollute the clothes.
•
Washing shall follow the weight of clothes, dirty degrees, local water hardness as
well as the recommendations from the detergent manufacturers. C
onsult the water
company if you are not clear of water hardness.
Detergent drawer
Detergent drawerDetergent drawer
Detergent drawer
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
The dispenser is designed exclusively for the use of detergents for washing machines!
NOTE
NOTENOTE
NOTE:
::
:
•Always add the detergent just before starting the wash
cycle, otherwise it could get
damp and will not dissolve properly.
•At the end of the wash
cycle the detergent dispenser must be empty.
•Pull out the drawer and add the detergent.
IChamber of detergent for the pre-wash.
II Chamber of detergent for the main wash.
Chamber for washing additives (fabric softener). Do not
exceed the MAX marking.
•Close the drawer.
Foam detection
Foam detectionFoam detection
Foam detection
Excessive foaming occurs by using too much detergent. This affects the wash and rinse
cycle. The function automatically checks the
foaming; excessive foam will be removed.
detergent for washing machines according to type of
fabric (cotton, synthetics, lined or woolen products), color, washing temperature and
preferably does not use bleach.
Detergents often leave residue in the clothes, which can cause bad odor if not
Detergent cannot easily get dissolved completely if there is too much detergent or
n in clothes, pipes and washing m
a-
Washing shall follow the weight of clothes, dirty degrees, local water hardness as
onsult the water
The dispenser is designed exclusively for the use of detergents for washing machines!
cycle, otherwise it could get
cycle the detergent dispenser must be empty.
Chamber for washing additives (fabric softener). Do not
Excessive foaming occurs by using too much detergent. This affects the wash and rinse
foaming; excessive foam will be removed.

13
Fill in the laundry
Fill in the laundryFill in the laundry
Fill in the laundry
•Unravel the clothes before putting them into the machine.
•Each load should correspond to the nominal capacity of the appliance. Do not
overload the appliance. Different strengths, sizes and types of laundry can affect
the actual loading capacity. It is advisable to load the appliance just that a normal
circulation during washing is possible.
•Close the door. Make sure that no laundries are caught between the door and seal.
Control panel
Control panelControl panel
Control panel
1
11
1Program selector switch
Program selector switchProgram selector switch
Program selector switch
By turning the switch clockwise or counterclockwise, you select a wash program. You
will find the program details in the „Wash program table“ or under „Selecting a wash
program“.
2
22
2 Vorwaschen
VorwaschenVorwaschen
Vorwaschen
The Prewash function can get an extra wash before main wash.
Suppressing the acoustic signal
Suppressing the acoustic signalSuppressing the acoustic signal
Suppressing the acoustic signal
Press the Vorwaschen-button for 3 seconds to stop the beep upon button presses. A
beep sounds. Press the button to reactivate the beep upon button presses. You will
hear a beep again.
3
33
3 Extra Spülung
Extra SpülungExtra Spülung
Extra Spülung
Extra rinse means to add another rinse cycle after standard 2 time rinse (suitable for
baby clothes).
4
44
4 Kein Schleudern
Kein SchleudernKein Schleudern
Kein Schleudern
The machine will not spin if you choose this function.

