Bosch TES?712 Series User manual

en Instruction manual
fr Mode d’emploi
nl Gebruiksaanwijzing
pl Instrukcja obsługi
cs Návod k použití
ru Инструкция по эксплуатации
TES 712.. / TES 715..
Register your new Bosch now:
www.bosch-home.com/welcome

E-Nr. ……… FD… …
A
TES715
2
3
1
4
5 6 7
Included in delivery (see page 5)
Contenu de l’emballage (voir page 31)
De verpakking bevat (zie pagina 57)
Zakres dostawy (patrz strona 83)
Rozsah dodávky (na straně 110)
Объем поставки (см. стр. 136)
en English 2
fr Français 28
nl Nederlands 54
pl Polski 80
cs Čeština 107
ru Pycckий 133

Espresso Ë Í
 à À Á Å Æ
B
23
2827 6
9
10
1
11
5
2
5a
3
4
8
7
4
12
25
18
15
17
16
19
TES715
26
5b
5c

1410c 10d
C
D E
23b
24
23c
23a
10c
10d
13
10a
10b

1410c 10d
C
D E
23b
24
23c
23a
10c
10d
13
10a
10b
F
20a
20a
20a
20b
20
21
19
22

2
Robert Bosch Hausgeräte GmbH
en
Contents
Dear Coffee Connoisseur,
Congratulations on purchasing this fully
automatic espresso machine from Bosch.
These operating instructions describe vari-
ous appliance designs, which differ in detail.
Each appliance is assigned an E-number,
e.g. TES712. The E-No. of the respective
appliance can be found on the packaging or
rating label 25.
Please also refer to the quick reference
guide. This can be kept in a special storage
compartment 22 until the appliance is used
again.
Safety instructions ......................................3
Included in delivery .....................................5
At a glance..................................................5
Before using for the rst time......................6
Controls ......................................................7
Displays ......................................................9
Display settings ........................................10
Customising .............................................. 11
Child-proof lock.........................................12
Menu settings ...........................................13
Preparation using coffee beans ................15
Preparation using ground coffee .............16
Preparing milk froth and warm milk ..........17
Dispensing hot water ................................17
Maintenance and daily cleaning ...............18
Service Programmes ...............................20
Tips on energy saving ..............................24
Frost protection ........................................24
Storing accessories ..................................25
Accessories ..............................................25
Disposal ....................................................25
Guarantee.................................................25
Technical specications ............................25
Simple troubleshooting .............................26

3
TES7.. | 08/2013
en
Safety instructions
Please read and follow the operating instructions carefully and
keep them for later reference. Enclose these instructions when
you give this appliance to someone else. This appliance is
designed for the preparation of normal household quantities in
the home, or in household-like, non-commercial environments.
Household-like environments include staff kitchens in shops,
of ces, agricultural and other small businesses or for use by
guests at bed-and-breakfast establishments, small hotels and
similar residential facilities.
¡Danger of electric shock!
Connect and operate the appliance only according to the type plate
speci cations. To avoid potential hazards, repairs such as replacing
a damaged cable must only be carried out by our customer service
personnel.
This appliance may be used by children aged 8 years and older and
by persons with reduced physical, sensory or mental capabilities
or who lack experience and/or knowledge if they are supervised or
have been given instruction in the safe use of the appliance and
have understood the dangers involved. Keep children under 8 years
of age away from the appliance and connecting cable and do not
allow them to use the appliance. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children unless they are older than 8 years and supervised.
Never immerse the appliance or mains cable in water. Use only if
power cord and appliance show no signs of damage. Should a fault
occur, pull the plug or disconnect from the mains immediately.

4
Robert Bosch Hausgeräte GmbH
en
¡Risk of suffocation!
Do not allow children to play with packaging material.
¡Risk of scalding!
The milk frother 10 for milk/hot water gets very hot. After use, allow to
cool down rst before touching.
¡Risk of injury!
Do not reach into the grinding unit.
ONLY TES715
¡Warning!
The cup warmer 27 gets very hot!

