Baby Trend Navigator DJ86 B Series User manual

DJ86XXXB_2L_020123.1
1-800-328-7363
(8:00 a.m. ~ 4:30 p.m. PST)
www.babytrend.com
Baby Trend, Inc.
13048 Valley Blvd.
Fontana CA 92335
Instruction Manual
Manual de Instrucciones DJ86xxxB
Read all instructions BEFORE assembly and USE of product.
KEEP INSTRUCTIONS FOR FUTURE USE.
Lea todas las instrucciones ANTES de armar y USAR el
producto. CONSERVE LAS INSTRUCCIONES PARA USO FUTURO.
Navigator®Lite Double Jogger

WARRANTY
DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT
BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.
The Baby Trend® warranty covers workmanship defects within 1 year of purchase.
Any product which has been subjected to misuse, abuse, abnormal use, excessive
wear and tear, improper assembly, negligence, environmental exposure, alteration or
accident, or has had its serial number altered or removed invalidates all claims against
the manufacturer. Any damage to property during installation is the sole responsibility
of the end user.
Customer Service Department can be contacted at 1 [phone] Monday through
Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required
prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/
limited-warranty for complete warranty details.
GARANTIA
NO DEVUELVA SU PRODUCTO A LA TIENDA. POR FAVOR CONTACTE A
BABY TREND® PARA PIEZAS DE REPUESTO, SERVICIO Y REPARACION.
La garantía de Baby Trend® cubre defectos de fábrica por 1 año después de la
compra. Cualquier producto que haya sido sometido a uso inadecuado, abuso, uso
anormal, desgaste excesivo, montaje incorrecto, negligencia, exposición ambiental,
alteración o accidente, o cuyo número de serie haya sido alterado o removido, anula
todos los reclamos contra el fabricante. Cualquier daño a la propiedad durante la
instalación es la exclusiva responsabilidad del usuario final.
El Departamento de Servicio al Cliente está disponible llamando al 1 [phone],
de lunes a viernes de 8:00 a.m. a 4:30 p.m. (PST). Se requiere una Autorización de
Devolución antes de poder devolver el o los productos a Baby Trend®. Visite http://
babytrend.com/pages/limited-warranty para conocer todos los detalles de la garantía.
Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335
1-800-328-7363 • (8:00am ~ 4:30pm PST)
www.babytrend.com

WARNING
2
PARTS
1Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Check that you have all the parts for this model before assembly.
* Wheel styles may vary.
Parent Tray
Parent Tray Screws Fender Screws
Stroller
Axel NutsRetainer plates
Bumper Bars (2)
*Front Wheel *Rear Wheels
Fender
WARNING: Please follow all of these instructions
to ensure the safety of your child. Keep these
instructions for future reference.
WARNING: Failure to follow these instructions
could result in serious injury or death. Avoid serious
injury from falling or sliding out. Always use the safety
harness and ensure that the children are properly
positioned according to these instructions.
WARNING: Never leave children unattended.
WARNING: Wheel can detach and cause the
Jogger/Stroller to tip over. Pull on the wheel to assure it
is securely attached.
• CAUTION: This double jogger is designed for two children of equal/close weights. Use with one
child may cause the unbalance condition which can injure/ harm your child.
• Purses, shopping bags, parcels, diaper bags or accessory items may change the balance of the
stroller and cause hazardous unstable conditions.
• Always lock the front swivel wheel in STRAIGHT position before placing or removing your children
from the stroller and when walking fast or jogging.
• The maximum weight that can be carried in the basket is 5 lbs (2.26 kg), child tray and parent tray
are 3 lbs (1.36 kg) each. The maximum weight can be carried in the side pockets (2) is 3 lbs (1.36
kg), back pockets (2) is 3 lbs (1.36 kg) and canopy pockets is (2) 1 lb (0.45 kg). Excessive weight may
cause a hazardous unstable condition to exist.
• Be certain the stroller is fully erect and latched in the open position before allowing children near
the stroller.
• Use of the stroller with children weighing more than 50 pounds (22.62 kg) each (no more than 50
pounds (22.62 kg) per seat), or more than 100 pounds (45.25 kg) in total, or over 42 inches (106.7
cm) tall, will cause excessive wear and stress on the stroller and may cause a hazardous unstable
condition to exist.
• NEVER use the stroller on stairways or escalators.
• NEVER use the stroller with roller skates, in-line skates, skateboards or bicycles.
• We recommend that the child occupant be at least 6 months of age prior to use of the stroller for
jogging. Because children develop at different rates, please discuss the use of a jogging stroller with
your health care provider prior to jogging with your child.
• NEVER allow your stroller to be used as a toy.
• To clean use only mild household soap or detergent and warm water on a sponge
or clean cloth.
**Compable with the Baby Trend Infant Car Seats:
Flex-Loc 30, EZ-Flex Loc 30/32, and Secure.
Not compable with: Ally, EZ-Li, EZ-Li PLUS, EZ-Li PRO,
Secure-Li Infant Car Seats.

