BonsenKitchen EK8903 User manual

OperationInstructions
Model: EK8903
Electric Kettle
www.bonsenkitchen.com

Contents
IMPORTANT SAFEGUARDS
PACKAGE CONTENTS
KNOW YOUR ELECTRIC KETTLE
BEFORE USING YOUR KETTLE
USING YOUR ELECTRIC KETTLE
BOIL-DRY PROTECTION
CLEANING AND MAINTENANCE
REMOVEL OF MINERAL DEPOSITS
WARRANTY CLAIM PROCEDURE
ENVIRONMENT FRIENDLY DISPOL
1-2
3
3
4
4-6
6
6
7
7
8
........................................................................................
................................................................................
..............................................................................
................................................................................
................................................................................
..................................................................................................
.............................................................................................
...........................................................................
...................................................................................
...........................................................................

1
IMPORTANT SAFEGUARDS TIPS
1. Read all instructions before using.
2. Before connecting the kettle to the power supply, check that the voltage
indicated on the appliance (underside the kettle & base) corresponds with the
voltage in your home. If this is not the case, contact your dealer and do not
use the kettle.
3. Do not let the cord hang over edge of table counter or touch hot surface.
4. Do not place on or near a hot gas or electric burner or in a heated oven.
5. Do not operate without water, otherwise heater element would be damaged.
6. Ensure that the kettle is used on a firm and flat surface where the children
can’t touch. This can prevent the kettle from overturning.
7. To protect against a fire, electric shock or personal injury, do not immerse cord,
electric plugs or kettle in water or other liquids.
8. While water boiling, avoid contacting with steam from the spout when water is
boiling or just after it has switched off. Do not be anxious to uncover the lid.
9. Always take care to pour boiling water slowly and carefully without tipping the
kettle too fast.
10. Be careful when opening the lid for refilling when the kettle is hot.
11. Close supervision is necessary when any appliance is used by or near children.
12. Do not touch the hot surface. Use the handle or the button only.
13. The kettle is for household use only.
14. Do not use outdoors.
15. The use of accessory attachments, which are not recommended by the
appliance manufacturer, that may result in fire, electric shock or personal injury.
16. Unplug from outlet when not in use and before cleaning. Allow to cool before
putting on or taking off parts and before cleaning the appliance.
17. Always ensure the lid is closed and do not lift it while the water is boiling.
Scalding may occur if the lid is removed during the brewing cycles.
18. If the supply cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.

2
19. This appliance has been incorporated with a grounded plug. Please ensure
the wall outlet in your house is well earthed.
20. Do not use the appliance for other than intended use.
21. The kettle can only use with the stand provided.
22. If the kettle is overfilled, boiling water may be ejected.
23. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliances by a person responsible for their safety.
24. Children should be supervised to ensure that they do not play with the
appliance.
25. This appliance is intended to be used in household and similar applications
such as:
26.Save these instructions.
– Staff kitchen areas in shops, offices and other working environments;
– Farmhouses;
– By clients in hotels, motels and other residential type environments;
– Bed and breakfast type environments.

1. Spout
2. Lid
3. Lid decoration piece
4. Handle cover
5. 212°F button, Power button
or Keep-warm button
6. Temperature selector button
7. Handle
8. Power cord
9. Base
10. Button cover decoration
11. Glass
3
KNOW YOUR ELECTRIC KETTLE
PACKAGE CONTENTS
1 Water Kettle
1 Power Base with Cord
1 Operating Instructions
Check the delivery contents for completeness immediately after unpacking.
Remove all packaging materials and plastic film from the appliance.
1
2
3
4
11
9
10
8
7
65

4
BEFORE USING YOUR KETTLE
USING YOUR ELECTRIC KETTLE
If you are using the kettle for the first time, it is recommended that you should
clean your kettle before use by boiling a full kettle of water twice and then
discarding the water.
NOTE: The max capacity of kettle is 1.8QT.
NOTE: Do not fill the water over the maximum level, as water may spill out of the
spout when boiling. Ensure that the lid is firmly in place before plugging the
power outlet.
NOTE: Designed power base can be rotated by 360 degree to facilitate the plug
connecting with power outlet.
1. To fill the kettle, remove it from the power base and open the lid by pressing
Lid Release button, fill with the desired amount of water, and then close the lid.
Alternatively, the kettle may be filled through the spout. The water level should
not exceed MAX marks or sit below MIN level. Too little water will result in the
kettle switching off before the water has boiled.
3. Function
EK8903 is a kettle of using IC program to control heat up or keep warm water.
1) With power-on detecting function: when put the kettle onto the power base,
all the four indicators in the control panel turn on and one beep can be heard.
At the same time, the indicator in the kettle lights up in red, green, blue in
sequence and then turns off, and the indicators in the control panel turn off
simultaneously, together with one beep heard.
2) Different colors for indicating different temperatures: The indicator in the
kettle will illuminate in different colors under different water temperature at
any condition. 122°F(green), 158°F(blue), 176°F(purple), 194°F(lightgreen),
212°F(red).
2. Lay the kettle on the power base and connect the plug into a power outlet.