5
TES7.. | 08/2013
en
1Power on/off switch O/ I
2 Customising button á
3Service programmes button à
4Selection buttons <>
5 Display
a) Status line
b) Selection line
c) Navigation line
6Rotary knob for display settings
7Info menu button j
8start button (drinks/programmes)
9Coffee outlet,
height-adjustable and swivelling
10 Milk system,
height-adjustable and removable
(milk/ hot water)
a) Upper part
b) Lower part
c) Suction hose
d) Suction pipe
11 Removable water tank
12 Lid for water tank
13 Storage compartments
(measuring spoon and milk frother
accessories)
14 Measuring spoon
(insertion aid for water lter)
15 Bean container
16 Aroma cover
17 Selector for grind setting
18 Powder compartment
(ground coffee/cleaning tablet)
19 Door to brewing unit
20 Brewing unit
a) Lock
b) Cover
21 Sliding button
22 Storage compartment for quick
reference guide
23 Drip tray
a) Panel
b) Grate
c) Coffee grounds container
24 Cable storage compartment
25 Rating label (E-No.; FD)
ONLY TES715
26 Milk container
27 Cup warming function
28 Button for cup warming function,
illuminated
Included in delivery
(Figure A on the fold-out pages)
1Fully automatic espresso machine
TES712/TES715
2Instruction manual
3Quick reference guide
4Milk frother
5Water hardness testing strip
6Measuring spoon
ONLY TES715
7Milk container
At a glance
(Figures B, C, D, E and F on the fold-out pages)

6
Robert Bosch Hausgeräte GmbH
en
Before using for the
rst time
General
Fill the water tank with pure, cold, uncar-
bonated water only and preferably use only
beans or coffee blends suitable for fully auto-
matic espresso and coffee machines. Do
not use coffee beans that have been glazed,
caramelised or treated with other additives
containing sugar, since they will block the
brewing unit.
The water hardness setting can be adjusted
on this appliance. The factory setting for the
water hardness is 4. Check the hardness
of the water you use with the enclosed test
strip. If a value other than water hardness
4 is displayed, change the setting on the
appliance accordingly after switching on
(see “Menu settings – Water hardness”).
Setting up the appliance
●Place the fully automatic espresso machine
on a at, water-resistant surface that can
take its weight.
Important: Only use the appliance in frost-
free rooms . If the appliance has been trans-
ported or stored at temperatures below
0 °C, wait at least 3 hours before operation.
●Pull out the mains plug from the cable
compartment 24 and plug it in. Adjust the
length of the cable by pushing it back in
and pulling it out. To do this, place the
appliance with its back ush with the edge
of the work surface and either pull the
cable downwards or push it upwards.
●Lift the lid of the water tank 12.
●Remove and rinse the water tank 11 and
ll it with fresh, cold water. Do not ll
above the “max” mark.
●Replace the water tank 11 and push it
rmly downwards into place.
●Close the water tank lid 12 again.
●Fill the bean container 15 with coffee
beans.
●Press the power switch 1O/I. The
start button 8lights up and the different
languages appear in the display 5.
The following languages can be selected:
TES7.. DE
Deutsch English
Français Italiano
TES7.. RW
English Русский
Nederlands Français
Italiano Svenska
Español Polski
Українська Magyar
Türkçe Dansk
Norsk Suomi
Português Čeština
Ελληνικa
● Use the buttons <and >4to select the
language in which you want the display
texts to appear
.
The selected language is highlighted.
●Press the start button 8. The language
you selected is saved.
●The brand logo lights up in the display 5.
The appliance now heats up and rinses.
Some water will run out of the coffee
outlet 9.

7
TES7.. | 08/2013
en
●The appliance is ready for use when the
symbols for the drink selection and the
start button 8light up in the display 5.
Espresso
ËË
Í
 à À Á Å Æ
Info: The factory settings of the fully auto-
matic espresso machine are programmed for
optimal performance. The appliance switches
off automatically after a specic time (see
“Menu settings – AutoOffafter”).
Note: If the appliance is being used for the
rst time, the service programme has been
run
, or the appliance has not been oper-
ated for a long period, the rst beverage will
not have the full Aroma and should not be
consumed.
When the fully automatic espresso machine
is rst used, you will achieve a suitably thick
and stable “crema” only after the rst few
cups have been dispensed.
Controls
Power on/off switch O/I
The power on/off switch 1O/I is used to
switch the appliance on or off. The appliance
rinses automatically when it is switched on
and off.
The appliance will not rinse if:
● it is still warm when switched on.
●there was no coffee drawn before
switching off.
The appliance is ready for use when the
symbols for the drink selection and the start
button 8light up in the display 5.
Customising button á
The appliance provides the option of sav-
ing and calling up customised settings for
coffee drinks. Please refer to the section
“Customising” for information on how to
save and call up these settings.
Service programmes button à
Press the àbutton 3 briey to call up the
selection of service programmes. Please
run the programme as described in “Service
Programmes”.
Press and hold to activate or deactivate the
child-proof lock, see “Child-proof lock”.
Rotary knob
Turn the rotary knob 6to the left or right to
navigate through the display 5, or to adjust
parameters in the menu.
Selection buttons <and >
Press the selection buttons 4<and >to
navigate up and down through the menu
levels (navigation line 5c).