ASSEMBLY
4
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
WARNING
3Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
• Check your stroller for loose screws, worn parts, torn material or stitching on a regular basis.
Replace or repair parts as needed.
• Discontinue use of stroller should it malfunction or become damaged. Please contact our customer
service Parts Hotline to arrange for repair or obtain replacement parts.
• Door way needs to be 36" or more to fit through when open.
IMPORTANT! To ensure safe operation of your
stroller, please follow these instructions carefully. Please keep
these instructions for future reference.
IMPORTANT!Before assembly and each use,
inspect this product for damaged hardware, loose joints,
missing parts or sharp edges. NEVER use if any parts are
missing or broken.
IMPORTANT!Adult assembly is required. Keep
child away during unpacking and assembly.
Remove stroller from box. The front wheel
and rear wheels MUST be installed prior
to use.
FENDER
If assembly is necessary
(Fig. 1a), see Fender page 20.
FRONT WHEEL
To attach the front wheel, unfold stroller as
described in the section following:
1) • Unlock the release lever (Fig. 1a) and
unfold stroller frame by pulling upward on
the stroller handle unl the frame locks
(Fig. 1b).
2) • Slide the front wheel onto the front fork
(Fig. 2).
3) • Slide the retainer plate onto the front
wheel. Be sure that the raised lip is poinng
toward the fork and insert it into the slot on
the fork. The tab on the retainer plate must
be lined up with the slot before ghtening
the wheel (Fig. 3). Fig. 2
Fig. 3
Retainer Plate
Axel Nut
Axel and Hub
Front Fork
Slot
Fig. 1b
Fig. 1a

ASSEMBLY ASSEMBLY
56
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 4
Fig. 5a
Fig. 5b
4) • With the wheel in posion, ghten the axel
nuts and ghten with standard crescent,
box, or open end wrench. You should feel
signicant resistance and the wheel should
be held ghtly in place (Fig. 4).
REAR WHEELS
5) • Rest the stroller upside down, on the handle.
• Press the rear wheel posts into the rear
frame hub unl it clicks into place
(Fig. 5a).
NOTE: Pull on the rear wheel to ensure that it
is securely aached to the stroller.
• To remove the rear wheels, press the wheel
release buon (Fig. 5b) on the rear tube and
pull the wheel from the hub.
TIRES
6) • Tires are shipped un-inated. The res
should be inated on a regular basis to the
P.S.I. specied on each re. Always use a
bicycle style hand air pump to inate the
res. *Not included (Fig. 6).
Fig. 6
PARENT TRAY
WARNING:Do not
place hot liquids or more
than 3 pounds in the
parent tray. Serious burns
or unstable conditions
could result.
7) • To aach parent tray: Snap the upper
poron of the tray over the handle (Fig
7a).
• Aach the lower poron of the parent
tray to the cross tube, with the screws
provided (Fig. 7b).
NOTE: Check to make sure the parent
tray is secure before using.
Fig. 7a
Fig. 7b
Fig. 8a
Fig. 8b
CANOPY
8) • To open the canopy: push forward
on the front edge of the canopy. Push
downward on the tensioners to secure
(Fig. 8a).
• To fold the canopy: pull upwards on the
tensioners and then pull backwards on
the front edge (Fig. 8b).

