boo bee Original User manual

boo bee original
www.boobee.com.au
USER
MANUAL
PLEASE READ THE CONTENTS
OF THIS GUIDE BEFORE USING
OR OPERATING THIS PRAM.
INSERT
PICTURE
OF
PRAM

boo bee original
www.boobee.com.au

boo bee original
www.boobee.com.au
safety precautions
IMPORTANT! Before assembling this stroller, please ensure you have fully read and understood
the instructions in this guide. Incorrect assembly may make the stroller unsafe. Do not use this
stroller if any part is damaged, defective, torn or missing. Keep these instructions in a safe place
for future reference.
WARNING! ALWAYS FOLLOW THE MANUFACTURER’S INSTRUCTIONS. PUT ON ALL THE BRAKES
WHENEVER YOU PARK THE STROLLER. USE THE TETHER STRAP AT ALL TIMES TO PREVENT THE
STROLLER ROLLING AWAY. DO NOT LEAVE CHILD UNATTENDED. DO NOT ADD EXTRA CHILDREN,
BAGS OR WEIGHT THAN THAT PERMITTED. TO MINIMISE RISK PLEASE ENSURE CHILDREN ARE
CLEAR OF ANY MOVING PARTS AT ANY TIME.
Check that all safety locks are engaged before placing a child in the stroller.
Ensure the child is secured with a correctly adjusted safety harness.
Do not allow children to stand on the seat.
Do not hang bags or goods from the handle as this could cause the stroller to tip over.
Do not place more than 3kg in the basket or 1kg in the hood pocket (where supplied).
The weight of the child using the product should not exceed 17kg.
Use original accessories and manufacturer approved parts only.
Never ride with more than one child in the stroller.
Always use safety locks.
Promptly replace worn, broken or defective parts.
Remove the child from the stroller before going up or down stairs and escalators.
Do not make any changes or alternations to this product, unless through an approved service agent.
To avoid the risk of suffocation, keep all plastic packaging materials out of reach children.
Due to variations in the style and design of our products, the photographs and illustrations shown in this instruction manual are
generic; Therefore product fabrics, colour and design may vary from images shown. Boo Bee reserves the right to alter product
specifications without notice as a result of our ongoing policy of product improvement.
Copyright © 2011. All Rights Reserved.
Nelson Conglomerate Pty Ltd Trading As Boo Bee

boo bee original
www.boobee.com.au
contents
Welcome and Thank You!
What’s in the Box?
Features and Specifications
Assembly Instructions
Product Care and Maintenance
Warranty Terms and Conditions
Customer Service

boo bee original
www.boobee.com.au
welcome & thank you
Congratulations on the purchase of your new Boo Bee Original Pram. This
product has been designed with an emphasis on safety, comfort, strength,
durability, functionality and reliability.
We hope your Boo Bee pram meets all your expectations and requirements
and we thank you for supporting a new Australian brand.

boo bee original
www.boobee.com.au
what’s in the box?
Check what you have received matches the list below. If you find any
discrepancies in the contents, damaged or defective goods, immediately
contact the store of purchase or Boo Bee head office on 07) 3103 3300.
1x Trendy Boo Bee Original Stroller Frame
1x Chair
1x Foot cover
1x Rain cover
2x Turning Swivel Wheels (supplied loose in the box)
2x Race wheels for the back (supplied loose in the box)
1x Axle connecting race wheels to rear of frame (supplied loose in the box)
1x Leg which sticks the swivel wheels onto the front of the pram
1x Bumper Bar (adds protection when dad decides to ‘spin the wheels’)
1x Adaptor set to attach the seat onto the pram frame
1x Paparazzi-Proof Celebrity Hood

boo bee original
www.boobee.com.au
features and specifications
Features
2-in-1 Stroller and Pram
Suitable for child from birth up to 17kg
Light weight, anodized aluminium frame and rigid design
Unique and revolutionary easy folding system
Double fold frame provides super compact fold design
Inbuilt wheel suspension with shock-proof technology for added
comfort and safety
Highly manoeuvrable front swivel wheels with locking system
Reversible seat with premium deluxe, stain-proof washable padded
fabric
5-Point secure harness
Multi-adjustable backrest and soft padding for extra comfort
Height adjustable handlebar
Adjustable footrest and reclined backrest position
Stylish Shopping basket
Fitted with padded safety tether strap
Matching foot cover and rain cover included
Ideal 3-in-1 travel system in combination with car seat, sport seat
and carrycot (adaptors included)