8
Robert Bosch Hausgeräte GmbH
en
Display
The display 5uses symbols to indicate the
selection options, coffee strength and per-
cup quantity, and uses text to indicate set-
tings, ongoing processes and messages.
The rotary knob 6and selection buttons
4can be used to change settings . The
selected setting is highlighted by a frame.
Espresso
ËË
Í
 à À Á Å Æ
5a
5b
5c
Example:
The status line 5a shows the name of the
type of drink, along with the strength setting
55 and per-cup quantity Î.
The selection line 5b shows symbols for
drink selection.
The arrows in the navigation line 5c indicate
the direction in which more menu levels can
be found.
Please refer to “Displays” for more detailed
information.
Start button
Press the start button 8to begin drink
preparation or to start a service programme.
Press the start button 8again during drink
preparation to stop the dispensing process
prematurely.
jbutton and settings
Use the jbutton 7 to display information
(press briey) and adjust settings (hold
down for at least 3 seconds).
Displaying information
The following information can be displayed
in the Info menu:
●when should the next service be
completed.
●how many drinks have been dispensed
since the espresso machine was
switched on.
●Press the jbutton 7 briey and navigate
with the <and >buttons 4.
Info
Descale after. 200 À
Clean after 200 À
Change filter in 200 À*
Info
No. of coffees 11
No. of milk mixes 15
Amount hot water 2l
*appears only if the lter is activated.
Press the jbutton 7 briey to return to the
drink selection. If no button is pressed for
about 10 seconds, the appliance automati-
cally switches back to drink selection mode.
Adjusting settings
See “Menu settings”.

9
TES7.. | 08/2013
en
Adjusting the grinding unit
The rotary selector 17 adjusts the grind
settings from coarse to ne.
¡Warning!
Adjust the grinding unit only while it is run-
ning! Otherwise the appliance may be dam-
aged. Do not reach into the grinding unit.
●While the grinding unit is running,
adjust the rotary selector 17 from
ne (a: Turn anticlockwise) to
coarse (b: Turn clockwise).
a b
Info: The new setting will not become
apparent until after the second cup of
coffee.
Note: If the message Please adjust
grinding unit to coarser setting!
appears in the display, the grind setting
for the coffee beans is too ne. Adjust the
grinding unit to a coarser setting.
Tip: For dark roast coffee beans, choose a
ner grind; for lighter beans a coarser grind.
ONLY TES715
Cup warming function
¡Warning!
The cup warmer 27 gets very hot!
The fully automatic espresso machine has
a cup warmer 27 that can be switched on or
off manually with button 28. When the cup
warmer 27 is on, button 28 lights up.
Tip: For optimal cup warming, place the
base of the cups on the cup warmer 27.
Displays
Display messages
Various messages are shown in the
display 5.
Information (only TES715)
For example:
Espresso
ËË
Í
Water tank
almost empty
Prompts
For example:
Espresso
ËË
Í
Refill water tank