14
Activation of safety child lock
Activation of safety child lockActivation of safety child lock
Activation of safety child lock
Press the buttons Extra Spülung and Kein Schleudern at the same time for 3 seconds.
A beep sounds. All buttons, except the Aus-button are locked.
Press the buttons again
for 3 seconds to deactivate the safety child lock. A beep sounds again.
5
55
5 Start/Pause
Start/PauseStart/Pause
Start/Pause
Button to start/pause the selected or running program.
6
66
6 D
DD
Door
oor oor
oor lock
locklock
lock-
--
-Indication
IndicationIndication
Indication
Once a program is started and the door lock is activated,
the indication lights
wash cycle is completed, the door will be unlocked and the indica
tion goes off.
7
77
7 Child
Child Child
Child lock
locklock
lock-
--
-Indication
IndicationIndication
Indication
The indication lights, when the child lock is activated.
Starting a Wash Program
Starting a Wash ProgramStarting a Wash Program
Starting a Wash Program
Wash program table
Wash program tableWash program table
Wash program table
NOTE
NOTENOTE
NOTE:
::
:
The shown values
are approximate and recommendations under standard conditions
and therefore not binding. The consumption data can vary
depending on water pre
sure, water hardness, water inlet temperature, ambient temperature, type and quantity,
as well as power supply and selected additional options from the specified values.
Program
ProgramProgram
Program Temperatur
TemperaturTemperatur
Temperature
ee
e °C
°C°C
°C Loading
Loading Loading
Loading kg
kgkg
kg TIme
TImeTIme
TIme
Cotton ECO 40/60 6 3:35/3:52
Cotton cold/20/30/40/60/90 6
1:35/1:19/1:20/
1:40/1:45/2:40
Synthetic cold/40/60 3
1:18/1:33/1:43
Drum Clean 90 - 1:21
Spin Only - 6 0:12
Drain Only - - 0:01
Rinse & Spin - 6 0:31
Delicate cold/30 2,5 0:55/1:00
Press the buttons Extra Spülung and Kein Schleudern at the same time for 3 seconds.
Press the buttons again
the indication lights
. When the
tion goes off.
are approximate and recommendations under standard conditions
depending on water pre
s-
sure, water hardness, water inlet temperature, ambient temperature, type and quantity,
as well as power supply and selected additional options from the specified values.
Rpm
RpmRpm
Rpm
1.000
1:35/1:19/1:20/
1:40/1:45/2:40
1.000
1:18/1:33/1:43
1.000
400
1.000
-
1.000
600

15
Program
ProgramProgram
Program Temperatur
TemperaturTemperatur
Temperature
ee
e °C
°C°C
°C Loading
Loading Loading
Loading kg
kgkg
kg TIme
TImeTIme
TIme
Ends in
3/6/9h 40 6 3/6/9h (1:13)
Daily Wash
15‘/30‘/45‘ cold/20/30 2
0:15/0:30/0:45
*
* *
* Standard program
Standard programStandard program
Standard program:
: :
: Cotton
CottonCotton
Cotton 60
6060
60°C
°C °C
°C /
//
/ Cotton
Cotton Cotton
Cotton 40°
40°40°
40°C
CC
C
With full and partial load, these are the standard wash programs to identify the infor
mation on the energy label. These programs are suitable to clean normally soiled lau
dry and of combined energy and water consumption most efficiently.
W
WW
Wash program
ash programash program
ash program selection
selectionselection
selection
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
Choose the right wash cycle according to the type, quantity and pollution. Always
sider the instructions on the care label of your laundry.
Select the temperature corresponding to the textiles and pollution. Basically: the higher
the temperature, the higher the power consumption.
Temperatur
TemperaturTemperatur
Temperature
ee
e Explanation
ExplanationExplanation
Explanation
90°C Heavily soiled pure white cotton or linen (e.g. t
ablecloths, sheets and towels).
60°C Moderately soiled colored cotton, linen and synthetic (e.g. s
hirts or underwea
Slightly soiled whites (e.g. underwear).
40°C, 30°C,
20°C, cold
Normally soiled laundry (including synthetic and wool).
Capacity
CapacityCapacity
Capacity
Do not overload the appliance otherwise the laundry is not getting
clean. Refer to the
information in the "Wash program table".
Starting a wash program
Starting a wash programStarting a wash program
Starting a wash program
•Connect the appliance to the power supply.
•The water supply must be opened up to the maximum pressure.
•Load your laundry and fill in the detergent.
Rpm
RpmRpm
Rpm
1.000
0:15/0:30/0:45
800
With full and partial load, these are the standard wash programs to identify the infor
-
mation on the energy label. These programs are suitable to clean normally soiled lau
n-
Choose the right wash cycle according to the type, quantity and pollution. Always
con-
Select the temperature corresponding to the textiles and pollution. Basically: the higher
ablecloths, sheets and towels).
hirts or underwea
r).
clean. Refer to the

