Boogie Lockholder Instruction sheet

Lockholder Install
www.boogiebikes.com
1-833-266-4432 11
www.boogiebikes.com
1-833-266-4432

2
www.boogiebikes.com
1-833-266-4432
L O C K H O L D E R I N S T A L LL O C K H O L D E R I N S T A L L
1. Open your package and
check to ensure all the parts
needed are included:
In addition, a phillips-head
screwdriver is required

3
www.boogiebikes.com
1-833-266-4432
L O C K H O L D E R I N S T A L L
1
2
3. Remove the four small screws on the
corners of the Lock Carrier, seperating
the piece into three parts: Carrier (1) and
Foot Brackets (2)
1
2
Note: the
screws are
short so hold
onto them
when
unscrewing!
Foot
Brackets
Screws
Carrier
Lock Clamp
Lock Carrier
2. Seperate the top and bottom pieces of the
lockholder by turning the top screw
counterclockwise

4
www.boogiebikes.com
1-833-266-4432
L O C K H O L D E R I N S T A L L
4. Turn off and remove Battery, then place
one Foot Bracket face-up on the middle bar
(the holes for the screws should be visible)
5. Place Carrier on top of middle bar so that
the two screw-holes are lined up with
those on the grip underneath

5
www.boogiebikes.com
1-833-266-4432
L O C K H O L D E R I N S T A L L
6. Place screws in and tighten with screwdriver
7. Repeat steps 4 and 6 by placing the second
Foot Bracket underneath the middle bar, lined
up with the Carrier, then fasten final two screws
in place

6
www.boogiebikes.com
1-833-266-4432
L O C K H O L D E R I N S T A L L
Note: the middle section of the battery
may need to be moved so that it rests on
the mount as seen in the picture, this ensures
that the top piece will fit on top
8. Place Lock on mount
9. Fasten Lock Clamp
back onto mount
by twisting in screw

7
www.boogiebikes.com
1-833-266-4432
L O C K H O L D E R I N S T A L L
10. Ensure that lock is secure and enjoy!