10
Robert Bosch Hausgeräte GmbH
en
Display settings
Press the selection buttons <and >4to
select the following selection menus in the
menu levels:
Drink selection
Espresso
Ë
Í
 à À Á Å Æ
Coffee strength (only for coffee drinks)
Espresso
Ë
Í
5 55 555
Per-cup quantity
Espresso
Ë
Í
ÎÐÒ
Select your personal per-cup quantity
Espresso
Ë
Í
Î ± 0 ml
My coffee (only TES715)
My coffee
Ë
Í
Espresso Milk
40%
Turn the rotary knob 6to adjust the
following parameters within the menus:
Settings – Drink selection:
Â2xEspresso
Ã2xCoffee
ÀEspresso
ÁCoffee
ÄCaffe Latte (only TES715)
ÅMacchiato
ÆCappuccino
ÇMy coffee (only TES715)
ÈMilk froth
ÉWarm milk
ÊHot water
Settings – Coffee strength:
åVery mild
åå Mild
ååå Normal
äStrong
ãVery strong
2x åAromaDouble Shot strong
2x ååå AromaDouble Shot strong+
2x ãAromaDouble Shot strong++
AromaDouble Shot:
The longer the coffee is brewed, the
more bitter substances and undesired
Aromas are released. This has a nega-
tive effect on the taste and makes the
coffee less easily digestible. So for extra
strong coffee, the TES7.. has a special
AromaDouble Shot function. When half
the quantity has been prepared, coffee is
ground and brewed again so that only the
pleasant, Aromatic scents are released.
The AromaDouble Shot function can be
selected for all coffee drinks except for
EspressoÀwith a small per-cup quantity,
2x Espresso Âand 2xCoffee Ã.

11
TES7.. | 08/2013
en
Settings – Per-cup quantity
Îsmall
Ðmedium
Òlarge
Settings – Personal per-cup quantity
The preset per-cup quantity Î, Ðor Òcan
be individually adjusted to the size of the
cup in use by turning the rotary knob 6. The
per-cup quantity can be adjusted according
to the drink selected. An arrow in the Ò
symbol in the top right-hand corner of
the display indicates whether the per-cup
quantity was increased or decreased. If you
set for example Coffee Á, the adjustment
of the per-cup quantity in ml, and in the
case of a milk-based coffee drink, for
example CappuccinoÆ, the adjustment of
the per-cup quantity including the volume of
milk (froth) in ml, is indicated.
Important: The selected amount in ml is
an approximate value and can vary sig-
nicantly as a result of crema forming, the
grind setting or the type of milk used, etc.
Settings – My coffee (only TES715)
In addition to selecting coffee strength and
per-cup quantity, you can choose the exact
mix of espresso and milk for your own coffee
setting Mycoffee Ç:
● The setting can be dened in 20 % steps
by turning the rotary knob 6.
Customising
You can store up to 6 user proles in the
User settings menu. The required coffee
and hot water temperatures are saved in
the user proles.
Important: The “Customising” settings
(ábutton 2) are not identical to those
under “Menu settings” (jbutton 7) and vice
versa.
Storing or changing the user
●Hold down the ábutton 2for at least
3 seconds.
The menu appears:
User settings
User 1
 start
User 2
User 3
●Select the required user using the selec-
tion button and press the start button 8.
The following selection appears in the
display:
User settings: User 1
Edit name
 start
Delete name
Coffee temp.
●To change the user name, use the selec-
tion button to go to Edit name  start
and press the start button 8.
The input eld appears in the display:
â ABCDEFGHIJKLMNOPQ
______
Abort Store
●Turn the rotary knob 6to select a letter or
number.
● Conrm by pressing the start button 8.
There are 6 characters available for the
user name.
To delete entries made, select the symbol
âand press the start button 8.
Note:
Press the selection button >to save your
entry. Press the selection button <to cut
the process short.
Info: The entry can be overwritten at any
time.

12
Robert Bosch Hausgeräte GmbH
en
To delete the user, use the selection button
Delete name  start and press the start
button 8.
Saving temperatures
● Use the selection button to select Coffee
temp. or Hot water temp..
●Turn the rotary knob 6to select the
required setting.
●Press the ábutton 2.
The settings are saved.
Calling up a user prole
●Press the ábutton 2 briey.
The user prole menu appears:
Select a profile
Robert User 1 User 2
●Turn the rotary knob 6to select a user
prole and press the start button 8.
The drink selection menu appears:
Macchiato
Ë
Í
Robert À Á Å Æ
● Set the drink, coffee strength, etc. (see
“Display settings”).
●Dispense a drink (see “Preparation using
coffee beans”).
● The selected settings are saved.
●Press the ábutton 2to exit the
customised menu.
Info: If you wish the appliance to exit the
menu automatically, you can set this as
described under “Menu settings – Exit
profile”.
Child-proof lock
The appliance can be locked to protect
children from scalding and burning.
●Hold down the àbutton 3for at least
3 seconds.
The display 5 shows a key; the child-proof
lock is activated.
Espresso
Ë
Í
It is no longer possible to operate the
appliance.
ONLY TES715
The cup warmer 27 is switched off.
●To deactivate the child-proof lock,
hold down the àbutton 3for at least
3 seconds. The key disappears from
the display 5.