16
•Close the appliance door.
•Select the required wash program, the te
mperature and the spin speed.
•Set the available options, if required.
•Press the START/PAUSE button to stat the operation.
Door lock
Door lockDoor lock
Door lock
WAR
WARWAR
WARNING
NINGNING
NING:
::
:
Never try to open the appliance door by force during the operation.
Once a wash program has started, the door cannot be opened. With p
ausing operation
the door also did not open
when the water temperature or the water fill level goes b
yond a certain level.
Program
ProgramProgram
Program change
changechange
change
•Press the EIN/AUS button to cancel the program and to
switch off the power.
•Switch on the power by pressing the EIN/AUS button again.
•Select the desired program and
start the new operation via the START/PAUSE
button.
NOTE
NOTENOTE
NOTE:
::
:
If water has already taken, this will not drained off first.
End of program
End of programEnd of program
End of program
At the end of the wash cycle, the door lock indication and
the Start/Pause button flashes
and it will sound a series of beeps.
Switch off
Switch offSwitch off
Switch off
•Switch off the appliance by pressing the EIN/AUS button.
•Close the water supply!
•
Leave the appliance door slightly open until the next wash cycle to avoid
•If the appliance is not in use for an extended period, d
isconnect the mains plug or
switch off or turn out the fuse.
mperature and the spin speed.
ausing operation
when the water temperature or the water fill level goes b
e-
switch off the power.
start the new operation via the START/PAUSE
the Start/Pause button flashes
Leave the appliance door slightly open until the next wash cycle to avoid
odors.
isconnect the mains plug or

17
Energy saving tips
Energy saving tipsEnergy saving tips
Energy saving tips
•If possible avoid the selection of high wash temperatures.
Modern detergents
achieve good washing results even at low temperatures.
•Select t
he wash program depending on the type of laundry and the required degree
of washing.
•Take advantage of the maximum capacity of each wash program.
•Clean the filter regularly to avoid excessive washing and high
energy
•Ventilate the room well. The room temp
erature should not rise above +35°
Cleaning and Maintenance
Cleaning and MaintenanceCleaning and Maintenance
Cleaning and Maintenance
WARNING:
WARNING:WARNING:
WARNING:
•
Always switch off the appliance and disconnect the plug or turn off / unscrew the
fuse before cleaning and user maintenance.
•Allow the appliance to cool down sufficient before cleaning.
Scalding!
Scalding!Scalding!
Scalding!
•
Do not use steam cleaners for cleaning the appliance; moisture could enter electr
cal components. Risk of electric shock!
Risk of electric shock!Risk of electric shock!
Risk of electric shock!
Hot steam could damage the plastic parts.
The appliance must be dry before restarting operation.
CAUTION:
CAUTION:CAUTION:
CAUTION:
•Do not use a wire brush or other sharp, abrasive items.
•Do not use any acidic or abrasive detergents.
NOTE
NOTENOTE
NOTE:
::
:
Dirty or clogged filter degrades the washing result
. Regularly check the filter
them if necessary.
Modern detergents
he wash program depending on the type of laundry and the required degree
energy
consumption.
erature should not rise above +35°
C.
Always switch off the appliance and disconnect the plug or turn off / unscrew the
Scalding!
Scalding!Scalding!
Scalding!
Do not use steam cleaners for cleaning the appliance; moisture could enter electr
i-
Hot steam could damage the plastic parts.
. Regularly check the filter
and clean

18
Maintenance of the washing machine
Maintenance of the washing machineMaintenance of the washing machine
Maintenance of the washing machine
CAUTION:
CAUTION:CAUTION:
CAUTION:
•
Never use spray cleaners to clean the door panel, this may damage the door lock
and electrical components.
•Check after each wash
the door seal and remove fiber residues, other materials
and foreign objects, otherwise it can lead to water leakage.
•
Clean the appliance outer surfaces and the door sealing thoroughly with a soft,
damp cloth. Use only mild cleaning agent.
•Use a dampened
cloth with a little white vinegar or a special detergent
machines to clean the appliance drum.
•Recommendation: allow the appliance to run
regularly (about every three months)
without loading in e.g. the program “Cotton 60°C”.
•Dry the outer surfaces thoroughly before taking in operation again.
Cleaning the detergent drawer
Cleaning the detergent drawerCleaning the detergent drawer
Cleaning the detergent drawer
•Pull the drawer out until it stops.
•Gently press down the lever in the chamber for the fabric softener
and pull
drawer at the same time completely.
•Wash the guide grooves and the chambers with water.
•Use a soft brush to clean the housing.
•Insert the detergent drawer back again.
Cleaning the inlet filter
Cleaning the inlet filterCleaning the inlet filter
Cleaning the inlet filter
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
•Close the water supply before cleaning!
•Always check if the water hoses are properly
reinstalled and no water leaks.
Never use spray cleaners to clean the door panel, this may damage the door lock
the door seal and remove fiber residues, other materials
Clean the appliance outer surfaces and the door sealing thoroughly with a soft,
cloth with a little white vinegar or a special detergent
for washing
regularly (about every three months)
and pull
out the
reinstalled and no water leaks.