4. Operation
1) Boil water
Put the kettle onto the power base, press “212°F” button, the kettle starts to
work and heat the water up to 212°F directly, at that time, the indicators in
the control panel do not light up and the indicator in the kettle illuminates in
red. When the water temperature reaches 212°F the indicator in the kettle
will turn off and two beeps can be heard.
2) Heat water to selected temperature
Put the kettle onto the power base, press "+/-" button to select your desired
water temperature (122°F/158°F/176°F/194°F ) , after select it, its
corresponding indicator turns on. And then press “212℉ button”, the kettle
starts to work and heat the water to the selected temperature, at that time,
all the indicators turn off and two beeps can be heard.
3) Keep warm at the selected temperature
Put the kettle onto the power base, press "+/-" button to select your desired
keep-warm temperature ( 122°F/158°F/176°F/194°F ) , after select it, its
corresponding indicator turns on. And then hold and press “212℉ button” for
3 seconds, and the kettle will enter into keep-warm mode after heat the water
to the selected temperature, at that time, the indicator of the selected
keep-warm temperature keeps blinking in a cycle of one time/second. When
the water temperature reaches the selected temperature, one beep can be
heard and the kettle will enter into the keep-warm condition. After keeping
warm for 30 minutes, the kettle will shut off automatically and all the
indicators will turn off.
NOTE: Ensure that switch is free of obstructions and the lid is firmly closed.
The kettle will not turn off if the switch is constrained or if the lid is opening.
NOTE: Operate carefully when pouring the water from your kettle as boiling water
may result in scald, besides, don’t open the lid while the water in the kettle is hot.
5. Lift the kettle from the power base and then pour the water.
5

6
NOTE: Ensure power supply is turned off when kettle is not in use.
6. The kettle will not re-boil until the switch is pressed again. The kettle may be
stored on the power base when not in use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil-dry
protection will automatically switch off the power. If this occurs, allow the kettle
to cool before filling with cold water to re-boil.
CLEANING AND MAINTENANCE
Always disconnect the appliance from the power outlet before cleaning.
1. Never immerse the kettle, power cord or power base in water, or allow
moisture to contact with these parts.
2. Wipe the appearance of body with a mild and damp cloth or cleaner, never
use the toxic cleaner.
CAUTION: Do not use chemical, steel, wooden or abrasive cleaners to clean the
outside of the kettle so as to prevent the gloss loss.
3. When the kettle not in use, you shall store the power cord in the cord storage
of the base.

7
REMOVEL OF MINERAL DEPOSITS
Your kettle should be periodically descaled by virtue of the mineral deposits in
tap water may form scale on the bottom of kettle so as to cause the efficiency
of operation less. You can use the commercially available descaler and follow
the instructions on the package of descaler. Alternatively, you may follow the
instructions as below to use the white vinegar.
1. Fill the kettle with 3 cups of white vinegar, then adding water to the amount
so as to cover the bottom of kettle completely. Leave the solution in the kettle
overnight.
2. Then discard the mixture in the kettle, filling the kettle with clean water,
boiling and then throw it away. Repeat several times until the odor of vinegar
has been flushed away. Any stains remaining inside the spout can be removed
by rubbing with a damp cloth.
WARRANTY CLAIM PROCEDURE
To ensure quick processing of your case, please observe the following instructions:
Please have the till receipt and the item number (S/N: 12345) available as proof
of purchase.
You will find the item number as a sticker on the rear or bottom of the appliance.
If malfunctions or other defects occur, please contact our customer service listed
either by telephone or by email.
If you request any further assistance, please contact us:
Customer service: 1-888-965-8032
[e-mail]

This product must not be disposed together with the domestic waste. This product
has to be disposed at an authorized place for recycling of electrical and electronic
appliances. By collecting and recycling waste, you help save natural resources, and
make sure the product is disposed in an environmental friendly and health way.
ENVIRONMENT FRIENDLY DISPOL
8

Register your product at www.bonsenkitchen.com
to get more perks!
: 5805C Peachtree Corners East
Norcross, GA, 30092
: 1-888-965-8032
: [email protected]
Follow us @bosenkitchen
Bonsen Electronics Inc.