SAFETY
8
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
ASSEMBLY
7Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
SEATBACK POSITIONING
9) • To recline the seat: loosen the strap
through the buckle and adjust to the
required recline posion (Fig. 9a). To place
the seat back in a more upright posion,
press upward on the seat back with one
hand while pulling the strap through the
buckle with the other (Fig. 9b).
NOTE: The upright posion should be
used only for a child that is at least 6
months old. Always re-adjust the safety
harness, including the shoulder belts,
when reposioning the seat back.
BUMPER BAR
WARNING: Do not
use bumper bar to carry
seat with child inside.
The bumper bar is not a
carrying handle.
10) • Aach the bumper bar by lining up
anchors with the slots on the seat. Push
unl it locks into place (Fig. 10a).
NOTE: The bumper bar must be securely
aached before using this product.
• To detach bumper bar, press the release
buon on the boom of the bar and pull
bar out of the anchor. Swing the bar out
to access the seat (Fig. 10b).
Fig. 9b
Fig. 9a
Fig. 10a
Fig. 10b
11) • To engage brakes, apply downward pressure
to the brake levers located on the rear axle.
The stroller may require forward or rearward
movement in order to engage the brake (Fig.
11). Check that the stroller will not move
once the brakes are properly applied. To
release, gently li up on the brake levers.
FRONT WHEEL LOCK
WARNING: Always
lock the front swivel wheel
in STRAIGHT position before
placing or removing your
children from the stroller and
when walking fast or jogging.
FALL HAZARD:
Prevent tipping over, before
running, jogging or walking
fast, LOCK the front wheel
from swiveling.
12) • The front wheel is equipped with a swivel
locking device and can lock the wheel in the
front or back posion (Fig. 12a).
• Push the buon on the wheel upward to
engage the locks and push downward to
disengage the locking device (Fig. 12b).
BRAKES
WARNING:Always set brakes
when the stroller is not being pushed
so that the stroller will not roll away.
NEVER leave stroller unattended on a
hill or incline as the stroller may slide
down the hill.
Fig. 11
Fig. 12b
Fig. 12a
Lock
Unlock

SAFETY SAFETY
910
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Type 1 and 2
13) • The shoulder straps of the 5-point harness
have 3 aachment posions (Fig. 13a). Select
the posion that places the shoulder strap
level with, or below, the top of the child’s
shoulder (Fig. 13b).
•Carefully place the child in the stroller seat
and bring the safety harness around the
child’s waist and over the shoulders. Place the
crotch strap between the child’s legs. Insert
the male end of each shoulder/waist belt into
the buckle on the crotch strap. Tighten the
harness to be snug around the child’s waist
and over the child’s shoulders (Fig. 13c).
TO SECURE THE CHILD
WARNING: Avoid
serious injury from falling or
sliding out. Always use the
safety harness.
STRANGULATION
HAZARD: Child can
strangle in loose straps. Never
leave child in seat when straps
are loose or undone.
Fig. 13c
Fig. 13b
Fig. 13a
Shoulder Strap
Squeeze
Waist Strap
Crotch Strap
Adjust for a snug t
Type 2 Buckle
Adjust for a snug t
Type 1 Buckle
Fig. 13a
TO RELEASE THE CHILD
Type 1
14) • To release, push Buon on Center Clasp,
the two Harness Buckles will pop
free (Fig. 14).
Type 2
15) • To release, apply pressure to both sides
of each male clip unl the clip is released
(Fig. 15).
Fig. 14
Center Clasp
Type 1
Fig. 15
Type 2