13
TES7.. | 08/2013
en
Menu settings
●Hold down the jbutton 7for at least
3 seconds.
The different setting options are now
displayed.
Settings
Coffee temp.
Hot water temp. <85°C
Exit profile
The different setting options can be selected
with the selection buttons <and >4.
Note: The changes you have made are
saved automatically. It is not necessary
to conrm them additionally. If no entry is
made after approx. 2 minutes, the menu will
close automatically.
The following settings can be selected:
Language
●Turn the rotary knob 6to select the
required language.
Coffee temp.
●Turn the rotary knob 6to set the coffee
temperature. The setting applies to all
types of preparation, except the custom-
ised settings under “Customising”.
Hot water temp.
●Turn the rotary knob 6to set the tem-
perature. The setting applies to all types
of preparation except the customised
settings under “Customising”.
Exit profile
●Here you can set whether the appliance
should exit the customising function
automatically automatic or manually
manually.
Auto off after
●Turn the rotary knob 6to enter the time
span after which the appliance should
automatically switch off following the last
drink preparation.
A time between 5 minutes and 8 hours can
be set.
Cup warm. off in (only TES715)
Here you can set the time span after which
the cup warmer 27 switches off again
automatically.
●Set the required time by turning the rotary
knob 6.
Contrast
The display 5contrast can be set from –10
to +10. The factory setting is +0.
●Turn the rotary knob 6to select the
required setting.
Water hardness
●Turn the rotary knob 6to select the
required water hardness 1, 2, 3 or 4.
Info: It is important to set the water hard-
ness correctly, so that the appliance indi-
cates accurately when the descaling pro-
gramme should be run. The factory setting
for the water hardness is 4.
You can check the water hardness using
the enclosed test strip or by asking your
local water supplier.
● Dip the test strip briey in water and
check the result after one minute.
Level Water hardness
German (°dH) French (°fH)
1
2
3
4
1-7
8-14
15-21
22-30
1-13
14-25
26-38
39-54

14
Robert Bosch Hausgeräte GmbH
en
Water filter
A new water lter must be rinsed before it
can be used.
● To do this, press the water lter rmly
into the water tank 11 with the aid of the
measuring spoon 14. Fill the water tank
with water up to the “max” mark.
●Turn the rotary knob 6to select start
and press the start button 8.
Place 1 l container
Place suction pipe in container  start
●Place a container with a capacity of 1litre
under the milk frother 10.
●Place the end of the suction pipe 10d in
the container.
●Press the start button 8. Water will now
ow through the lter to rinse it.
● Next, empty the container.
The appliance is ready for use again.
Info: Rinsing the lter simultaneously
activates the setting for the “change lter”
display.
You can nd detailed information about the
water lter in the enclosed lter instructions.
The lter is no longer effective when the
Service - change filter display appears, or
at the latest after two months. It needs to be
replaced for reasons of hygiene and so that
there is no build-up of limescale (this could
damage the appliance).
Replacement lters can be obtained from
retailers (TCZ7003) or from customer
service (575491).
If no new lter is used, turn the
Waterfilter setting to no.
Info: If the appliance has not been used for
a prolonged period (for example,when you
are on vacation), the existing lter should
be rinsed before the appliance is used
again. To do this, simply dispense a cup of
hot water.
Transport. lock
●To avoid damage caused by frost during
transport and storage, the appliance must
be completely emptied rst.
Info: The appliance must be ready for use
and the water tank 11 lled.
●Press the start button 8. The appliance
automatically empties the pipe system
and switches off.
●Empty the water tank 11 and the drip
tray 23.
Factory reset
You can cancel your own settings and reset
the factory settings.
●To activate the factory settings, press the
start button 8.
Info: The appliance can also be reset to
the factory settings using a combination of
buttons. The appliance must be switched
off fully.
●Hold down the selection buttons <and >
4and the on/off switch 1 O/I at the same
time for at least 5 seconds. Press the
start button 8. The factory settings are
now reactivated.