19
Inlet filter at the tap
Inlet filter at the tapInlet filter at the tap
Inlet filter at the tap
Clean the filter when not sufficient water is sup
plied with opened water valve.
•Unscrew the inlet hose from the water valve.
•Wash the inlet filter under running water.
•Reconnect the inlet hose firmly.
Inlet filter at the appliance
Inlet filter at the applianceInlet filter at the appliance
Inlet filter at the appliance
Clean the filter regularly, about every one to three months.
•
Unscrew the inlet hose from the appliance
back.
•Pull out the filter at the appliance with a flat-tong.
•Clean the filter with a small brush.
•Reconnect the inlet hose firmly.
Cleaning the filter of drain pump
Cleaning the filter of drain pumpCleaning the filter of drain pump
Cleaning the filter of drain pump
CAUTION
CAUTIONCAUTION
CAUTION:
::
:
The appliance must never be used without the filter.
The foreign body trap in the drain pump prevents rinsed parts close
the
tem. Clean the pump regularly, about once
a month; depending on use.
Check the foreign body trap if the water in the wash cycle will not drain
ed
creased noise during the drainage. If the pump is clogged, water may
be in the
ance (max. 25 l).
•First, let drain off the
water and switch off the power supply.
•Open the lower cover panel.
•
Place a drip tray under to catch possible water leakage.
•
Turn the cap counterclockwise. Look for leaking water!
filter not completely out!
filter not completely out!filter not completely out!
filter not completely out!
•Interrupt the water flow by turning the
filter clockwise again.
•
If the draining process is completed, turn out the filter completely.
•
Take off the filter and remove any dirt and foreign objects.
•
Insert the cap again and make sure it is tightened well and no
plied with opened water valve.
Unscrew the inlet hose from the appliance
the
drainage sys-
a month; depending on use.
ed
or with in-
be in the
appli-
water and switch off the power supply.
Place a drip tray under to catch possible water leakage.
Turn the cap counterclockwise. Look for leaking water!
Turn
TurnTurn
Turn the
the the
the
filter clockwise again.
If the draining process is completed, turn out the filter completely.
Take off the filter and remove any dirt and foreign objects.
Insert the cap again and make sure it is tightened well and no

20
water can escape.
•Close the lower cover panel.
Antifreeze protection
Antifreeze protectionAntifreeze protection
Antifreeze protection
If the appliance is out of operation and exposed to temperatures below zero, observe
the following precautions:
•Disconnect the mains plug.
•Close the water supply and remove the inlet hose from the water valve.
•Drain the water from the inlet hose and the water valve.
•Reconnect the inlet hose to the water valve.
Troubleshooting
TroubleshootingTroubleshooting
Troubleshooting
Before you contact an authorized specialist
Before you contact an authorized specialistBefore you contact an authorized specialist
Before you contact an authorized specialist
Problem
Problem Problem
Problem Solution
SolutionSolution
Solution
The appliance
does not work
or start.
- Check the power supply.
- Check the water supply.
- Is the door closed?
- Is the appliance switched on or a program selected?
- Did you pressed the START/PAUSE button?
Water drains
continuously.
Check the drain hose connection. The hose must be attached at a
height of min. 600 mm and max. 1000 mm above the floor.
The door does
not open.
- The door safety lock is activated. Is the wash cycle completed?
- Unplug the power cord, if necessary.
Water on the
floor, water
leaks.
Check the water inlet and drain hose for leaks and proper connec-
tion.
Water is taken
in continuously.
Check the inlet water pressure and reduce it, if necessary.