INFANT CAR SEAT
12
12
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
SAFETY
11 Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
• When you are jogging with your child, use the following safety features:
16) • LOCK THE FRONT SWIVEL WHEEL IN STRAIGHT POSITION (Step 12)
• SAFETY WRIST STRAP: Always connect the safety strap to either wrist when
jogging. This strap will keep the stroller from rolling away in the event that you trip
while running (Fig. 16a). The safety strap must remain connected to the rear lower
frame cross member at all mes. This locaon is intended to prevent the stroller
being pped backward in the event that you do fall to the ground. The safety strap
includes a hook and loop aachment for storage, on the le side of the stroller,
when not in use (Fig. 16b).
JOGGING WITH YOUR STROLLER
WARNING: Never jog or run
with your newborn in the car seat
position. Use for strolling only.
STRANGULATION
HAZARD! Children have
strangled when straps have wrapped
around their neck. When not in use
hook the tether strap onto the stroller
handle. Keep this stroller tether strap
out of the reach of children.
Fig. 16b
Fig. 16a
17) • Posion the infant car seat so that it
faces toward the rear of the stroller
and the car seat base hooks lock
onto the bumper bar (Fig. 17a).
NOTE: Check that the bum per bar
is rmly aached to the stroller.
• A djust the seat back to its most
upright position ( Fig. 17b) .
• Strap both short clips over the infant
car seat, through both seat belt slots
(Fig. 17c).
NOTE: Make sure both short clips
are ghtly fastened to the infant car
seat before use.
Fig. 17a
Fig. 17b Fig. 17c
Short clips
COMPATIBLE CAR SEATS
Compable with the Baby Trend Infant Car Seats: Flex-Loc 30, EZ-Flex Loc
30/32, and Secure.
Not compable with: Ally, EZ-Li, EZ-Li PLUS, EZ-Li PRO, Secure-Li
Infant Car Seats.

FOLD / UNFOLD
14
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
INFANT CAR SEAT
13
13 Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
Fig. 18
TO REMOVE INFANT
CAR SEAT
18) • To remove the Infant Car Seat, unstrap
the short clips from each belt slot and
squeeze the release handle located at
the foot-end of the seat and carefully
li upward on the seat (Fig. 18).
NOTE: Raise the support tabs when
the car seat is not in use.
TO FOLD STROLLER
WARNING: Care
must be taken when folding
and unfolding the stroller to
prevent nger entrapment.
CAUTION: Do not allow
children near stroller while
folding.
19) • Close the canopy as described in the
canopy secon (step 8). Place the seat in
the furthest recline posion.
• Fold the stroller by pulling both release
triggers (Fig. 19a). Press downward on the
stroller handle unl the stroller is completely
folded. Lock the release lever on the right
side of the stroller (Fig. 19b).
TO UNFOLD STROLLER
CAUTION: Do not allow
children near stroller while
unfolding.
20) • Unlock the release lever (Fig. 20a) and
unfold stroller frame by pulling backward
on the stroller handle unl the frame locks
(Fig. 20b) .
Fig. 19a
Fig. 19b
Fig. 20a
Fig. 20b

MAINTENANCE MAINTENANCE
15 16
Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Copyright © 2023, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados.
CARE AND MAINTENANCE
TESTING FOR PROPER WHEEL INSTALLATION
WARNING: ALWAYS
check the double nut locking
system before each use to
ensure that the front wheel
is securely fastened to the
frame.
21) • Li front end of the stroller up and pull
down on wheel to ensure its aached
(Fig. 21).
NOTE: The wheel must not detach.
If you experience front wheel wobble
that is beyond what is normal for use
while walking or jogging you may have
to adjust the front wheel housing nut.
22) • Reverse (Fig. 23a). Remove fender to
access nut. You can use a standard crescent
wrench to ghten the nut
(Fig. 22).
DO NOT OVER TIGHTEN this can cause the
front wheel to not swivel properly and will
result in damage to the wheel housing.
When ghtened correctly, the front fork
will have only a slight drag when manually
rotated. Wheel and fork should not rotate
freely. When adjusng the front wheel,
always test the fork for a slight drag.
Fig. 21
Fig. 22
FENDER
If adjustment or replacement is necessary:
23) • Line up the front fender and press onto the
front frame assembly (Fig. 23a).
• Insert the 4 screws through the underside
of the front frame assembly into the front
fender’s plasc tubes. Tighten the screws
only unl snug (Fig. 23b).
DO NOT OVER TIGHTEN.
SEAT PAD
• To clean the seat pad, use only mild
household soap or detergent and warm
water on a sponge or clean cloth.
OTHER
• Check your stroller for loose screws, worn
parts, torn material or stching on a regular
basis. Replace or repair parts as needed.
Fig. 24b
Fig. 23a