boo bee original
www.boobee.com.au
features and specifications
Specifications & Certifications
Brand
Boo Bee
Model
Original
Colour
BBO Candy
Folded Dimensions
93cm x 61.5cm x 57cm
Expanded Dimensions
112cm x 61.5cm x 83cm
Product Nett Weight
10.5kg
Carton Dimensions
50.5cm x 21.5cm x 84cm
Packaged Gross Weight
12.0kg
Manufacture Date Code
4410
Purchase Order No.
JY10307-BB001
Quantity
1PC/CTN
Warranty
12 Months
This product has been designed and manufactured to meet or exceed the
equivalent Australian and New Zealand standard AS/NZS2088:2000. This
product is produced in accordance with the new European Safety Standards
ensuring maximum safety and comfort for your child, achieving EN 1888
Certification Approval. ISO9001:2000 Certified.
Boo Bee reserves the right to alter product specifications without prior notice as
a result of our ongoing commitment to product improvement.
Engineered and Tested in Australia. Assembled in P.R.C.
EN 1888
APPROVED

boo bee original
www.boobee.com.au
assembly instructions
Step 1. Install the front swivel wheels.
A. Insert front wheel leg assembly into frame
until it locks.
B. Insert one of the smaller wheels as shown
until a click sound is noted. Repeat for other
side.
C. To lock front wheel push button down.
D. To release wheels press button.

boo bee original
www.boobee.com.au
assembly instructions
Step 2. Install the rear wheels.
A. Push large wheel onto rear axle as shown.
B. Insert rear wheel axle group into the frames
rear legs.
C. To release wheels from axle press button on
centre of wheel and remove.

boo bee original
www.boobee.com.au
assembly instructions
Step 3. Now unfold the pram.
A. Press red button on side of pram to release
folded lock position.
B. Place foot on foot rest located on right side
of axle, then lift handlebar until pram clicks
in open lock position.
C. Once open position is locked, press down
release button for further secure lock.
WARNING! If lock release button is not protruding,
your pram is not unfolded completely.

boo bee original
www.boobee.com.au
assembly instructions
Step 4. Install the adaptors.
A. Once pram is in open position, insert the
adaptors into the side notch holes situated
on each side of the pram.
B. Be sure to push into notch holes until a click
sound indicates lock position. To release,
press button in centre.

boo bee original
www.boobee.com.au
assembly instructions
Step 5. Adjust the handlebar height.
A. Press button situated in centre of
handlebar to adjust to height preference.

boo bee original
www.boobee.com.au
assembly instructions
Step 6. Fold the stroller.
A. Turn up the lock release button.
B. Pull the red release lever located on left
side of handlebar toward you, hold, and
return to the lock release button on frame
under chair and press forward to release
pram back into fold position.
WARNING! To fold pram the chair must be
facing away from handlebar.

boo bee original
www.boobee.com.au
assembly instructions
Step 7. Install the seat.
A. Align chair with the adaptors until a click
sound is heard.
B. To remove the chair lift the red buttons on
the adaptors and raise chair.

boo bee original
www.boobee.com.au
assembly instructions
Step 8. Install the bumper bar.
A. Click bumper bar into sockets provided on
chair.
B. To release bumper bar, press buttons.

boo bee original
www.boobee.com.au
assembly instructions
Step 9. Adjust the footrest.
A. Press buttons on either side of footrest to
move up or down.

boo bee original
www.boobee.com.au
assembly instructions
Step 10. Adjust the backrest and harness.
A. Hold the backrest adjustment belt and
press button to release or tighten.
B. Button must be held down to move strap
up or down.
C. Undo the zipper on back side of chair to
adjust harness straps to desired height for
your babies age.

boo bee original
www.boobee.com.au
product care and maintenance
Cleaning
To ensure the long-lasting use of your stroller, dry it with a soft absorbent
cloth after use in rainy weather or wet conditions. Use a damp cloth to clean
the frame. Do not use abrasive cleaners.
After using your stroller on the beach or in sandy conditions, clean the
frame and wheels thoroughly with water to remove the sand and salt. Allow
it to dry thoroughly.
All fabric covers and trims may be cleaned using a damp cloth with soap or
mild detergent and are also machine washable. Allow it to dry completely
before folding or storing it away.
Do not clean, or use bleach on fabrics or trims. Do not tumble or spin dry,
unless the care label on the product permits these methods.

boo bee original
www.boobee.com.au
product care and maintenance
Maintenance
Check stroller regularly to ensure that locking devices and components are
secure and working properly. Always check parts regularly for tightness of
screws, nuts and other fasteners- tighten or replace if required.
To maintain the safety of your stroller, seek prompt repairs for bent, torn,
worn or broken parts. Use only those parts and accessories approved by Boo
Bee.
If the wheels squeak, use silicone based spray or light oil ensuring it
penetrates the wheel and axle assembly.
To prevent mould or mildew, do not fold or store the product if it is damp or
wet. Allow it to dry thoroughly. Always store the product in a well ventilated
area and away from direct sunlight.