15
TES7.. | 08/2013
en
Preparation using
coffee beans
This fully automatic espresso machine
grinds beans freshly for each brew. If pos-
sible, use only beans for fully automatic
coffee and espresso machines. For optimal
quality, deep-freeze the beans or store in
a cool place in sealed containers. Coffee
beans can be ground while frozen.
Important: Fill the water tank 11 with cold,
fresh water every day. The water tank 11
should always contain sufcient water for
operating the appliance.
Tip (only TES715): Pre-warm cups,
especially
small, thick espresso cups, on
the cup warmer 27.
Different coffee drinks can be prepared
quite simply at the press of a button.
Note: With some settings, the cof-
fee is prepared in two stages (see
“AromaDouble Shot”). Wait until the proce-
dure is fully completed.
Drink preparation without milk
The appliance must be ready for use.
●Place the pre-warmed cup(s) under the
coffee outlet 9.
●Select the required 2xEspresso Â,
2xCoffeeÃ, Espresso Àor CoffeeÁ
by turning the rotary knob 6.
The display 5shows the selected drink
along with the setting for coffee strength
and per-cup quantity for this drink.
Espresso
Ë
Í
 à À Á Å Æ
You can change the settings (see “Display
settings”) or call up and customise settings
(see “Customising”).
●Press the start button 8.
The coffee is brewed and then dispensed
into the cup(s).
Drink preparation with milk
The appliance must be ready for use.
●Place the suction pipe 10d of the milk
frother 10 deep in the milk container 26.
●Swivel the coffee outlet 9to the right until
it clicks into place.
●Place the pre-warmed cup or glass under
the coffee outlet 9and milk frother 10.
●Select the required Caffe Latte Ä(only
TES715), Macchiato Å, Cappuccino Æ
or Mycoffee Ç(only TES715) by
turning the rotary knob 6.
The display 5shows the selected drink
along with the setting for coffee strength
and per-cup quantity for this drink.
Cappuccino
Ë
Í
À Á Å Æ È É
You can change the settings (see “Display
settings”) or call up and customise settings
(see “Customising”).
●Press the start button 8.
First milk is delivered into the cup or glass.
Then the coffee is brewed and dispensed
into the cup or glass.
Important: Dried milk residue is difcult
to remove, so the milk frother 10 must be
cleaned with lukewarm water immediately
after use (see “Cleaning the milk system”).

16
Robert Bosch Hausgeräte GmbH
en
Preparation using
ground coffee
This fully automatic espresso machine can
also be operated using ground coffee (not
instant coffee powder).
Note: The AromaDouble Shot function
cannot be used when coffee is prepared
using ground coffee.
Drink preparation without milk
The appliance must be ready for use.
●Place the pre-warmed cup(s) under the
coffee outlet 9.
●Select the required Espresso Àor
CoffeeÁby turning the rotary knob 6.
●Open the powder compartment 18.
●Pour in no more than 2 level measuring
spoons 14 of ground coffee.
¡Warning!
Do not use whole beans or instant coffee.
●Close the powder compartment 18.
●Press the start button 8.
The coffee is brewed and then dispensed
into the cup(s).
Note: Repeat the procedure for another cup
of coffee. If coffee is not dispensed within
90 seconds, the brewing chamber emp-
ties automatically to avoid an overow. The
appliance rinses.
Drink preparation with milk
The appliance must be ready for use.
●Place the suction pipe 10d of the milk
frother 10 deep in the milk container 26.
●Swivel the coffee outlet 9to the right until
it clicks into place.
●Place the pre-warmed cup or glass under
the coffee outlet 9and milk frother 10.
●Select the required Caffe Latte Ä(only
TES715), Macchiato Å, Cappuccino Æ
or Mycoffee Ç(only TES715) by
turning the rotary knob 6.
●Open the powder compartment 18.
●Pour in no more than 2 level measuring
spoons 14 of ground coffee.
¡Warning!
Do not use whole beans or instant coffee.
●Close the powder compartment 18.
●Press the start button 8.
First milk is delivered into the cup or glass.
Then the coffee is brewed and dispensed
into the cup or glass.
Important: Dried milk residue is difcult
to remove, so the milk frother 10 must be
cleaned with lukewarm water immediately
after use (see “Cleaning the milk system”).
Note: Repeat the procedure for another
cup of coffee / milk drink. If coffee is not
dispensed within 90 seconds, the brewing
chamber empties automatically to avoid an
overow. The appliance rinses.